Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER... User manual
Red Hat Enterprise Linux 5
Configuration Example
- NFS Over GFS
Configuring NFS over GFS in a Red Hat Cluster
Configuration Example - NFS Over GFS
Red Hat Enterprise Linux 5 Configuration Example - NFS Over
GFS
Configuring NFS over GFS in a Red Hat Cluster
Edition 3
Copyright © 2009 Red Hat Inc.. This material may only be distributed subject to the terms and
conditions set forth in the Open Publication License, V1.0 or later (the latest version of the OPL is
presently available at http://www.opencontent.org/openpub/).
Red Hat and the Red Hat "Shadow Man" logo are registered trademarks of Red Hat, Inc. in the United
States and other countries.
All other trademarks referenced herein are the property of their respective owners.
1801 Varsity Drive
Raleigh, NC 27606-2072 USA
Phone: +1 919 754 3700
Phone: 888 733 4281
Fax: +1 919 754 3701
PO Box 13588 Research Triangle Park, NC 27709 USA
This book describes a procedure for configuring NFS over GFS in a 5-node Red Hat Cluster using
Conga.
iii
Introduction v
1. About This Guide ............................................................................................................ v
2. Audience ........................................................................................................................ v
3. Software Versions ........................................................................................................... v
4. Related Documentation ................................................................................................... v
5. Feedback ....................................................................................................................... vi
6. Document Conventions ................................................................................................... vi
6.1. Typographic Conventions ..................................................................................... vi
6.2. Pull-quote Conventions ....................................................................................... viii
6.3. Notes and Warnings ............................................................................................ ix
1. NFS over GFS in a Red Hat Cluster 1
2. Prerequisite Configuration 3
3. Components to Configure 5
4. Configuring the Cluster Resources 7
4.1. Configuring an IP Address Resource ............................................................................. 7
4.2. Configuring a GFS Resource ........................................................................................ 7
4.3. Configuring an NFS Export Resource ............................................................................ 8
4.4. Configuring NFS Client Resources ................................................................................ 8
5. Configuring an NFS Cluster Service 11
5.1. Add a Service to the Cluster ....................................................................................... 11
5.2. Adding an IP Address Resource to an NFS Service ..................................................... 12
5.3. Adding a GFS Resource to an NFS Service ................................................................ 12
5.4. Adding an NFS Export Resource to an NFS Service .................................................... 13
5.5. Adding NFS Client Resources to an NFS Service ......................................................... 13
6. Testing the NFS Cluster Service 15
7. Troubleshooting 17
8. The Cluster Configuration File 21
9. Configuration Considerations 25
A. Revision History 27
Index 29
iv
v
Introduction
1. About This Guide
This book describes a procedure for configuring NFS over GFS in a 5-node Red Hat Cluster using
Conga.
2. Audience
This book is intended to be used by system administrators managing systems running the Linux
operating system. It requires familiarity with Red Hat Enterprise Linux 5, Red Hat Cluster Suite, GFS
file system administration, and basic knowledge of NFS administration.
3. Software Versions
Software Description
RHEL5 refers to RHEL5 and higher
GFS refers to GFS for RHEL5 and higher
Table 1. Software Versions
4. Related Documentation
For more information about using Red Hat Enterprise Linux, refer to the following resources:
•Red Hat Enterprise Linux Installation Guide — Provides information regarding installation of Red
Hat Enterprise Linux 5.
•Red Hat Enterprise Linux Deployment Guide — Provides information regarding the deployment,
configuration and administration of Red Hat Enterprise Linux 5.
For more information about Red Hat Cluster Suite for Red Hat Enterprise Linux 5, refer to the following
resources:
•Red Hat Cluster Suite Overview — Provides a high level overview of the Red Hat Cluster Suite.
•Configuring and Managing a Red Hat Cluster — Provides information about installing, configuring
and managing Red Hat Cluster components.
•LVM Administrator's Guide: Configuration and Administration — Provides a description of the
Logical Volume Manager (LVM), including information on running LVM in a clustered environment.
•Global File System: Configuration and Administration — Provides information about installing,
configuring, and maintaining Red Hat GFS (Red Hat Global File System).
•Global File System 2: Configuration and Administration — Provides information about installing,
configuring, and maintaining Red Hat GFS2 (Red Hat Global File System 2).
•Using Device-Mapper Multipath — Provides information about using the Device-Mapper Multipath
feature of Red Hat Enterprise Linux 5.
Introduction
vi
•Using GNBD with Global File System — Provides an overview on using Global Network Block
Device (GNBD) with Red Hat GFS.
•Linux Virtual Server Administration — Provides information on configuring high-performance
systems and services with the Linux Virtual Server (LVS).
•Red Hat Cluster Suite Release Notes — Provides information about the current release of Red Hat
Cluster Suite.
Red Hat Cluster Suite documentation and other Red Hat documents are available in HTML,
PDF, and RPM versions on the Red Hat Enterprise Linux Documentation CD and online at http://
www.redhat.com/docs/.
5. Feedback
If you spot a typo, or if you have thought of a way to make this manual better, we would love to
hear from you. Please submit a report in Bugzilla (http://bugzilla.redhat.com/bugzilla/) against the
component rh-cs.
Be sure to mention the manual's identifier:
Bugzilla component: Documentation-cluster
Book identifier: Cluster_Config_Example_NFS_GFS(EN)-5 (2009-01-05T15:20)
By mentioning this manual's identifier, we know exactly which version of the guide you have.
If you have a suggestion for improving the documentation, try to be as specific as possible. If you have
found an error, please include the section number and some of the surrounding text so we can find it
easily.
6. Document Conventions
This manual uses several conventions to highlight certain words and phrases and draw attention to
specific pieces of information.
In PDF and paper editions, this manual uses typefaces drawn from the Liberation Fonts1 set. The
Liberation Fonts set is also used in HTML editions if the set is installed on your system. If not,
alternative but equivalent typefaces are displayed. Note: Red Hat Enterprise Linux 5 and later includes
the Liberation Fonts set by default.
6.1. Typographic Conventions
Four typographic conventions are used to call attention to specific words and phrases. These
conventions, and the circumstances they apply to, are as follows.
Mono-spaced Bold
Used to highlight system input, including shell commands, file names and paths. Also used to highlight
key caps and key-combinations. For example:
1 https://fedorahosted.org/liberation-fonts/
Typographic Conventions
vii
To see the contents of the file my_next_bestselling_novel in your current
working directory, enter the cat my_next_bestselling_novel command at the
shell prompt and press Enter to execute the command.
The above includes a file name, a shell command and a key cap, all presented in Mono-spaced Bold
and all distinguishable thanks to context.
Key-combinations can be distinguished from key caps by the hyphen connecting each part of a key-
combination. For example:
Press Enter to execute the command.
Press Ctrl+Alt+F1 to switch to the first virtual terminal. Press Ctrl+Alt+F7 to
return to your X-Windows session.
The first sentence highlights the particular key cap to press. The second highlights two sets of three
key caps, each set pressed simultaneously.
If source code is discussed, class names, methods, functions, variable names and returned values
mentioned within a paragraph will be presented as above, in Mono-spaced Bold. For example:
File-related classes include filesystem for file systems, file for files, and dir for
directories. Each class has its own associated set of permissions.
Proportional Bold
This denotes words or phrases encountered on a system, including application names; dialogue
box text; labelled buttons; check-box and radio button labels; menu titles and sub-menu titles. For
example:
Choose System > Preferences > Mouse from the main menu bar to launch Mouse
Preferences. In the Buttons tab, click the Left-handed mouse check box and click
Close to switch the primary mouse button from the left to the right (making the mouse
suitable for use in the left hand).
To insert a special character into a gedit file, choose Applications > Accessories
> Character Map from the main menu bar. Next, choose Search > Find… from the
Character Map menu bar, type the name of the character in the Search field and
click Next. The character you sought will be highlighted in the Character Table.
Double-click this highlighted character to place it in the Text to copy field and then
click the Copy button. Now switch back to your document and choose Edit > Paste
from the gedit menu bar.
The above text includes application names; system-wide menu names and items; application-specific
menu names; and buttons and text found within a GUI interface, all presented in Proportional Bold and
all distinguishable by context.
Note the > shorthand used to indicate traversal through a menu and its sub-menus. This is to avoid
the difficult-to-follow 'Select Mouse from the Preferences sub-menu in the System menu of the main
menu bar' approach.
Mono-spaced Bold Italic or Proportional Bold Italic
Whether Mono-spaced Bold or Proportional Bold, the addition of Italics indicates replaceable or
variable text. Italics denotes text you do not input literally or displayed text that changes depending on
circumstance. For example:
Introduction
viii
To connect to a remote machine using ssh, type ssh username@domain.name at
a shell prompt. If the remote machine is example.com and your username on that
machine is john, type ssh [email protected].
The mount -o remount file-system command remounts the named file
system. For example, to remount the /home file system, the command is mount -o
remount /home.
To see the version of a currently installed package, use the rpm -q package
command. It will return a result as follows: package-version-release.
Note the words in bold italics above — username, domain.name, file-system, package, version and
release. Each word is a placeholder, either for text you enter when issuing a command or for text
displayed by the system.
Aside from standard usage for presenting the title of a work, italics denotes the first use of a new and
important term. For example:
When the Apache HTTP Server accepts requests, it dispatches child processes
or threads to handle them. This group of child processes or threads is known as
a server-pool. Under Apache HTTP Server 2.0, the responsibility for creating and
maintaining these server-pools has been abstracted to a group of modules called
Multi-Processing Modules (MPMs). Unlike other modules, only one module from the
MPM group can be loaded by the Apache HTTP Server.
6.2. Pull-quote Conventions
Two, commonly multi-line, data types are set off visually from the surrounding text.
Output sent to a terminal is set in Mono-spaced Roman and presented thus:
books Desktop documentation drafts mss photos stuff svn
books_tests Desktop1 downloads images notes scripts svgs
Source-code listings are also set in Mono-spaced Roman but are presented and highlighted as
follows:
package org.jboss.book.jca.ex1;
import javax.naming.InitialContext;
public class ExClient
{
public static void main(String args[])
throws Exception
{
InitialContext iniCtx = new InitialContext();
Object ref = iniCtx.lookup("EchoBean");
EchoHome home = (EchoHome) ref;
Echo echo = home.create();
Notes and Warnings
ix
System.out.println("Created Echo");
System.out.println("Echo.echo('Hello') = " + echo.echo("Hello"));
}
}
6.3. Notes and Warnings
Finally, we use three visual styles to draw attention to information that might otherwise be overlooked.
Note
A note is a tip or shortcut or alternative approach to the task at hand. Ignoring a note
should have no negative consequences, but you might miss out on a trick that makes your
life easier.
Important
Important boxes detail things that are easily missed: configuration changes that only
apply to the current session, or services that need restarting before an update will apply.
Ignoring Important boxes won't cause data loss but may cause irritation and frustration.
Warning
A Warning should not be ignored. Ignoring warnings will most likely cause data loss.
x
Other manuals for ENTERPRISE LINUX 5 - VIRTUAL SERVER...
11
Table of contents
Other Red Hat Software manuals
Red Hat
Red Hat ENTERPRISE 5.4 RELEASE NOTES User manual
Red Hat
Red Hat CERTIFICATE SYSTEM 7.2 - MIGRATION GUIDE Instruction Manual
Red Hat
Red Hat GLOBAL FILE SYSTEM 5.2 User manual
Red Hat
Red Hat ENTERPRISE 5.4 RELEASE NOTES User manual
Red Hat
Red Hat ENTERPRISE 5.4 RELEASE NOTES Instruction Manual
Red Hat
Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER... User manual
Red Hat
Red Hat ENTERPRISE LINUX 5.1 - LINUX ORACLE Quick start guide
Red Hat
Red Hat CERTIFICATE 7.2 RELEASE NOTES Instruction Manual
Red Hat
Red Hat NETWORK BASIC - USER REFERENCE GUIDE 3.2 Product information sheet
Red Hat
Red Hat NETWORK 2.7 - ENTERPRISE User manual
Red Hat
Red Hat NETWORK 3.5 - PROVISIONING User manual
Red Hat
Red Hat ENTERPRISE LINUX 5.3 - RELEASE MANIFEST Instruction Manual
Red Hat
Red Hat NETWORK - USER 1.3 Product information sheet
Red Hat
Red Hat CERTIFICATE SYSTEM 8 - AGENTS GUIDE Installation and operation manual
Red Hat
Red Hat ENTERPRISE LINUX 3 - FOR IBM S-390 AND IBM ESERVER... User manual
Red Hat
Red Hat NETWORK PROXY 5.3.0 - User manual
Red Hat
Red Hat ENTERPRISE LINUX 4 - DEVELOPER TOOLS GUIDE User manual
Red Hat
Red Hat NETWORK SATELLITE SERVER 4.0 User manual
Red Hat
Red Hat ENTERPRISE LINUX 5 - VIRTUAL SERVER... User manual
Red Hat
Red Hat ENTERPRISE LINUX 3 - FOR IBM ESERVER ISERIES AND IBM ESERVER... User manual
