Puloon Eagle Eye 7 User manual
Eagle Eye 7
- User Manual
REV. : 0.14
DATE : 2019.02.12
-1-
Contents
Safety Instructions
General Instructions 3
Operation Environment 4
Banknotes To be Avoided 5
Caution for Operators 6
Function & Setting
Function 19
Display 24
Setting 31
Operation
Summary of Operation 14
Currency Selection 15
Reject Reason 16
Add Up 17
Details 18
Installation Guide
Installation 7
Overview 8
-2-
Error & Trouble Shooting
When Errors Occur 56
Error Code List 57
Appendix A
Product Specification 60
Products Contents 61
Daily Maintenance
Maintenance 46
Guidelines for major components 47
Installation of Hopper Guide 52
Count Mode
Count Mode 37
Appendix B
Count Mode for AT type 62
-3-
Safety Instructions
General Instructions
Do not place the product near heat sources such as a stove or a heater.
Do not use gas sprays and etc. which may easily catch fire, for cleaning.
Do not try to disassemble or repair the product if you are not trained and
authorized. Such an unauthorized activity may cause accident or critical
damage to the product and it would not be covered with the warranty.
Do not place heavy objects or liquid containers, such as a beverage can,
on the product.
Do not apply shock on the product.
Do not use the product at the place where water may spill on it.
Do not apply excessive force to the product.
Do not try to open or operate the product by force.
Make sure to apply proper grounding through the plug. Short-circuit may
cause sudden electrical shock.
Before maintenance or repairing activity, make sure to turn its power off
and then start to replace with a fuse or to check the components.
Do not touch the product, and power supply plug and cord with a wet
hand.
Do not pull out the power cord when unplugging. Such action may cause
electric shock or fire.
Outlet must be located near the product and should be easily accessible.
-4-
Operation Environment
Safety Instructions
Do not expose the product to the direct sunlight for normal operation
and life cycle.
Avoid dusty location and place the product on the stable and non-
vibrating desk.
Keep and use the product under the optimal conditions as follows:
-Temperature: 5℃~45℃(41F~113F)
-Humidity: 0%~85%(no condensation)
Do not press the LCD screen or control keys with sharp objects such as a
pen or a pin.
In case of safekeeping for long period, put the cover on the product.
-5-
Banknotes to be avoided
Do not count the following banknotes as it may cause jam or error.
1) Banknotes with a hole or tear
2) Folded or crumpled banknotes
3) Wet banknotes
4) Worn banknotes
5) Banknotes polluted with foreign substance or oil
Damaged Banknotes
Curled Banknotes
Folded or Partial Banknotes
Safety Instructions
-6-
Caution for Operators
During operation, never put anything like clips or any other stuff except
banknotes on the hopper. Surely be careful that the operator’s hair, clothes
or necktie would not be picked and absorbed into machine.
Straighten the folds or corners of banknotes before placing on the hopper.
Banknotes should be properly arranged and then put on the hopper as
shown below for efficient operation.
Safety Instructions
-7-
Installation Guide
Installation Space
For proper installation, contact to the designated sales agent near the location
of installation.
· The product is allowed only for indoor use. Do not install outdoors.
· The product should be installed in the stable place enough to endure the
weight and operation. Avoid unstable, slanting or uneven position.
· After installation, daily maintenance and cleaning is strongly recommended
for normal and reliable operation.
The product should be installed at the proper place having enough space for
loading notes and simple maintenance activities.
Installation
Unit : mm
-8-
Name of Each Part (Front View)
1 Hopper
2 Display Panel
3 Stacker
4 Hopper guide
5 Pickup Roller
6 Operation buttons
7 Reject Pocket
Space for Loading Notes
Direct U/I by Full Color Touch Screen
Space for Counted Notes
Adjustable Guides to Note Size
Pick-up Roller to Feed Notes for Counting
Start/Stop Keys for Operation
Space for Rejected Notes
Overview
Installation Guide
-9-
1 Feed GapAdjustment
2 Dust Pocket
3 Hopper Guide
4 Upper Cover Lever
5 Lower Cover Lever
6 Power Switch
7 I/O Port
Adjustment screw for feed gap size
Pocket for Colleting Dusts on Operation
Adjustable Guides to Note Size
Latch Handle to open Upper Cover
Latch Handle to open Lower Cover
Switch for Power On/Off
I/O port (Refer to “I/O port” on page12)
Installation Guide
Name of Each Part (Rear View)
Table of contents
Other Puloon Banknote Counter manuals
