Regency Fireplace Products Energy E18E Quick start guide

MODELS: E18E-NG11 Natural Gas E18E-LP11 Propane

Energy™E18E Gas Insert

Owners &

Installation Manual

www.regency-ﬁre.com

- Do not store or use gasoline or other ﬂammable vapors and liquids in the vicinity of this or any other

appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch: do not use any phone in your building.

Leave the building immediately.

• Immediately call your gas supplier from a neighbour's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the ﬁre department.

- Installation and service must be performed by a qualiﬁed installer, service agency or the gas supplier.

WARNING

FIRE OR EXPLOSION HAZARD

Failure to follow safety warnings exactly could result in serious

injury, death, or property damage.

919-997a FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4 02.15.19

Installer: Please complete the details on the back cover and leave this

manual with the homeowner.

Homeowner: Please keep these instructions for future reference.

Certiﬁed to/Certiﬁé pour: CSA 2.17-2017

ANSI Z21.88-2017

CSA 2.33-2017

Tested by:

fire-parts.com

2 | Regency® E18E-11 Gas Fireplace Insert

CONGRATULATIONS!

You are the owner of a state-of-the-art Gas Insert by:

FPI FIREPLACE PRODUCTS INTERNATIONAL LTD.

The Regency®Gas Fireplace Series has been designed to provide you with all the warmth and charm

of a ﬁreplace, at the ﬂick of a switch. The models E18E-NG and E18E-LP of this series have been

approved by Intertek/Warnock Hersey for safety. As it also bears our own mark, it promises to provide

you with economy, comfort and security for many trouble free years to follow. Please take a moment

now to acquaint yourself with these instructions and the many features of your Regency® Fireplace.

fire-parts.com

Regency® E18E-11 Gas Fireplace Insert | 3

installation

UNIT DIMENSIONS

13 3/4"

349mm

23 15/16"

608mm

14 9/16"

370mm

34 7/16"

875mm

3 15/16"

100mm

11"

280mm

16 5/8"

423mm

23 9/16"

598mm

29 3/8"

747mm

7 1/4"

184mm

1 15/16"

50mm

Diagram 1.1 616-924 -- Low Prole Faceplate shown

Overall Faceplate Dimensions:

616-920 - Low Proﬁle Faceplate (Firesong FS220N) 35 5/8" wide x 29 5/8" High

616-921 - Low Proﬁle Faceplate (Montigo 28F/28F-2/28F-3) 34 1/4" Wide x 28 1/2" High

616-924 - Low Proﬁle Faceplate (Montigo EP28-4/EP28-5/EconoPlus 28C) 34 7/16" wide X 29 3/8" High

616-926 - Low Proﬁle Faceplate (Montigo 36SR) 34 3/8" Wide X 27 1/4" High

616-928 - Low Proﬁle Faceplate (Firesong FS120N) 32 5/8" Wide X 28 1/4" High

617-948 - Low Proﬁle Faceplate Zero Clearance Applications 34 7/8" Wide X 29 3/8" High

NOTE: also includes a perimeter ﬁnishing trim 37 3/8" Wide X 32 1/4" High

fire-parts.com

4 | Regency® E18E-11 Gas Fireplace Insert

table of contents

unit dimensions .......................................................................3

On Demand Pilot Light (seven day safety timer) .....................5

Before You Start .......................................................................7

Important Message ................................................................7

General Safety Information ......................................................7

Lighting Procedure ..................................................................9

Copy of Lighting Plate Instructions ........................................10

Proﬂame I remote control operating instructions ...................11

Warranty ...............................................................................96

Installation Checklist ..............................................................15

Gas Connection .....................................................................15

Pilot Adjustment .....................................................................16

886 S.I.T. Valve Description ...................................................16

Gas Pipe Pressure Testing ....................................................16

High Elevation ........................................................................16

Installation Checklist ..............................................................17

Materials required ..................................................................17

Venting ...................................................................................17

Venting Conﬁgurations ..........................................................17

Minimum Fireplace Clearances to combustibles ...................18

Zero clearance Framing Dimensions .....................................19

Zero Clearance framing .........................................................20

E18E-Separating the outer ﬁrebox shell from inner ﬁrebox ...24

Modiﬁcation of Montigo EP28-2, EP28-4 or EP28-5 .............25

E18E Installation Speciﬁcations ........................................26

EP28-4 / EP28-5 Installation Speciﬁcations ..........................26

Modiﬁcation of Montigo EP28-S2 ..........................................27

Modiﬁcation of MontigoEcono Plus 28C ................................29

Montigo econo plus 28C Installation Speciﬁcations ..............32

Modiﬁcation of Montigo 28F-2 or 28-F ...................................33

28 F / 28 F2 Installation Speciﬁcations ..................................36

Modiﬁcation of Montigo 28F-3 ...............................................37

28F-3 Installation Speciﬁcations ............................................41

Modiﬁcation of Montigo 36SR ................................................42

E18E Install Speciﬁcations ....................................................48

Modiﬁcation of Firesong 120n ...............................................49

E18E Installation Speciﬁcations ............................................52

ﬁresong 120N Installation Speciﬁcations ...............................52

Installation of the E18E into Existing Units ............................53

Installation of the E18E into Existing Units

Step #1: Vent Connection Type A ..........................................53

Step #1: Vent Connection .....................................................53

(Firesong 120n) .....................................................................53

Step #2: Outer Shell Installation .........................................54

Step #3: ﬁrebox Installation ...................................................54

Step #4: Surround Installation ...............................................55

Installation

Zero Clearance faceplate installation ....................................57

Optional Wall Thermostat .....................................................62

Optional Remote Control .......................................................62

Optional Wall Switch ..............................................................62

AC POWER adaptor Installation (for SureFire Systems) .......63

GTM Remote Installation .......................................................64

owner's information

installer's information

Conversion Kit 617-977 - Natural Gas to Propane ................66

Glass Burner Installation / removal ........................................67

Enamel panel Installation ......................................................68

Glass Crystals AND optional Ceramic spa or volcanic ..........69

stones Installation On Burner and Firebox Floor ...................69

Optional Spa or volcanic Stones Installation

(around burner)......................................................................69

Brick panel Installation ...........................................................70

Log Tray Installation ..............................................................71

Log Set Installation ................................................................71

Optional Log Set Installation ..................................................73

Glass Door / screen ...............................................................75

Installation/ removal ...............................................................75

Safety Screen Replacement ..................................................75

Drafthood check ....................................................................76

Safety Switches .....................................................................77

Operation Controls ................................................................77

Fireplace Controls .................................................................77

Copy of the Lighting Plate Instructions ..................................78

Operation

Operating Instructions ...........................................................79

First Fire ................................................................................79

Adjustment .............................................................................79

Maintenance

Maintenance Instructions.......................................................80

First Fire ................................................................................80

Normal Operating Sounds of Gas Appliances .......................80

Log Replacement ..................................................................81

Glass Gasket .........................................................................81

Valve replacement .................................................................82

Installing Valve .......................................................................82

Removing the Fan .................................................................83

Wiring Diagrams ....................................................................84

Wiring diagrams .....................................................................85

Part Lists

Main assembly .......................................................................86

fire-parts.com

Regency® E18E-11 Gas Fireplace Insert | 5

safety decal

This is a copy of the label that accompanies each Regency® Gas Insert. We have

printed a copy of the contents here for your review. The safety label is located on the

front inside base of the unit visible when the bottom louver is open.

Note: Regency® units are constantly being improved. Check the label on the

unit and if there is a difference, the label on the unit is the correct one.

Please note that with the addition of thermostat control and outside

combustion air supply, this unit is approved for bedroom installations.

For the State of Massachusetts, installation and repair must be done by a plumber

or gasﬁtter licensed in the Commonwealth of Massachusetts.

For the State of Massachusetts, ﬂexible connectors shall not exceed 36 inches

in length.

For the State of Massachusetts, the appliances individual manual shut-off must

be a t-handle type valve.

The State of Massachusetts requires the installation of a carbon monoxide alarm

in accordance with NFPA 720 and a CO alarm with battery back up in the same

room where the gas appliance is installed.

DO NOT REMOVE THIS LABEL / NE PAS ENLEVER CETTE ÉTIQUETTE

Serial No. / No de série

500

Min. supply pressure 5" WC (1.25kPa)

Low Setting Man. pressure 1.6" WC (0.40kPa)

Max. Manifold pressure 3.5" WC (0.87kPa)

Orifice size 44 DMS (2.64mm)

Minimum input 15,000 Btu/h (4.40kW)

Altitude 0-4500ft (0-610m)

Maximum input 21,600 Btu/h (6.33kW)

NATURAL GAS FIREPLACE INSERT: MODEL E18E-NG11

PROPANE FIREPLACE INSERT: MODEL E18E-LP11

11" WC (2.74 kPa)

6.4" WC (1.59 kPa)

10" WC (2.49 kPa)

55 DMS (1.6mm)

17,000 Btu/h (4.98kW)

0-4500ft (0-610m)

20,500 Btu/h (6.01kW)

FPI Fireplace Products International Ltd. Delta BC, CANADA

MADE IN CANADA / FABRIQUÉ AU CANADA

Model: E18E-NG11 Model: E18E-LP11

Factory Equipped For Altitude 0-4500ft. (0-1370m)

Duplicate Serial number

Part #: 919-998a

Colour: Black on grey except what is indicated as being printed in red

Size: H-9.98" x W 3.5" (File at 100%)

Material:

Dec. 13/18: Created draft

Jan. 22/19: Rev A - remodeled decal and added ETL logo at the bottom

This appliance must be installed in accordance with local codes, if any; if none,

follow the National Fuel Gas Code, ANSI Z223.1, or Natural Gas and Propane

Installation Code, CSA B149.1.

WARNING. This fireplace has been converted for use with a gas fireplace insert

only and cannot be used for burning wood or solid fuels unless all original parts

have been replaced, and the fireplace re-approved by the authority having

jurisdiction.

Cet appareil doit être installé selon les codes et réglements locaux, ou, en leur

absence, se conformer au National Fuel Gas Code, ANSI Z223.1, ou au Natural

Gas and Propane Installation Code, CSA B149.1.

AVERTISSEMENT : Ce foyer a été converti pour utilisation avec un foyer au gaz

encastrable et ne peut être utilisé pour brûler du bois ou d'autres combustibles

solides à moins que toutes les pièces d'origine aient été remplacées et que le

foyer ait été approuvé de nouveau par l'autorité compétente.

This vented gas fireplace heater is not for use with air filters.

Ne pas utiliser de filtre à air avec ce foyer au gaz à

évacuation.

For use with glass doors certified with the appliance only

Pour utilisation uniquement avec les portes en verre certifiées avec l'appareil

Minimum Clearances to Combustibles:

Dégagements minimaux par rapport

aux matériaux combustibles :

Min. Mantel Height A 17-7/8" (453mm)

Min. Ceiling Height B 37-7/8" (961mm)

D 37-1/2" (953mm)

Side wall E 6" (152mm)

Max. Mantel Depth F 9" (229mm)

Electrical supply / Alimentation électrique 115VAC, 2.5 A, 60Hz,

Less than / Moins de 10A Fan Part # 911-071 / Pièce du ventilateur n 911-071

Min. supply pressure

Low Setting Man. pressure

Max. Manifold pressure

Orifice size

Minimum input

Altitude

Maximum input

Factory Equipped For Altitude 0-4500ft. (0-1370m)

C #: 4001172

VENTED GAS FIREPLACE HEATER - NOT FOR USE WITH

SOLID FUELS. / NE PAS FOYER AU GAZ À ÉVACUATION -

UTILISER AVEC UN COMBUSTIBLE SOLIDE.

For Use Only with Barrier (Part #616-929 )

Utiliser uniquement avec l’écran (n°616-929)

MAY BE INSTALLED IN MANUFACTURED (MOBILE) HOMES AFTER FIRST SALE.

Listed/Nom: VENTED GAS FIREPLACE /

FOYER AU GAZ À ÉVACUATION

Certified to/Certifi : é CSA 2.17-2017

ANSI Z21.88-2017 • CSA-2.33-2017

Refer to Intertek's Directory of Building Products for detailed information.

Pour plus de détails , se reporter au Répertoire des produits de construction de Intertek.

919-998a

CSA P.4.1 Fireplace Efficiency (FE) /

Efficacité énergétique des foyers (EEF) CSA P.4.1

Natural Gas / Gaz naturel 69.42%

Propane Gas / Gaz propane 71.42%

CANADIAN ENERGY

PERFORMANCE

VERIFIED

RENDEMENT

ÉNERGÉTIQUE

VÉRIFIÉ

EP5011169

ON DEMAND PILOT LIGHT (SEVEN DAY SAFETY TIMER)

Important information if using the appliance in CPI (continuous pilot mode) only.

This appliance is a ProFlame 1 system ﬁtted with the “On Demand” Pilot, a safety

feature which will shut down the gas valve completely by extinguishing the pilot

light in the event of a continuous full seven days of inactivity.

This only applies if the CPI (continuous pilot) switch is in the “on” position.

Each time the main burner shuts down, manually or through the call from the

thermostat, the seven day timer starts again.

The seven day inactivity timer is controlled within the circuit board. Therefore, if

in CPI mode and when the pilot light is extinguished after seven straight days

of inactivity, the IPI/CPI rocker switch will remain in the “on” position. Therefore,

all that is required to relight the pilot would be to press the on/off button on the

remote control transmitter from “on” to “off” and back to “on”. Once the pilot has

re-established operation will resume as normal. There is no requirement to do

anything with the IPI/CPI rocker switch.

If the unit never goes as long as seven full days without a call for heat, the pilot

will remain lit until it is manually shut-off.

If the unit is being operated in IPI (intermittent pilot) mode, neither the above

instructions nor the seven day timer will apply.

See the instructions in this manual and on the Lighting Instructions plate on the

appliance to light or re-light the pilot.

fire-parts.com

6 | Regency® E18E-11 Gas Fireplace Insert

requirements

5.08: Modifications to NFPA-54, Chapter 10

(2) Revise 10.8.3 by adding the following additional requirements:

(a) For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for

residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than

seven (7) feet above finished grade in the area of the venting, including but not limited to decks and porches, the following requirements shall

be satisfied:

1. INSTALLATION OF CARBON MONOXIDE DETECTORS. At the time of installation of the side wall horizontal vented gas fueled

equipment, the installing plumber or gasfitter shall observe that a hard wired carbon monoxide detector with an alarm and battery back-up is

installed on the floor level where the gas equipment is to be installed. In addition, the installing plumber or gasfitter shallobserve that a battery

operated or hard wired carbon monoxide detector with an alarm is installed on each additional level of the dwelling, building or structure

served by the side wall horizontal vented gas fueled equipment. It shall be the responsibility of the property owner to secure the services of

qualified licensed professionals for the installation of hard wired carbon monoxide detectors

a. In the event that the side wall horizontally vented gas fueled equipment is installed in a crawl space or an attic, the hard wired carbon

monoxide detector with alarm and battery back-up may be installed on the next adjacent floor level.

b. In the event that the requirements of this subdivision can not be met at the time of completion of installation, the owner shall have a period of

thirty (30) days to comply with the above requirements; provided, however, that during said thirty (30) day period, a battery operated carbon

monoxide detector with an alarm shall be installed.

2. APPROVED CARBON MONOXIDE DETECTORS. Each carbon monoxide detector as required in accordance with the above provisions

shall comply with NFPA 720 and be ANSI/UL 2034 listed and IAS certified.

3. SIGNAGE. A metal or plastic identification plate shall be permanently mounted to the exterior of the building at a minimum height of eight

(8) feet above grade directly in line with the exhaust vent terminal for the horizontally vented gas fueled heating appliance or equipment. The

sign shall read, in print size no less than one-half (1/2) inch in size, "GAS VENT DIRECTLY BELOW. KEEP CLEAR OF ALL

OBSTRUCTIONS".

4. INSPECTION. The state or local gas inspector of the side wall horizontally vented gas fueled equipment shall not approve the installation

unless, upon inspection, the inspector observes carbon monoxide detectors and signage installed in accordance with the provisions of 248 CMR

5.08(2)(a)1 through 4.

(b) EXEMPTIONS: The following equipment is exempt from 248 CMR 5.08(2)(a)1 through 4:

1. The equipment listed in Chapter 10 entitled "Equipment Not Required To Be Vented" in the most current edition of NFPA 54 as adopted by

the Board; and

2. Product Approved side wall horizontally vented gas fueled equipment installed in a room or structure separate from the dwelling, building or

structure used in whole or in part for residential purposes.

Approved side wall horizontally vented gas equipment provides a venting system design or venting system components with the equipment, the

instructions provided by the manufacturer for installation of the equipment and the venting system shall include:

1. Detailed instructions for the installation of the venting system design or the venting system components; and

2. A complete parts list for the venting system design or venting system.

(d) MANUFACTURER REQUIREMENTS - GAS EQUIPMENT VENTING SYSTEM NOT PROVIDED. When the manufacturer of a

Product Approved side wall horizontally vented gas fueled equipment does not provide the parts for venting the flue gases, but identifies

"special venting systems", the following requirements shall be satisfied by the manufacturer:

1. The referenced "special venting system" instructions shall be included with the appliance or equipment installation instructions; and

2. The "special venting systems" shall be Product Approved by the Board, and the instructions for that system shall include a parts list and

detailed installation instructions.

(e) A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled equipment, all venting instructions,

all parts lists for venting instructions, and/or all venting design instructions shall remain with the appliance or equipmentat the completion of

the installation.

MA Code - CO Detector

(for the State of Massachusetts only)

fire-parts.com

Regency® E18E-11 Gas Fireplace Insert | 7

owner's information

BEFORE YOU START

Safe installation and operation of this appliance

requires common sense, however, we are required

by the Canadian Safety Standards and ANSI

Standards to make you aware of the following:

CLOTHING OR OTHER FLAMMABLE

MATERIAL SHOULD NOT BE PLACED

ON OR NEAR THE APPLIANCE.

CHILDREN AND ADULTS SHOULD BE

ALERTED TO THE HAZARDS OF HIGH

SURFACE TEMPERATURES, ESPE-

CIALLY THE FIREPLACE GLASS, AND

SHOULD STAY AWAYTO AVOID BURNS

OR CLOTHING IGNITION.

INSTALLATION AND REPAIR SHOULD

BE DONE BY AN AUTHORIZED

SERVICE PERSON. THE APPLIANCE

SHOULD BE INSPECTED BEFORE

USE AND AT LEAST ANNUALLY BY A

PROFESSIONAL SERVICE PERSON.

MORE FREQUENT CLEANING MAY

BE REQUIRED DUE TO EXCESSIVE

LINT FROM CARPETING, BEDDING

MATERIAL, ETC.IT IS IMPERATIVETHAT

CONTROLCOMPARTMENTS,BURNERS

AND CIRCULATING AIR PASSAGEWAYS

OF THE APPLIANCE BE KEPT CLEAN.

DUE TO HIGH TEMPERATURES, THE

APPLIANCE SHOULD BE LOCATED

OUT OF TRAFFIC AND AWAY FROM

FURNITURE AND DRAPERIES.

WARNING: FAILURE TO INSTALL THIS

APPLIANCE CORRECTLY WILL VOID

YOUR WARRANTY AND MAY CAUSE A

SERIOUS HOUSE FIRE.

YOUNG CHILDREN SHOULD BE CARE-

FULLY SUPERVISED WHEN THEY ARE

IN THE SAME AREA AS THE APPLI-

ANCE. TODDLERS,YOUNG CHILDREN

AND OTHERS MAY BE SUSCEPTIBLE

TO ACCIDENTAL CONTACT BURNS. A

PHYSICAL BARRIERS IS RECOMMEND-

ED IFTHERE ARE AT RISK INDIVIDUAL

INTHE HOUSE. TO RESTRICT ACCESS

TO A FIREPLACE OR STOVE, INSTALL

AN ADJUSTABLE SAFETY GATE TO

KEEP TODDLERS, YOUNG CHILDREN

AND OTHER AT RISK INDIVIDUALS OUT

OF THE ROOM AND AWAY FROM HOT

SURFACES.

IMPORTANT MESSAGE

SAVE THESE INSTRUCTIONS

The Regency® Gas Fireplace must be installed in

accordance with these instructions. Carefully read

all the instructions in this manual ﬁrst. Consult the

"authority having jurisdiction" to determine the need

for a permit prior to starting the installation. It is the

responsibility of the installer to ensure this ﬁreplace

is installed in compliance with the manufacturer's

instructions and all applicable codes.

GENERAL SAFETY

INFORMATION

The condition of the appliance, that the E18E is

to be installed into, shall be in accordance with

reasonable concepts of safety, substantiality and

durability. Component parts shall be well ﬁtted and

not show signs of becoming warped, bent, broken

or otherwise damaged during the installation. Every

part of the appliance shall be secured against

displacement and constructed to maintain a ﬁxed

relationship between essential parts under normal

and reasonable conditions of handling and usage.

1. The appliance installation must conform with

local codes or, in the absence of local codes,

with the current Canadian or National Gas

Codes, CAN1-B149 or ANSI Z223.1 Installation

Codes.

2. The appliance when installed, must be electri-

cally grounded in accordance with local codes,

or in the absence of local codes with the current

National Electrical Code, ANSI/NFPA 70 or CSA

C22.1 Canadian Electrical Code.

3. See general construction and assembly in-

structions. The appliance and vent should be

enclosed.

4. This appliance must be connected to the speci-

ﬁed vent and termination cap to the outside of

the building envelope. Never vent to another

room or inside a building. Make sure that the

vent is installed as per Venting instructions.

5. This appliance may only be installed in an ap-

proved zero clearance gas appliances listed in

this manual, or as a zero clearance appliance.

6. This appliance is Listed for bedroom installations

when used with a Listed Millivolt Thermostat.

Outside combustion air supply is also required.

Some areas may have further requirements,

check local codes before installation.

7. This appliance is Listed for Alcove installations,

maintain minimum Alcove clearances as follows,

minimum ceiling height of 37-7/8" from the top

of the glass door, minimum width of 49" and a

maximum depth of 29".

8. Inspect the venting system annually for blockage

and any signs of deterioration.

9. Any safety glass removed for servicing must be

replaced prior to operating the appliance.

10. To prevent injury, do not allow anyone who is

unfamiliar with the operation to use the ﬁreplace

insert.

11. Wear gloves and safety glasses for protection

while doing required maintenance.

12. Ensure adequate combustion and ventilation

air.

13. Under no circumstances should this appliance

be modiﬁed. Parts that have to be removed for

servicing should be replaced prior to operating

this appliance.

14. Installation and any repairs to this appliance

should be done by a qualiﬁed service person. A

professional service person should be called to

inspect this appliance annually. Make it a prac-

tice to have all of your gas appliances checked

annually.

15. Unit is not designed to be installed with a

powervent system.

16. Do not slam shut or strike the glass door.

A BARRIER DESIGNED TO REDUCE

THE RISK OF BURNS FROM THE HOT

VIEWING GLASS IS PROVIDED WITH

THIS APPLIANCE AND SHALL BE

INSTALLED FOR THE PROTECTION

OF CHILDREN AND OTHER AT-RISK

INDIVIDUALS

IFTHE BARRIER BECOMES DAMAGED,

THE BARRIER SHALL BE REPLACED

WITHTHE MANUFACTURER'S BARRIER

FOR THIS APPLIANCE.

ANY SAFETY SCREEN, GUARD, OR

BARRIER REMOVED FOR SERVICING

AN APPLIANCE MUST BE REPLACED

PRIORTOOPERATINGTHE APPLIANCE.

fire-parts.com

8 | Regency® E18E-11 Gas Fireplace Insert

owner's information

17. Under no circumstances should any solid fuels

(wood, paper, cardboard, coal, etc.) be used in

this appliance.

18. The appliance area must be kept clear and

free of combustible materials, (gases and other

ﬂammable vapours and liquids).

19. Do not use this appliance if any part has been

under water. Immediately call a qualiﬁed ser-

vice technician to inspect the appliance and to

replace any part of the electrical control system

and any gas control which has been under water.

20. WARNING: Failure to position the

parts in accordance with the diagrams

in this manual or failure to use only

parts speciﬁcally approved with this

appliance may result in property

damage or personal injury.

21. WARNING: Operation of this appliance

when not connected to a properly

installed and maintained venting

system or tampering with the blocked

vent shut-off system can result in

carbon monoxide (CO) poisoning and

possible death.

fire-parts.com

Regency® E18E-11 Gas Fireplace Insert | 9

owner's information

LIGHTING PROCEDURE

IMPORTANT: The remote control system supplied with this appliance has

several options for starting/operating the appliance using the power button

and ON/OFF key on the hand held transmitter.

Prior to operating this appliance, please read the remote control operating

instructions (packaged with remote control) to understand how to operate

this remote control system. Option to download remote functions video

with QR code below.

1. Ensure the wall switch/receiver is in the remote position. (see Diagram 1).

3. After approximately 4 seconds the spark ignition system will spark for 60

seconds to light the main burner.

4. The unit will turn on.

Note: The ﬁrst try for ignition will last approximately 60 seconds. If there is no

ﬂame ignition (rectiﬁcation) the board will stop sparking for approximately

35 seconds. After wait time , the board will start second try for ignition by

sparking for approximately 60 seconds. If there is still no positive ignition

the board will go into lock out.

The system will need to be reset as follows:

a) Turn the system off using ON/OFF switch or press ON/OFF button - if

using remote.

b) After approximately 2 seconds turn on ON/OFF switch or press ON/OFF

button if using remote.

c) Repeat step 2.

ON/OFF

Button

Diagram 1

Diagram 2

Set Switch to

Remote

SHUTDOWN PROCEDURE

1. Turn the wall mounted switch or remote to the "OFF" position.

2. Press "OFF" on the remote control.

3. Turn the gas control knob to the "OFF" position to turn off the pilot.

Remote shown in Manual Mode on Hi

Proame

video

2. Press and release the ON/OFF button on the remote handheld transmit-

ter (see Diagram 2). An audible beep should be heard from the receiver.

fire-parts.com

10 | Regency® E18E-11 Gas Fireplace Insert

owner's information

COPY OF LIGHTING PLATE INSTRUCTIONS

919-401a

Part #: 919-401a

Colours: Black on Grey, except

for parts indicated as being

Red.

Size: 100%

w- 5.16"

h- 10.3"

June 23/14: Created decal

Sept.29/14: Rev. A - Updated shut-

down procedure.

A) This appliance is equipped with an ignition device which automatically lights the pilot.

Do not try to light the pilot by hand.

B) BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the ﬂ oor

because some gas is heavier than air and will settle on the ﬂ oor.

WHAT TO DO IF YOU SMELL GAS

- Do not try to light any appliance.

- Do not touch any electric switch, do not use any phone in your building.

- Immediately call your gas supplier from a neighbours phone. Follow the gas supplier’s instructions.

- If you cannot reach your gas supplier, call the ﬁre department.

C) Do not use this appliance if any part has been under water. Immediately call a qualiﬁed service

technician to inspect the appliance and replace any part of the control system and any

gas control which has been underwater.

A) Cet appareil est muni d’un dispositif d’allumage qui allume automatiquement la veilleuse.

Ne tentez pas d’allumer la veilleuse manuellement.

B) AVANT LA MISE EN MARCHE, reniﬂez tout autour de l’appareil pour déceler une odeur de gaz. Reniﬂez au niveau

du plancher, car certains gaz sont plus lourds que l’air et peuvent s’accumuler au niveau du sol.

QUE FAIRE SI VOUS SENTEZ UNE ODEUR DE GAZ :

• Ne tentez pas d’allumer l’appareil

• Ne touchez à aucun interrupteur; n'utilisez pas de téléphones se trouvant dans le bâtiment.

• Appelez immédiatement votre fournisseur de gaz depuis un téléphone extérieur. Suivez les

instructions du fournisseur.

• Si vous ne pouvez pas rejoindre le fournisseur, appelez le service incendie.

C) N’utilisez pas cet appareil s’il a été plongé dans l’eau, même partiellement. Faites inspecter l’appareil par un tech-

nicien qualiﬁé et remplacez toute partie du système de contrôle et toute commande qui ont été plongés dans l’eau.

DO NOT REMOVE THIS INSTRUCTION PLATE

TO TURN OFF GAS APPLIANCE

This appliance must be installed in accordance with local codes, if any;

if none, follow the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or

Natural Gas and Propane Installation Codes, CSA B149.1.

CAUTION: Hot while in operation. Do not touch. Severe Burns may result. Due to high surface

temperatures keep children, clothing and furniture, gasoline and other liquids having ﬂammable

vapors away. Keep burner and control compartment clean. See installation and operating

instructions accompanying appliance.

WARNING: If you do not follow these instructions exactly, a fire or explosion may result

causing property damage, personal injury or loss of life. Improper installation, adjustment,

alteration, service or maintenance can cause injury or property damage. Refer to the owner’s

information manual provided with this appliance. For assistance or additional information

consult a qualified installer, service agency or gas supplier.

AVERTISSEMENT. Quiconque ne respecte pas à la lettre les instructions dans la présente notice

risquede déclencher un incendie ou une explosion entraînant des dommages, des blessures ou

la mort.

Une installation, d'ajustement, de modiﬁcation, de service ou d'entretien peut provoquer

des blessures ou des dommages matériels. Reportez-vous au manuel du propriétaire de

l'information fournie avec cet appareil. Pour obtenir de l'aide ou des informations supplémen-

taires consulter un installateur qualiﬁé, une agence de service ou fournisseur de gaz.

1) Ensure the wall switch/receiver is in the remote position.

2) Press and release the ON/OFF button on the remote handheld transmitter. An audible beep should be

heard from the receiver.

3) After approximately 4 seconds the spark ignition system will spark for 60 seconds to light the main burner.

4) The unit will turn on.

Note: The ﬁrst attempt to ignition will last approximately 60 seconds. If there is no ﬂame ignition (rectiﬁca-

tion) the board will stop sparking for approximately 35 seconds. After this wait time, the board will start a

second try for ignition by sparking for approximately 60 seconds. If there is still no positive ignition after the

second attempt the board will go into lock out.

The system will need to be reset as follows (after going into lock out mode):

a) Wait 5 minutes - turn the system off using ON/OFF switch or press ON/OFF button if using

remote

b) After approximately 2 seconds turn on ON/OFF switch or press ON/OFF button if using remote.

c) Unit will repeat step 2.

1) S’assurer que l’interrupteur mural/récepteur soit sur ''Remote''.

2) Appuyer sur la touche ON/OFF de la télécommande puis relâcher. Un bip se fera entendre depuis le

récepteur

3) Après environ 4 secondes, le système d'allumage par étincelles se mettra en marche pendant 60 secondes

pour allumer le brûleur principal.

4) L'appareil s’allume.

Remarque : Au premier allumage, le système tente d’allumer les ﬂammes pendant 60 secondes. Si l’essai

est infructueux, le système fait une pause de 35 secondes. C’est ce qu'on appelle l'étape de rectiﬁcation.

Ce délai écoulé, le système tente à nouveau d'allumer les ﬂammes en produisant des étincelles pendant 60

secondes. Si les ﬂammes ne s’allument toujours pas, le système se met en mode verrouillage.

Il faut alors le réinitialiser en suivant les étapes ci-dessous (pour le déverrouiller) :

a) Attendre 5 minutes puis éteindre l’appareil en utilisant l’interrupteur ou la touche ON/OFF de la

télécommande.

b) Attendre 2 secondes et rallumer le système à l’aide de l’interrupteur ou de la télécommande.

c) L'appareil répètera l'étape 2.

1) Turn the wall mounted switch or remote to the "OFF" position.

2) If service is to be performed–you must disconnect power and shut off gas to the unit.

1) Utiliser l'interrupteur mural ou la télécommande pour mettre le système sur ''OFF''.

2) Lors de l'entretien de l'appareil –débrancher l'alimentation électrique et couper le gaz de l'appareil.

LIGHTING INSTRUCTIONS

FOR YOUR SAFETY READ BEFORE LIGHTING

fire-parts.com

This manual suits for next models

Table of contents

Other Regency Fireplace Products Indoor Fireplace manuals

Regency Fireplace Products

Regency Fireplace Products Horizon HZ40E Quick start guide

Regency Fireplace Products

Regency Fireplace Products P48-1 Quick start guide

Regency Fireplace Products

Regency Fireplace Products P48 Quick start guide

Regency Fireplace Products

Regency Fireplace Products Bellavista B41XTCE-NG10 Quick start guide

Regency Fireplace Products

Regency Fireplace Products Greenfire GF900C-NG1 Quick start guide

Regency Fireplace Products

Regency Fireplace Products P36D-NG1 Quick start guide

Regency Fireplace Products

Regency Fireplace Products P42 Quick start guide

Regency Fireplace Products

Regency Fireplace Products Bellavista B41XTE-NG11 Quick start guide

Regency Fireplace Products

Regency Fireplace Products L390E Quick start guide

Regency Fireplace Products

Regency Fireplace Products Excalibur P90EX Quick start guide

Regency Fireplace Products

Regency Fireplace Products Skope E110-2 User manual

Regency Fireplace Products

Regency Fireplace Products PROFIBUS I1150S Quick start guide

Regency Fireplace Products

Regency Fireplace Products H2103 Quick start guide

Regency Fireplace Products

Regency Fireplace Products H2100 Quick start guide

Regency Fireplace Products

Regency Fireplace Products CI2700 Quick start guide

Regency Fireplace Products

Regency Fireplace Products E18 Quick start guide

Regency Fireplace Products

Regency Fireplace Products Energy U31-NG10 User manual

Regency Fireplace Products

Regency Fireplace Products I1200S Wood Insert Quick start guide

Regency Fireplace Products

Regency Fireplace Products PG33-NG Quick start guide

Regency Fireplace Products

Regency Fireplace Products Greenfire GF1500L Quick start guide

Regency Fireplace Products

Regency Fireplace Products P33-4 Quick start guide

Regency Fireplace Products

Regency Fireplace Products I2400M Quick start guide

Regency Fireplace Products

Regency Fireplace Products U900E-NG11 Quick start guide

Regency Fireplace Products

Regency Fireplace Products City Series ACV40ENG Quick start guide

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual