Redx RX Series User manual
RX SERIES ALL IN ONE
RX-2505PW
User Manual
No part of this document can be reproduced in any form or by any means without the prior written
permission of Redx.
and other Redx trademarks used in this manual are owned by Redx.
All other trademarks or registered trademarks mentioned in this document are owned by
their respective owners.
It is prohibited to use data confirmed in firmware or software developed by Redx, in part or in full,
for commercial purposes by any means.
It is prohibited to perform reverse engineering, cracking, or any other operations that compromise
the original program design of the software developed by Redx.
All Rights Reserved
Trademarks
Software Licenses
Contact Us
Redx Technology Australia Pty Ltd
Address: U2 /21 Millennium Circuit, Helensvale, Australia 4212
Tel: +61 7 5672 9983
Email: info@redxenergy.com.au
Website: www.redxenergy.com.au
ABN: 76614340546
This manual mainly describes the product information, installation, operation, and maintenance guidelines
of the Redx energy storage system. Please read this manual carefully before using this product and store
the manual in a safe place. Redx will not notify the user of any changes to this manual.
About This Manual
This manual applies to the RX-2505PW all in one energy storage integrated system. The system must be
installed by a qualified / licensed technician. The battery chemistry in the all-in-one energy storage system
is lithium iron phosphate. We strongly recommend that installers read this manual carefully. Themanual
includes the guidance on product installation, troubleshooting, communication and other aspects.
1 Safety……….………………………………...……………..........................................................1
1.1 Important Safety Instructions……….………………………………...…..........................1
2 Product Introduction……….………………………………...…………….................................3
2.1 System Diagram……….………………………………...……………...............................3
2.2 Production Introduction……….………………………………...………........................... 4
2.2.1 Appearance and Dimensions……….…………………...............................................4
2.3 Dimensions and Weight……….……………………………............................................5
2.4 LED Indicator Panel and Switches……….……………………………............................6
2.5 Name Plate Labelling……….………………………………...……….............................. 6
2.5.1 Product Benefits……….………………………………...…………….............................8
2.6 Scope of Delivery……….………………………………...……………..............................8
2.7 Storage ……….………………………………...……………............................. ............ 8
3 Installation……….………………………………...……………..................... ............................9
3.1 Installation Preparation……….………………………………...……… ...........................9
3.2 Installation Tools……….………………………………...……………..............................10
4 Installation Guide……….………………………………...……………......................................11
4.1 System Wiring Diagram……….………………………………...……… ..........................11
4.2 Installation Procedure……….………………………………...………..............................12
4.3 Earth Connection……….………………………………...……………. ............................12
5 Cable Connection……….………………………………...……………......................................13
5.1 Connect Cables to the AC Grid Side and off-Grid Side……….……….........................13
5.2 Connect Cables to DC1 and DC2……….………………………………...……...............15
5.3 CT/METER Connection……….………………………………...……..............................18
5.4 External RS 485 Connection……….………………………………..... ........................... 20
5.5 Connection of DRM0 Terminal (Australia Only)……………………..... .........................21
6 Operation……….………………………………...……………………….....................................22
6.1 Checklist before operation……….……………………………….....…............................ 22
6.2 Operation checks……….………………………………...……………............................. 22
6.3 Operation modes……….………………………………...…………….. ...........................22
6.3.1 Operating modes…….………………………………...…………….. ............................22
6.3.2 Fault state…….………………………………...…………….. .......................................23
6.3.3 Firmware update…….………………………………...…………….. .............................23
6.3.4 Self-check Status…….………………………………...…………….. ...........................23
6.3.5 Standby Status…….………………………………...…………….. ................................23
6.3.6 Protection Mode…….………………………………...…………….. ..............................23
6.3.7 Shutdown Status…….………………………………...…………….. .............................23
6.4 Communication…….………………………………...…………….. ..................................24
7 RX-2505PW System Turn on and Turn off……….…………………….....…..........................24
7.1 Turn on RX-2505PW System……….……………………………...….............................24
7.2 Turn off RX-2505PW System……….………………………………............................... 24
8 Troubleshooting & Maintenance……….………………………………...…............................24
8.1 Troubleshooting……….………………………………...…………...................................24
8.2 Maintenance……….………………………………...……………........ .......................... ..27
8.3 Routine Maintenance……….………………………………...………............................ ..28
9 Redx Power App……….………………………………...……………........................................28
10 Quality Assurance……….………………………………...……………...... .............................28
11 Appendix……….………………………………...……………..................................................29
11.1 Product Specification……….………………………………...……….............................29
11.2 Optional Accessories……….………………………………...……….............................32
12 Contact……….………………………………...……………......................... ............................33
Contents
1 Safety……….………………………………...……………..........................................................1
1.1 Important Safety Instructions……….………………………………...…..........................1
2 Product Introduction……….………………………………...…………….................................3
2.1 System Diagram……….………………………………...……………...............................3
2.2 Production Introduction……….………………………………...………........................... 4
2.2.1 Appearance and Dimensions……….…………………...............................................4
2.3 Dimensions and Weight……….……………………………............................................5
2.4 LED Indicator Panel and Switches……….……………………………............................6
2.5 Name Plate Labelling……….………………………………...……….............................. 6
2.5.1 Product Benefits……….………………………………...…………….............................8
2.6 Scope of Delivery……….………………………………...……………..............................8
2.7 Storage ……….………………………………...……………............................. ............ 8
3 Installation……….………………………………...……………..................... ............................9
3.1 Installation Preparation……….………………………………...……… ...........................9
3.2 Installation Tools……….………………………………...……………..............................10
4 Installation Guide……….………………………………...……………......................................11
4.1 System Wiring Diagram……….………………………………...……… ..........................11
4.2 Installation Procedure……….………………………………...………..............................12
4.3 Earth Connection……….………………………………...……………. ............................12
5 Cable Connection……….………………………………...……………......................................13
5.1 Connect Cables to the AC Grid Side and off-Grid Side……….……….........................13
5.2 Connect Cables to DC1 and DC2……….………………………………...……...............15
5.3 CT/METER Connection……….………………………………...……..............................18
5.4 External RS 485 Connection……….………………………………..... ........................... 20
5.5 Connection of DRM0 Terminal (Australia Only)……………………..... .........................21
6 Operation……….………………………………...……………………….....................................22
6.1 Checklist before operation……….……………………………….....…............................ 22
6.2 Operation checks……….………………………………...……………............................. 22
6.3 Operation modes……….………………………………...…………….. ...........................22
6.3.1 Operating modes…….………………………………...…………….. ............................22
6.3.2 Fault state…….………………………………...…………….. .......................................23
6.3.3 Firmware update…….………………………………...…………….. .............................23
6.3.4 Self-check Status…….………………………………...…………….. ...........................23
6.3.5 Standby Status…….………………………………...…………….. ................................23
6.3.6 Protection Mode…….………………………………...…………….. ..............................23
6.3.7 Shutdown Status…….………………………………...…………….. .............................23
6.4 Communication…….………………………………...…………….. ..................................24
7 RX-2505PW System Turn on and Turn off……….…………………….....…..........................24
7.1 Turn on RX-2505PW System……….……………………………...….............................24
7.2 Turn off RX-2505PW System……….………………………………............................... 24
8 Troubleshooting & Maintenance……….………………………………...…............................24
8.1 Troubleshooting……….………………………………...…………...................................24
8.2 Maintenance……….………………………………...……………........ .......................... ..27
8.3 Routine Maintenance……….………………………………...………............................ ..28
9 Redx Power App……….………………………………...……………........................................28
10 Quality Assurance……….………………………………...……………...... .............................28
11 Appendix……….………………………………...……………..................................................29
11.1 Product Specification……….………………………………...……….............................29
11.2 Optional Accessories……….………………………………...……….............................32
12 Contact……….………………………………...……………......................... ............................33
1.1 Important Safety Instructions
The energy storage system has been designed and tested strictly according to international safety
regulations. Read all safety instructions carefully prior to any work and always observe them when
working with the energy storage system.
Incorrect Operation or Work may cause:
Injury or death to the operator or third party.
Damage to the inverter and other property
or third party.
Safety Instructions
⑴Do not open the case as risk of electric shock is present.
⑵Maintenance should be carried out by a professional licensed technician.
⑶Read this manual before operating the system. Redx is not responsible for failure or loss arising
out of improper operation.
⑷All wiring, installation, commissioning, and other work should be done by a professional licensed
technician.
⑸Ensure that the storage unit is not installed or used in the following locations：
1. Poorly ventilated room.
Places with inflammable gases or corrosive materials and large amounts of dust.
High or low environment temperature (above 50°C or below 0°C), or high humidity
(greater than 90%).
In direct sunlight or near heating equipment.
Outdoors (indoor installation only)
Do not use anything to cover the inlet and exhaust of the module.
In case of fire, use dry powder fire extinguishers instead of liquid fire extinguishers.
2.
•
•
3.
4.
5.
6.
All electrical connections are subject to the local grid safety regulations and the storage system should be
reconnected to the grid under conditions of approval.
1 Safety
Rev 20221130
RX2505PW
Page 1 of 35
Removal of any protection, incorrect use, incorrect installation, or incorrect
operation may result in death / serious personal injury or device damage.
Transportation, loading and unloading, installation, start-up and maintenance
must be carried out by qualified or trained engineer/technician.
Before maintenance or touching any parts, or installation, make sure that the
energy storage unit is disconnected and wait 5 minutes to ensure that the
internal capacitor is discharged
Do not connect the N of grid to the N of EPS output, Do not connect the grid
cable to the UPS output, otherwise it may cause serious damage to the
system and load.
Installation must be in full compliance with national and local laws and regulations.
Ensure that the system is positioned correctly and is not allowed to roll sideways
or upside down.
Do not change the internal circuit of the machine without permission.
Before connecting to the grid, system frame must be connected to the protective
earth ground. Follow the instructions. Improper operation may cause serious damage.
There is a 4G / WIFI device inside the system, do not place the system in an
environment where there is no 4G / WIFI signal.
5min
Danger!
Danger!
Danger!
Warning!
Warning!
Warning!
Warning!
Notice!
Table 1-1 - Warnings
Rev 20221130
RX2505PW
Page 2 of 35
2.1 System Diagram
The RX-2505PW system uses the grid and battery to ensure the continuous power supply to important
loads. The system allows users to store the energy from grid into the battery, and send the stored energy
to the grid when needed. It can also provide backup power during a power outage.
Figure 2-1 shows the application of the RX-2505PW all-in-one energy storage system. RX-2505PW contains
the inverter and battery storage modules. It is important to keep the installation environment well ventilated
and take necessary measures to control the ambient temperature to avoid the risk of explosion caused by
excessive battery temperature.
The product is not tested to section 5 of AS/NZS 4777.2:2020 and is
not to be used in multiple inverter combinations without additional
considerations by the system designer.
The load capacity of the output of the inverter is as follows:
Inductive load (such as air conditioning, washing machine, motor, etc.):
Single maximum power 1.5kVA, total inductive load maximum power
2.5kVA (with grid power).
Capacitive load (e.g. computer, switching power supply, etc.) :
The maximum power of the total capacitive load is1.5kVA (without grid
power), The maximum power of the total capacitive load is 2.5KVA(with
grid power).
Warning!
Warning!
2 Product Introduction
Figure 2-1 – System block diagram
Solar
Switchboard
Back-up
appliances
Cloud monitoring
and control
Main Switch Utility Meter Grid
Wind
Rev 20221130
RX2505PW
Page 3 of 35
2.2 Production Introduction
2.2.1 Appearance and Dimensions
11
12
51
2
3 4
8
7
10 9
6
Figure 2-2 – Battery system components
NameItems
1 Main power Switch
Battery air circuit-breaker
DC1 port
DC2 port
Battery status indicator
DRM0 RJ45 Terminal
RS485(USB)
CT / Meter Terminal
AC Terminal
EPS Terminal
Mounting bracke
Rear cover bracket
2
3
4
5
6
7
8
9
10
11
12
Table 2-1 – Battery components details
Rev 20221130
RX2505PW
Page 4 of 35
2.3 Dimension and Weight
A（mm）
145
B（mm）
600
C（mm）
900
Weight
75Kg
AB
Table 2-2 – Battery systems dimensions details
Figure 2-3 – Battery system dimensions
C
Rev 20221130
RX2505PW
Page 5 of 35
Other manuals for RX Series
4
This manual suits for next models
1
Table of contents
Other Redx Storage manuals
