Raidon InTANK iR2622S User manual
iR2622S
User Manual
InTANK
» InTANK iR2622S User Manual .................................................................1
1. Package Contents and Product Views ..............................1
2. Operating Information ......................................................3
3. Hardware Requirements and Precautions ........................3
4. Hardware Installation Procedure .......................................4
5. Computer Set Up...............................................................5
6. Hard Disk status on LCD screen .......................................6
7. Data Rebuilding Operation ................................................7
8. GUI Monitoring Software and Firmware Update ...............8
9. Frequently Asked Questions .............................................11
» InTANK iR2622S 產品使用說明............................................................ 12
1. 產品外觀及包裝內容 ..........................................................12
2. 環境需求 ............................................................................13
3. 硬體需求與注意事項 ..........................................................13
4. 硬體安裝 ............................................................................14
5. 電腦設定 ............................................................................15
6. 訊息顯示 ............................................................................16
7. 資料重建功能說明..............................................................17
8. GUI 功能說明與韌體更新...................................................18
9. 常見問題 ............................................................................21
iR2622S User Manual
V1.1
iR2622S User Manual
1
1. Package Contents and Product Views
Introduction
Thank you for purchasing RAIDON products. This manual will introduce the InTANK iR2622S Series.
Before using your InTANK iR2622S, please read this manual thoroughly. Although all information
contained in this user manual has been carefully verified before publishing, however, the actual
product specication will be based on the time of delivery from RAIDON. Any updates to the product
specications or relevant information may be found on www.raidon.com.tw. Products are subject to
change without prior notications.
If you have any questions regarding the products of RAIDON, or you would like to know the latest
product information, user manual update, or rmware update, please contact your local supplier or
visit www.raidon.com.tw for further information.
Copyright © RAIDON TECHNOLOGY, INC. All rights reserved.
Open the package and you should nd the following:
iR2622S
iR2622S x 1 ( with removable drive tray enclosed x 2)
SATA Cable x 1
Quick Installation Guide x 1
Screws and keys
» InTANK iR2622S User Manual
• Please check the product and accessories for any defect or missing parts. If you have any questions,
please contact your product supplier.
• Please visit the ofcial website (www.raidon.com.tw) to download drivers and other related resources.
iR2622S User Manual
2
Product View
LED Indicators :
1. LCD Display
2. LED of failure Alarm
3. Pri. HDD (HDD 1) status indicator
4. Sec. HDD (HDD 2) status indicator
5. Mute Button
6. Removable drive tray
7. HDD tray key lock
8. HDD Access
Status HDD 1 HDD 2 TRAY 1 TRAY 2 Fail LED Buzzer
HDD Idle
Orange
light always
on
N/A Blue light
always on
Red light
always on N/A N/A
Access
Orange
light always
on
N/A Purple light
ashing
Red light
always on N/A N/A
HDD 1 Failure N/A N/A Red light
always on
Red light
always on
Red light
always on on
HDD 2 Failure
Orange
light always
on
N/A Blue light
always on
Red light
always on
Red light
always on on
Backup
Orange
light always
on
N/A Blue light
always on
Red light
ashing N/A N/A
Fan Failure
Orange
light always
on
N/A Blue light
always on
Red light
always on
Red light
always on on
Overheat
(≥50°C)
Orange
light always
on
N/A Blue light
always on
Red light
always on
Red light
always on on
1. Fan
2. RS232 Port
3. SATA Port
4. 15 PIN Power Connector
5. 4Pin Power Connector
iR2622S User Manual
3
2. Operating Information
3. Hardware Requirements and Precautions
Operating Temperature : 0 ~ 40 " C (32 ~ 104 " F)
Storage Temperature : -10 ~ 70 " C (14 ~ 158 " F)
Line Voltage : 12V + 5V DC
1. Computers or servers must be with SATA I, SATA II, or SATA III.
2. Hard drive must be with SATA I, SATA II, or SATA III.
3. Once the drive mode conguration has been completed, re-conguration using the same hard
drives to set the drive mode will result in complete data loss. If you must change the drive mode,
make sure to backup all data prior to the mode change.
4. All existing data will be deleted when this product is set up for the rst time. Please ensure that all
data on the hard disk has been backed up before installation to avoid data loss.
5. Please make sure that the two hard drives are free from bad blocks or defects prior to installation
in order to avoid system crashes or data loss.
6. The usable storage capacity of the hard disk after formatting will be less than the capacity
indicated on the hard disk.
7. It is highly recommended for user to back up important data contained within the iR2622S unit on
a regular basis or whenever the user feels necessary to a remote or a separate storage device.
RAIDON will not be responsible for any lost of data caused during the use of the unit or the
recovery of the data lost.
iR2622S User Manual
4
※ Note :
1. RS232 Port and RS232 Cable: Provides hardware status monitoring to industrial control system or IPC via RS232.
2. We do not recommend users to disassemble the device without proper instructions and authorization. The manufacture warranty
will not cover the damages caused by unauthorized disassembling.
3. To prevent the device from malfunction, please make sure the device is connected with a direct and dedicated power connection of
a stable power input.
4. RS232 Port: For industrial control system or IPC to monitor the hardware status. More information, please contact your sales
SATA
SATA
SATA Cable
SATA Power Cable
Internal host shell schematic
1
2
iR2622S
iR2622S
4. Hardware Installation Procedure
Please follow the instructions below to complete the hardware installation.
Open the package and take out the product making sure that all the enclosed contents are
not damaged or missing. Should you nd damages or missing contents, please contact your
supplier immediately.
Place the system on a stable surface. Ensure that it is well ventilated without blockage to
the vent and kept away from areas near water and damage prone areas.
Please use the key included in the accessory to insert the HDD tray key lock and turn it 90
degrees to the left. After lightly pressing the HDD tray key lock, the removable drive tray will
pop open and extract the removable drive tray.
For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory
kit. For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the
accessory kit.
When the hard drive installation has been completed, insert the hard drive tray into the
system horizontally and secure the latch into place.
Use the preferred cable included to connect your computer to the relative interface
connection on the iR2622S unit.
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
iR2622S User Manual
5
5. Computer Set Up
When the hardware setup for iR2622S is complete, you are now ready to turn the machine on.
After the hardware installation is complete, the iR2622S will be treated as one single hard drive. Set
the hard drive to AUTO in the computer’s BIOS. When the computer is turned on, the system will
retrieve the following information:
1. In iR2622S, the installed hard drive can be detected by the Device Manager of Computer
Management for Windows.
2. Customers can choose to format the hard drive by using the Disk Management tool of the
operating system before using the iR2622S.
At this point, the installation process is completely nished. The user can freely retrieve and save
data to iR2622S just like retrieving and saving data to a regular hard drive. If the user experiences
any abnormality during the operation, please refer to the trouble shooting Q&A section in Appendix.
iR2622S User Manual
6
6. Hard Disk status on LCD screen
2. Fan Failure
3. Over Temperature (≥50°C)
Schedule Backup
Pri : O Sec : R
Schedule Backup
Pri : O Sec : R
Schedule Backup
Pri : M Sec : R
5. HDD2 is corrupted or not installed while HDD1 is still accessible.
4. HDD1 is corrupted while HDD2 still exists.
Schedule Backup
Pri : O Sec : M
1. Booting and Normal status.
RAIDON RAIDbox5
vxxxxxx.x
Schedule Backup
Pri : O Sec : R
F
T
iR2622S User Manual
7
With hard disk hot-swappable and scheduled backup functions.
Ofine backup. After the data is stored in the iR2622S, the user uses the secondary hard disk (HDD 2)
as a data backup disk to ensure the security of related data such as operating system les, encrypted
les, less accessed les, and even audio and video les. Users can put the hard disks back to the
iR2622S periodically to perform automatic data reconstruction to ensure that the system will not be
attacked by viruses or reduce the risk of simultaneous damage to two hard disks.
When one of the hard disks in the iR2622S is damaged, the system will send an alert through the
LCD screen and monitoring software. Users can take out the damaged hard disk without turning off
the machine while the system is still running.
When the iR2622S detects a hard drive missing or a hard drive failure, the Buzzer will start and the
LCD display screen will display the following messages:
After removing the failed hard drive and replacing with a new hard drive, if the hard drive is properly
installed, the LCD display screen will display the following messages:
When entering the scheduled backup time, the LCD screen will show the progress of data backup:
When the data backup is complete, the LCD screen will display the following message:
7. Data Rebuilding Operation
Schedule Backup
Pri : O Sec : R
Schedule Backup
Pri : M Sec : R
Schedule Backup
Pri : O Sec : M
Schedule Backup
Pri : Insert Sec : R
Schedule Backup
Pri →Sec 32%
Schedule Backup
Pri : O Sec : Insert
iR2622S User Manual
8
Users can download the GUI software from the website to monitor the status of the iR2622S.
※ The HDD1 equals to Pri HDD and HDD2 equals to Sec HDD.
1. System Status
This GUI will auto detects the connected iR2622S and reveals relative information accordingly.
8. GUI Monitoring Software and Firmware Update
2. Schedule Backup
You can schedule backups through this GUI. Click the backup cycle and click "Setting" to complete
the setting.
Table of contents
Other Raidon Storage manuals
Raidon
Raidon InTANK iR2775-S3 User manual
Raidon
Raidon InTANK iR2771-S3 User manual
Raidon
Raidon InTANK iR2024 User manual
Raidon
Raidon InTANK SR2611-2S-S2R+ User manual
Raidon
Raidon iR2774C-S3 User manual
Raidon
Raidon safetank GT2670-WB3 User manual
Raidon
Raidon SafeTANK GR5640-SB31+ User manual
Raidon
Raidon SafeTANK GR5640-SB3 User manual
Raidon
Raidon SafeTANK GT4670-TB3 User manual
Raidon
Raidon SafeTANK GR3660 Series User manual
Raidon
Raidon SafeTANK GT4670-SB3 User manual
Raidon
Raidon iR8023 User manual
Raidon
Raidon SafeTANK GR3630-SB3 User manual
Raidon
Raidon InTANK iR2771-S3 User manual
Raidon
Raidon GT8670-TB3 User manual
Raidon
Raidon SafeTANK GR5630-SB3+ User manual
Raidon
Raidon InTANK iR2623-S3 User manual
Raidon
Raidon SAFETANK GT4670-TB User manual
Raidon
Raidon InTANK IR8624-S3 User manual
Raidon
Raidon SafeTANK GT1670 Series User manual
