RADWAG PM C32 User guide

Start up Guide

• PM C32

Precision Balances

IMMB-09-01-09-20-EN

To view a complete User Manual go to the website or scan QR code:

radwag.com/en/manuals/3670

1. CONTENT

*The plug type may vary by country.

Models: PM C32 (max: 25-50 kg)

Models: PM C32 (max ≤ 15 kg)

Power adapter*

×1

Power adapter*

×1

Power adapter*

×1

Precision balance

×1

Precision balance

×1

Precision balance

with weighing pan

×1

Weighing pan

×1

Weighing pan

×1

2. UNPACKING

1 2 3

Models: PM (max: 10-50 kg)

Models: PM 60.1.C32 (max ≥ 60 kg)

3. RECOMMENDATIONS AND WARNINGS

Operate the device in a room where the temperature ranges between 10–40 °C

(50–104 °F) and where the relative humidity is below 80%. Temperature must

change slowly and gradually.

Using the anti-vibration table is recom-mended in order to enable the most stable

and repeatable measurement.

+10 oC

+50 oF

+104oF

+40 oC

Avoid air drafts and air movements

at the workstation.

Place the balance away from heat

sources. Avoid exposing the balance

to the sunlight.

Avoid exposing the balance to a mag-

netic ﬁeld. Do not weigh magnetic

substances.

Not intended for usage within EX

zones. Not intended for weighing

explosive or ﬂammable substances.

Make sure that the balance is placed

on an even surface.

Do not place the balance on an

unstable surface exposed to shocks

and vibrations.

1 2 3

Models: PM C32 (max ≥ 60 kg)

Keep the packaging should a warranty

claim or service be required.

4. ACTIVITIES TO BE DONE PRIOR TO OPERATION

4.2. Grounding spring check

Check whether the grounding

spring takes its intended

location.

Make sure that the grounding

spring juts slightly out of the

hole.

Grounding

foot

Models: PM C32 (max = 60 kg only)

Models: PM C32 (max: 10 - 50 kg only)

4.1. Remove transport lock

5. COMPONENTS ASSEMBLY

Models: PM C32 (max ≤ 15 kg)

1 2

6. PREPARING FOR WORK

6.1. Temperature stabilization

Place the device at the workstation, wait until

it reaches room temperature.

Prior to switching the device on,

let it reach room temperature

(estimated stabilisation time: 1-8 hours).

Connect the power adapter

to DC connector.

Connect the power

adapter to the mains.

1 2 3

up to 1- 8 h

Models: PM C32 (max: 25-50 kg)

Models: PM C32 (max = 60 kg)

6.2. Balance levelling

Your balance is ready to use!

To switch the device on, press ON / OFF key.

6.3. Switching the balance on

Models: PM C32 (max: 10 - 50 kg)

Models: PM C32 (max = 60 kg)

To level the balance, turn its

feet and keep turning the feet

until an air bubble takes the

central position.

To level the balance, turn its

feet and keep turning the feet

until an air bubble takes the

central position.

7. PANEL AND SCREEN

7.1. Panel keys

7.2. Home screen

Proximity sensor

Switching on / oﬀ

Main menu

Cancel

Text / Numeric

keyboard mode

Back / delete

Zeroing

Taring

Weighing unit

Conﬁrm

Working mode

ENTER / PRINT

Text / Numeric keyboard

with navigation keys

Proximity sensor

Editable quick

access toolbar

Conﬁgurable additional

information ﬁeld

Weighing result

window

Status bar

Working mode Communication status

Adjustment Print footerPrint header Select product Databases

Press the key under the icon to start

the adjustment.

Wait for the adjustment completion.

8. BASIC OPERATIONS

8.1. Adjustment

1 2

8.3. Taring

8.2. Zeroing

With loaded weighing pan: upon stabilization

of the weighing result, press key.

Make sure that the weighing pan is empty

and press key.

The balance has been tared.

The balance has been zeroed.

0.68

0.21

0.21 0.21

9. SETTINGS

9.1. Administrator’s logging in

1 2

Some balance settings are accessible for Administrator exclusively.

Prior balance parameters setup, log in as the Administrator.

Press key To enter ‘’User’’ menu.

Users list is displayed. Using keys, select

“Admin” option and press key to conﬁrm.

Log out

Admin

Operators

Admin

8.4. Working modes selection

8.5. Units selection

Weighing

Dosing

Checkweighing

Formulations

Percent weighing

Statistics

Parts counting

Animal weighing

Solids density

Liquids density

Peak hold

•Gram [g]

•Miligram [mg]

•Carat [c]

•Pound [lb]

•Ounce [oz]

•Troy ounce [ozt]

•Pennyweight [dwt]

•Hong Kong Tael [tlh]

•Singapore tael [tls]

•Taiwanese tael [tlt]

•Chinese tael [tlc]

•Momme [m]

•Grain [gr]

•Tical [ti]

•Newton [N]

•Baht [baht]

•Tola [tola]

•Mesghal [msg]

•User unit 1

•User unit 2

Using key enter working modes menu. Using keys select working

mode and press key to conﬁrm.

Press the key to change the weight unit.

The balance enables selecting the

following weighing units:

Other manuals for PM C32

Table of contents

Popular Scale manuals by other brands

AWS

AWS ZEO-50 user manual

Gima

Gima Glass Body Fat Analyzer Use and maintenance book

Seca

Seca 374 user manual

TEC

TEC TEC SL59 SERIES owner's manual

Axis

Axis B/E Series user manual

Alecto

Alecto ACW-40 user manual

Rice Lake

Rice Lake MSI-4260 IS Technical manual

IKA

IKA RCT basic safety control operating instructions

ADE

ADE M20011 operating manual

Duronic

Duronic KS3000 manual

Digi

Digi SM-720 Service manual

Cardinal

Cardinal CS Series Operation manual

Korona

Korona Kastella Instructions for use

A&D

A&D FC-50Ki instruction manual

BDA

BDA CAMARGUE installation guide

Tanita

Tanita HD-357 Instructions for use

Leifheit

Leifheit 03173 quick start guide

Lumme

Lumme LU-1340 user manual