Queclink GL300M Series User manual

GL300M Series Quick Start V1.00

Page 1: Basic Operaon

Find “Queclink GL300M Series_Manage_Tool_

V1.0.exe” in developer suite and run it to congure

the running parameters of GL300M Series.

Beer place the GL300M Series under the open

sky and let the surface with LED indicators face the

sky.

Turn On GL300M Series Connect GL300M Series to your computer with USB

Data_Cable_M.

Check The Appearance

Check Parts List

To mini USB To computer

GPS Antenna

The USB Data_Cable_M is

not in the delivery list. Please

contact your vendor for it.

Find“Queclink_WCDMA_USBDriver_V1.

00.rar”, and choose the suitable driver

for your computer system. If you have

already installed it, please go to Step 6.

Before using GL300M Series for the rst

me, please fully charge the baery.

Please refer to

Page 2 for details.

Power Key

Check The Appearance

Please refer to Page 2 for details.

Queclink

Confidential

Page 2: PC Manager Tool Quick Start

Aer these steps, GL300M Series will have some

basic tracking funcons such as xed me report

and Geo-Fence. For other advanced funcons of

GL300M, please refer to “GL300M Series @Track

Air Interface Protocol” or visit our website.

hp://www.queclink.com

[email protected]

Run the Manager Tool. Select correct COM port and

input default password “gl300m”. Then press OK.

If you want to test the GL300M Series via SMS, set “Report

Mode” to “Force on SMS” and input the phone number to

receive the SMS from GL300M Series. Aer that, go to Step

6. Otherwise, please go to Step 3.

Set “Report Mode” to “TCP Short Connecon”. Input the IP

address and port number of the backend server. Please make

sure the IP address can be accessed over the internet and the

data sent to this address can be received.

Please contact your SIM card provider to get the user

informaon for UMTS. Input it in GTBSI seng.

Press “Send” buon and update the parameters of

GL300M Series. Then the GL300M Series can report

informaon to your backend server or SMS receiver.

Note: These commands can also be sent to GL300M

Series via SMS.

Command has been accepted when you see the window

shown below.

Set the parameters of xed me report so that the GL300M

Series will report its posion to backend server periodically.

Press “Send” buon to update the parameters.

Following screenshot shows how to congure the GL300M Series

to report its posion every 3 minutes.

The following screenshot shows how to create a Geo-

Fence. Press “Send” buon to update the parameters.

Queclink

Confidential

Other manuals for GL300M Series

1

Other Queclink GPS manuals

Popular GPS manuals by other brands

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Operating instruction

Garmin

Garmin SOUNDER 125 Owner's manual & reference

Garmin

Garmin DEZL 580 owner's manual

Jigabot

Jigabot EX quick start guide

Pointer

Pointer Cellocator CelloTrack XT LTE overview

Voxson

Voxson Voxtrack GPS500 Quick user guide

Garmin

Garmin ECHOMAP PLUS owner's manual

Starcom Systems

Starcom Systems Kylos Compact user guide

Garmin

Garmin 15 H Series Technical specifications

Cobra

Cobra Marine MC 600Ci owner's manual

Cellocator

Cellocator CelloTrack T installation guide

Enfora

Enfora Mini-MT GSM2228UG001 user guide

Magellan

Magellan eXplorist 100 Reference manual

LTE

LTE G50B user manual

Garmin

Garmin DEZL OTR500 owner's manual

SkyGolf

SkyGolf SkyCaddie SG1 user guide

Garmin

Garmin GPSMAP 78 series owner's manual