Qeedji DMB400 User manual
User manual
DMB400
4.14.14 002D
2
Legal notice
DMB400 4.14.14 (002D_en)
© 2022 Qeedji
Rights and Responsibilities
All rights reserved. No part of this manual may be reproduced in any form or by any means whatsoever. or by any means whatsoever without the
written permission of the publisher. The products and services mentioned herein may be trademarks and/or service marks of the publisher. or
trademarks of their respective owners. The publisher and the author do not claim any rights to these Marks.
Although every precaution has been taken in the preparation of this document, the publisher and the author assume no liability for errors or
omissions, or for damages resulting from the use of the information contained in this document or the use of programs and source code that can go
with it. Under no circumstances can the publisher and the author be held responsible for any loss of profits or any other commercial prejudice caused
or alleged to have been caused directly or indirectly by this document.
Product information
Product design and specifications are subject to change at any time and `Qeedji` reserves the right to modify them without notice. This includes the
hardware, the embedded software and this manual, which should be considered as a general guide to the product. The accessories supplied with the
product may differ slightly from those described in this manual, depending on the developments of the various suppliers.
Precautions for use
Please read and heed the following warnings before turning on the power: - installation and maintenance must be carried out by professionals. - do
not use the device near water. - do not place anything on top of the device, including liquids (beverages) or flammable materials (fabrics, paper). - do
not expose the device to direct sunlight, near a heat source, or in a place susceptible to dust, vibration or shock.
Warranty clauses
The `Qeedji` device is guaranteed against material and manufacturing defects for a certain duration. Check the device warranty duration value at the
end of the document. These warranty conditions do not apply if the failure is the result of improper use of the device, inappropriate maintenance,
unauthorized modification, operation in an unspecified environment (see operating precautions at the beginning of the manual) or if the device has
been damaged by shock or fall, incorrect operation, improper connection, lightning, insufficient protection against heat, humidity or frost.
WEEE Directive
This symbol means that your appliance at the end of its service life must not be disposed of with household waste, but must be taken to a collection
point for waste electrical and electronic equipment or returned to your dealer. Your action will protect the environment. In this context, a collection
and recycling system has been set up by the European Union.
3
1.1
1.2
1.2.1
1.2.2
1.2.3
1.2.4
1.2.5
1.3
1.4
2.1
3.1
3.1.1
3.1.2
3.1.3
3.1.4
3.1.5
3.1.6
3.1.7
3.1.8
3.1.9
3.1.10
3.1.11
3.1.12
3.1.13
3.1.14
3.1.15
3.1.16
3.1.17
3.1.18
3.1.19
3.1.20
4.1
5.1
5.2
6.1
7.1
7.2
7.3
7.4
7.5
Table of contents
Part I : Description and installation
Introduction
Getting started
Device fixture
Device dimensions
Labelling
Device start-up steps
Test card
LEDs behaviour
Connectors pin-out
Part II : Applicative user interface
Applicative user interface
Part III : Administration console user interface
device configuration Web user interface
Configuration > Administrator
Configuration > LAN
Configuration > WLAN
Configuration > Output
Configuration > App
Configuration > Servers
Configuration > License
Configuration > Date and time
Configuration > Regionality
Configuration > Tasks
Configuration > Variables
Configuration > AV commands
Maintenance > Test card
Maintenance > Middleware
Maintenance > Logs
Maintenance > Preferences
Maintenance > Tools
Information > Device
Information > Network
Information > Screens
Part IV : Configuration by script
Configuration by script
Part V : Technical information
Technical specifications
Conformities
Part VI : Contacts
Contacts
Part VII : Appendix
Appendix: Device status (status.xml)
Appendix: Qeedji PowerPoint publisher for Media Players
Appendix: playfolder with services account
Appendix: scrolling text overlay
Appendix: video-input playback inside a MS-PowerPoint slide thanks to the MS-PowerPoint Cameo object insertion
4
Part I Description and installation
5
1.1 Introduction
This manual explains how to install and configure your DMB400 device.
Recommendations and warnings
This device is designed to be used indoor.
This device is intended to work with the power supply unit. This power supply unit must be connected to a mains socket conforming to standard NF C
15-100. If the AC power cable is damaged, it must be replaced. It is possible to order a power supply unit replacement by sending a request to the
This device is a Class A device. In a residential environment, this device may cause radio interference. In this case, the user is asked to take
appropriate measures.
Content of the package
Items Description Quantity
Device DMB400 device with Gekkota embedded. 1
Power supply unit 12 V power supply unit with cable of 1.2 m. 1
Labels One on the cardboard packaging and another one at the back of the product.
Additional label can be present in case build-in options. 2
WLAN antennas To be screwed on the dedicated WLAN locations.
Provided with the device when it is supporting the WLAN option. 2
☛ In this documentation, the unit of measurement for dimensions is done in millimeters followed by its equivalent value in inches.
6
1.2 Getting started
Device front face
1 Antennas locations,
2 Power supply connector,
3 Audio connector,
4 USB2 3.0 connector,
5 RS232 DTE connector,
6 HDMI output connector.
Device front face with the WLAN option
1 Location of the 2 WLAN antennas to screw.
Device rear face
7 Antenna location,
8 Power supply red LED,
9 Status green LED,
10 LAN RJ45 connector,
11 GPIO/Infrared connector,
12 HDMI input connector,
13 USB1 2.0 connector.
1
2
3
4
5
6
1
1
1
7
8
9
10
11
12
13
7
7
1.2.1 Device fixture
8
1.2.2 Device dimensions
9
1.2.3 Labelling
Product label
The model of the device, the power supply characteristics, the serial number (PSN) and the MAC address are written on a label stuck on the case.
Packingbox label
This is the label stuck also on the packingbox. It is showing information on:
the device model,
the serial number (PSN).
Some additional labels may be present in case of built-in options.
☛ The serial number of the device could be requested in case of technical support.
10
1.2.4 Device start-up steps
Step 1 (T0 = 0 s)
Device start-up initialisation
Step 2 (T ~ 23 s)
Device start-up finalisation
This phase duration is depending on
some variable values (like NTP),
some network access duration or
some data checking (check-disk)
Step 3 (T ~ 44 s)
Nominal mode
During this step, the device has to
play the App content.
* After the middleware upgrade
occurred, in case valid DNS &
deactivated NTP server, it takes ~
2 min 50 s.
Other manuals for DMB400
3
This manual suits for next models
1
Table of contents
Other Qeedji Media Player manuals
