Pyle view PLRDVD10 User manual
10.4" TFT-LCD Flip-Down Monitor
with Built-in DVD Player
PLRDVD10
1
Operation Manual
Table of Contents
Welcome! ------------------------------------------------------------------------------------------------------- 2
Precautions --------------------------------------------------------------------------------------------------------3
Installation
Where to Install -------------------------------------------------------------------------------------------------- 4
Installation -------------------------------------------------------------------------------------------------------- 5
Setting Up Dome Lamps ---------------------------------------------------------------------------------------- 6
Operation
Monitor Section -------------------------------------------------------------------------------------------------- 7
OSD menu --------------------------------------------------------------------------------------------------------- 8
DVD Section ------------------------------------------------------------------------------------------------------ 9
Remote Control --------------------------------------------------------------------------------------------------10
Connections
Connection Diagram -------------------------------------------------------------------------------------------- 12
Additional Information
Troubleshooting --------------------------------------------------------------------------------------------------13
Specifications ---------------------------------------------------------------------------------------------------- 14
10.4” TFT-LCD Flip-Down Monitor
with Built-in DVD Player
PLRDVD10
2
Welcome!
Thank you for purchasing the 10.4” flip-down TFT-LCD Monitor with DVD Player. For
Maximum enjoyment and prolonged life of the DVD player, we strongly recommend
that you read the instruction manual carefully before attempting to operate the unit.
Please store this manual in a safe place for future reference.
Digital Video Discs is the best source of movies for your life. The latest digital
technology allows compression of an entire movie onto one disc. Provide greater picture
clarity and sound fidelity of any video player on the market.
You can select PAL or NTSC color system.
In addition to normal screen mode, full screen and zoom screen modes are also
available.
The low reflection liquid crystal panel reduces the glare from outside lighting
sources.
You can manually adjust the brightness of the display according to the prevailing
light conditions of the surroundings.
The backlighting control produces sharp contrast images free from reversed or
blurred colors.
This unit has 1 Audio/Video input, 1 Audio/Video output, for connection additional
monitor and IR transmitter of IR wireless headphone.
You can use wired headphones and infrared wireless headphones with this unit.
3
Precautions
To avoid the risk of serious injury or accident, read the following precautions before
installing and operation the unit.
On Safety
Comply with your local traffic rules and regulation.
While driving
The driver must not watch or operate the monitor. It may lead to distraction and
cause an accident.
The driver must not use the headphones. It may lead to distraction and cause
an accident.
Park the car in a safe place when the driver watch and operate the monitor, or use
headphones.
When operating
Do not hang onto the monitor.
Do not insert your hands, fingers or foreign objects into the unit while the
monitor is functioning. It may cause injury or damage to the unit.
Take care not to bump your head against the unit when getting up from the
back seat.
Keep small articles out of the reach of children.
On Installation
Installing this unit requires technical expertise. This unit should be installed by
qualified technician or service personnel.
If you try to install this unit by yourself, do it properly, referring to the installation
and wiring diagrams in this operation manual. Improper installation may result in a
fire or an electric shock.
Before installation, be sure to turn the ignition switch to the OFF position or take
the key out. Installing this unit with the ignition on may cause battery drain or a
short circuit.
Do not damage any pipes, tubes, the fuel tank or electric wiring when installing this
unit. This can cause a fire. If you drill a hole in car panels, make sure that any
hidden car parts will not be damaged.
Do not use any nuts or bolts for safety devices such as steering linkage, fuel supply
or braking systems. This can cause a fire or an accident.
4
Where to Install
Before installing this unit, please check your local traffic rules and regulations. Follow
the diagram below to install this unit in a suitable position in your car.
Do not install this unit where:
It will obstruct the driver’s view when the monitor is in either the open or closed
position.
It will obstruct the operation of the airbag system.
It will obstruct the operation of the vehicle, especially the steering wheel, shift lever,
or brake pedal.
A driver or passengers may injure themselves when getting into or out of the car.
5
Installation
Roof-mount Installation/Installation on ceiling
Securlock
Press the RELEASE BUTTON
to open the Displa
y
Monitor
6
Setting Up Dome Lamps
*Operating the dome
There are there function buttons for the Dome lamps operation: OFF, DOOR, and
ON. (Refer to the following figure)
A. OFF: To turn off the lamps.
B. DOOR: To make the lamps turned on only when car doors are opened.
C. ON: To turn on the lamps.
*The electric circuit figure
Point Power Cord Color Connection
R Red Connecting with Power Supply
W White Connecting with Sensor of Car Doors
B Black For Ground Connection
Remarks:
1. There is no wiring connection necessary at “ B “ point as “ B “ has been
connected when the metal bracket is screwed in.
2. Only use 12 Volt DC power.
7
MONITOR SECTION
123456
Remote
Control
Holder
①IRSensor
②Power
③OSD
④UP
⑤Down
⑥Mute
8
* OSD MENUS IN A/V SOURCE
*Quick Adjustment OSD Menus
1. press “ MENU” button, to open the MAIN MENU, using
“ + “ or “ - “ buttons to select OSD functions.
2. In order to select desire options, it is necessary to press ”MENU”
Again to enter each mode, then use” + / - “ to increase or decrease
Parameters as well.
3. Press “ + “ or “ - “ button directly to adjust speaker volume
3. Selecting “ EXIT” mode will store your selected parameter and leave OSD
Menus.
9
DVD SECTION
To operate DVD by pressing the buttons on front panel:
①Eject: Ejecting a Disc, Press (EJECT) button to eject the disc
②Stop: Stopping Play, Press the (STOP) button to stop the unit playback, when you
press the (PLAY) button it will continuous normal playback. Press the (STOP)
button twice, it will stop the playback and go back to initial Track/Chapter.
③Play/Pause: Press once to pause a play, press again to resume or continuous
playback.
④Power: Press the (POWER) Button, Insert the disc with printed side facing up into
the disc slot, The player starts playback automatically.
⑤Reverse: Press (REW) to reverse rapidly.
⑥Forward: Press (FF) to forward rapidly.
Table of contents
Other Pyle view Car Video System manuals
Pyle view
Pyle view PYLE PLVWR910R User manual
Pyle view
Pyle view PLDNV695B User manual
Pyle view
Pyle view PLRD195IF User manual
Pyle view
Pyle view pld11bt User manual
Pyle view
Pyle view PLVWR1544 User manual
Pyle view
Pyle view PLDF23 User manual
Pyle view
Pyle view PLVWR1050 User manual
Pyle view
Pyle view PLVWR950T User manual
Pyle view
Pyle view PLD10BT User manual
Pyle view
Pyle view PLRD1531F User manual
Pyle view
Pyle view VIEW PLVW1045R User manual
Pyle view
Pyle view PLBT72G User manual
Pyle view
Pyle view PL90HRBK User manual
Pyle view
Pyle view PLVWR1755 User manual
Pyle view
Pyle view PLRD94 User manual
Pyle view
Pyle view LCD Monitor PL71PHB User manual
Pyle view
Pyle view PLRD104 User manual
Pyle view
Pyle view PLVWR2200 User manual
Pyle view
Pyle view PLVW20T User manual
Pyle view
Pyle view 19 inch Roof Mount TFT LCD Monitor PLVWR1982 User manual
