Qlight S100E User manual

S100E / S100E-FT / S125E / S125E-FT

Thank you for purchasing Q.Light product.

Please read this manual carefully before installing this system

for safe and long use of the product.

▪ Low priced economical product with high efficiency in radiating

signal light.

▪ Volume(Buzzer Built-in Type) : 85dB(1m)

▪ RPM : 120-140/Min.(Controllable)

▪ Material : Lens-AS, Body-ABS, Reflector-Heat Resisting ABS

▪ Protection Class : IP23

S100E / S100E-FT

▪ General Specification

Model Rated

Voltage Current Bulb Weight Color

DC12V 0.720A 12V10W T16x35 15S

DC24V 0.390A 24V10W T16x35 15S

0.35Kg

AC110V 0.087A 12V10W T16x35 15S

S100E

-FT

AC220V 0.045A 12V10W T16x35 15S

0.63Kg

Red-R

Amber-A

Green-G

Blue-B

▪ External View Drawing

S100E S100E-FT

S125E/ S125E-FT

▪ General Specification

Model Rated

Voltage Current Bulb Weight Color

DC12V 0.720A 12V10W T16x35 15S

DC24V 0.390A 24V10W T16x35 15S

0.42Kg

AC110V 0.087A 12V10W T16x35 15S

S125E

-FT

AC220V 0.045A 12V10W T16x35 15S

0.68Kg

Red-R

Amber-A

Green-G

Blue-B

▪ External View Drawing

S125E S125E-FT

Power line UL1015-NO.16(1.25sq) x 2C 400mm comes out from

the product.

▪ In case of product using AC voltage, connect the line without

polarity(wire color).

▪ In case of product using DC voltage, black line is negative(-).

Indoor Outdoor

▪ This product was manufactured with the structure for indoor use.

Installing in any direction is okay for indoor use.

▪ Outdoor use is limited at a place where no water or very little

water percolates. Mouning also should be done only with vertical

standing shape.

▪ Mount at the place where exists low vibration, low impact, low

moisture and low dust as long as possible.

▪ Refer to following information and drill necessary mounting holes

on proper part of the product.

(Make sure PCD from external view drawing.)

OPERATING MANUAL

Bulb Revolving Warning Light

▪ S100E/S125E Type : Fix the product by using nuts(100E:M4-3EA,

125E:M5-3EA) originally equipped on mounting bolt on bottom

of the product.

▪ S100E-FT/S125E-FT Type : Fix the product by using nuts(M6-

2EA) originally equipped on mounting bolt on bottom of the

product.

This product has a volume on assembling board for controlling

revolving speed. Refer to following drawing and explanation for

right operating.

2) Lens Removal

Remove lens by turning it counterclockwise and make sure

bulb and bulb socket on assembling board.

2) Revolving Speed Control

▪ The volume for revolving speed control(1) is built-in this

product. Turn it clockwise for increasing revolving speed and

turn it counterclockwise for decreasing revolving speed.

▪ Treating with strong power can break the volume.

Please be careful.

3) Bulb Change

※ Warning ! Turn off Power

Must turn off power supply and change the bulb after at least

1 minute.

▪ Make sure the rated voltage and wattage of new bulb. If the

voltage of new bulb is higher than that of original bulb, the

self-life of product can be reduced and can cause damage on

lens and reflector. Therefore,please use same bulb as original

one which has same rated voltage and wattage or lower one.

▪ Bulb Removal : Press slightly the bulb downward and turn it

counterclockwise for removing.

▪ Bulb Fitting : Fit new bulb into the socket by pressing it

clockwise.

▪ If using voltage is seriously higher or lower than rated voltage, it

can reduce the self-life of the product or can cause a problem

on product operating. Make sure the using voltage does not

exceed +/- 5% of the rated voltage.

▪ If lens or body of the product is contaminated by chemicals such

as thinner,benzene, the product can be damaged, discolored

or deformed. Please be careful.

▪ Do not give strong impact to the product. It can be a reason of

wire disconnection or short circuit.

▪ Do not strongly pull the wire out from the product. It can cause a

disorder.

Bulb Removing Bulb Fitting

(S100E)

(S125E)

(S100E-FT)

(S150E-FT)

Situation Main Cause Solution

Non Lighting Wire Disconnection

with Bulb

Wire Re-connection or

Bulb Change

Short Self-Life of Bulb Supplying Voltage Higher

than Rated Voltage

Making Sure Using

Voltage

Lens Deformation Caused

by Bulb Overheating

(AC Type)

The Voltage of Bulb

is Higher than Rated

Voltage

Changing Bulb with

Rated Voltage

Non Revolving Problem with Motor Contact Q.Light or

Their Agent

Wrong Wiring Making Sure Wiring

Neither Lighting Nor

Revolving No Power Supply Making Sure Power

Supply

Low Revolving Speed Wrong Operating Revolving

Speed Control Volume

Turn the Volume

Clockwise

Q-LIGHT CO., LTD.

http://www.qlightkr.com

E-mail : [email protected]

Seoul Office (Domestic Sales & A/S)

Tel) 02-2679-6152

Ansung BD A-312, 410-13 Sindorim-Dong, Guro-Gu, Seoul

Overseas Marketing Team / Plant

Tel) 055-328-4082 Fax) 055-328-4083

Plant #1 : 178-1 Woogye-Ri, Sangdong-Myun, Kimhae-Si,

KyungNam, Korea

Plant #2 : 417-1 Geumsa-Dong, Geumjung-Gu, Busan

This manual suits for next models

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions