Qazqa 45827 User manual

INSTALLATION INSTRUCTIONS

Please read these instructions carefully before attempting to install this

product. It is advisable to keep these instructions in a safe place for future reference.

This product must be installed in accordance with current IEE Wiring regulations and

building regulations by a qualified electrician.

PARAMETER:

IP Rating IP44

Rated Voltage AC 220-240V, 50Hz

Rated Wattage Max.60W

Protection Class Class I

Lampholder E27

Electrical Installation

Always switch off the electricity supply at the mains during installation and maintenance. We

recommend that the fuse is withdrawn or circuit breaker switched off at the distribution board whilst

work is in progress (turning off the light switch is not sufficient).

1. Unscrew the screws and release the fitting from its wall bracket.

2. Use the wall bracket as a template to mark the position of the drill holes. Drill with a suitable drill

bit and plug the mounting holes with suitable plastic wall plugs. Take care not to foul any mains

cables or pipes below the surface while drilling.

3. Use a sharp object to pierce the rubber grommet in the wall bracket.

4. Feed the incoming mains cable through the rubber grommet in the wall bracket and attach the

wall bracket to the wall with suitable wall screws.

5. Use the heat sleeve provided to cover all incoming cables separately from the rubber grommet

to the terminal connection.

6. Connect the Brown (live) and Blue (neutral) cables directly to the lampholder and the

yellow-green (earth) cable to the earth screw. Ensure that the live cable (Brown) is

connected to the centre pin (“L” Marked”) of the lampholder. Ensure that all incoming Earth

leads are connected to the terminal marked with the earth symbol . This is to preserve earth

continuity throughout your property. Ensure that there are no loose strands of conductor wire

exposed outside the terminals.

7. Fit the recommended light bulb type.

8. Replace the cover and shade.

9. Restore mains supply and switch on.

Bulb Replacement

1. Switch off product and allow to cool.

2. Remove the cover and shade by loosening the screws.

3. Obtain new bulb.

4. Insert the bulb in lampholder.

5. Replace the cover and shade.

6. Restore mains supply and switch on.

45827

Table of contents

Other Qazqa Outdoor Light manuals

Qazqa

Qazqa NAUTICA WL 2 User manual

Qazqa

Qazqa Charlois WL Black Lux User manual

Qazqa

Qazqa Terry GS User manual

Qazqa

Qazqa Empoli FL Bronze CCT 2 User manual

Qazqa

Qazqa Brescia Combi WL User manual

Qazqa

Qazqa Charlotte 104418 User manual

Qazqa

Qazqa Margarita FL 23 Black User manual

Qazqa

Qazqa New York WL Dark Grey User manual

Qazqa

Qazqa Noud FL 105052 User manual

Qazqa

Qazqa NAUTICA WL 1 User manual

Qazqa

Qazqa Eva FL 1 Bronze User manual

Qazqa

Qazqa NAUTICA WL ROUND BRASS User manual

Qazqa

Qazqa JeIena FL 2 User manual

Qazqa

Qazqa Zaandam FL User manual

Qazqa

Qazqa Empoli FL Brass CCT 2 User manual

Qazqa

Qazqa Stylish FL Satin 92023 User manual

Qazqa

Qazqa Elif FL 1 Black Gold User manual

Qazqa

Qazqa Antigua P220 Bronze User manual

Qazqa

Qazqa Shade 33 Globe White User manual

Qazqa

Qazqa Simon WL 2 PIR User manual

Qazqa

Qazqa Margarita FL 36 Black User manual

Qazqa

Qazqa Charlois WL Black User manual

Qazqa

Qazqa Parte FL Black User manual

Qazqa

Qazqa Odense P50 Black User manual

Popular Outdoor Light manuals by other brands

Sealey

Sealey LED37 instructions

nordlux

nordlux VEJERS Mounting instruction

SImx

SImx ELITE LED LHTC637 installation instructions

GEV

GEV CAROLINE 10833 manual

NEBO

NEBO NEB-LSP-0020 Use and care guide

WE-EF

WE-EF PFL540 LED Installation and maintenance instructions

Lindby

Lindby 9949029 Intended use

HEPER

HEPER DOGO Side LW6048.585-US Installation & maintenance instructions

HEPER

HEPER LW8034.003-US Installation & maintenance instructions

Maretti

Maretti VIBE S 14.6080.04.A quick start guide

BEGA

BEGA 84 253 Installation and technical information

HEPER

HEPER MINIMO Installation & maintenance instructions

LIGMAN

LIGMAN BAMBOO 3 installation manual

Maretti

Maretti TUBE CUBE WALL 14.4998.04 quick start guide

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB installation instructions

urban ambiance

urban ambiance UQL1273 installation instructions

TotalPond

TotalPond 52238 instruction manual

Donner & Blitzen

Donner & Blitzen 0-02661479-2 owner's manual