ProX PA-5822 M1 User manual

USER’S

MANUAL

PA-5822 Series

15” Fanless Slim POS

Terminal with Intel®

Celeron® J1900 Quad-Core

PA-5822 M1

PA-5822 POS System

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in September 2017. You may not

reproduce or transmit in any form or by any means, electronic, or

mechanical, including photocopying and recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery

is incorrectly replaced. Replace the battery only with the

same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

WARNING: Some internal parts of the system may have high

electrical voltage. We strongly recommend that only qualified

engineers are allowed to open and disassemble the system.

Please operate the LCD and Touchscreen with extra care as

they can be broken easily.

Contents

Revision History ...........................................................................................viii

1 Introduction.........................................................................................1-1

1.1 About This Manual.......................................................................1-2

1.2 POS System Diagrams................................................................1-3

1.2.1 Panel PC..............................................................................1-3

1.2.2 Normal Stand .......................................................................1-4

1.2.3 Normal Stand with 15” 2nd display........................................1-5

1.2.4 Normal Stand with VFD........................................................1-6

1.3 System Specifications..................................................................1-7

1.4 Safety Precautions.....................................................................1-10

2 System Configuration.........................................................................2-1

2.1 System External I/O Ports Diagram & Pin Assignment ...............2-2

2.2 Function Buttons and I/O Ports ...................................................2-3

2.2.1 Power Button........................................................................2-3

2.2.2 DC-IN Port............................................................................2-3

2.2.3 VGA Port ..............................................................................2-3

2.2.4 COM Port .............................................................................2-4

2.2.5 USB Port ..............................................................................2-4

2.2.6 LAN Port...............................................................................2-5

2.2.7 Printer Power Port (Optional)...............................................2-6

2.2.8 Cash Drawer Port.................................................................2-6

2.2.9 2nd Display Power Port........................................................2-6

2.2.10 PS/2(I-BUT) Port (Optional).................................................2-6

2.3 Main Board Component Location & Jumper Settings .................2-7

2.4 Jumper & Connector Quick Reference Table ..............................2-9

2.5 Setting Jumpers.........................................................................2-10

2.6 Setting Main Board Connectors and Jumpers...........................2-12

2.6.1 COM, Cash Drawer Port Voltage Selection .......................2-12

2.6.2 COM Connectors ...............................................................2-13

2.6.3 i-Button Connector (1)........................................................2-13

2.6.4 COM2 & i-Button Function Selection.................................2-13

2.6.5 USB Connector ..................................................................2-14

2.6.6 LED Connector...................................................................2-14

2.6.7 Speaker Connector ............................................................2-14

2.6.8 Power Connector ...............................................................2-15

2.6.9 Inverter Connector .............................................................2-15

2.6.10 Touch Panel Connector......................................................2-15

2.6.11 Reserved Connectors ........................................................2-16

2.6.12 Panel Resolution Selection................................................2-17

2.6.13 Mini PCIE USB Selection...................................................2-17

2.6.14 i-Button Connector(2).........................................................2-18

2.6.15 LVDS Connector ................................................................2-19

2.6.16 Touch Panel Signal Interface Selection .............................2-20

2.6.17 SATA & SATA Power Connector.........................................2-21

2.6.18 Update BIOS Settings........................................................2-22

2.6.19 Clear CMOS Data Selection ..............................................2-22

2.6.20 LVDS Link (JP16)...............................................................2-23

2.6.21 LVDS Voltage Selection (JP17)..........................................2-23

2.6.22 Panel Enable (JP20)..........................................................2-24

2.6.23 Mini-PCIe / mSATA Connector...........................................2-24

2.7 VFD Board Component Locations & Pin Assignment ...............2-25

iii

2.7.1 VFD Board: MB-4003.........................................................2-25

2.7.2 Jumper & Connector Quick Reference Table.....................2-25

2.7.3 Setting MB-4003 VFD Board Connectors and Jumpers....2-25

2.7.3.1 Power Switch Selection ...............................................2-25

2.7.3.2 RS-232 Serial Interface Connector..............................2-26

3Software Utilities.................................................................................3-1

3.1 DRIVER .......................................................................................3-2

3.1.1 Introduction ..........................................................................3-2

3.1.2 Intel®Chipset Software Installation Utility............................3-6

3.1.2.1 Introduction ....................................................................3-6

3.1.2.2 Installing Intel®Chipset Driver .......................................3-6

3.1.3 Graphics Driver Utility ..........................................................3-6

3.1.3.1 Installing Graphics Driver...............................................3-6

3.1.4 LAN Driver Utility..................................................................3-7

3.1.4.1 Installing LAN Driver ......................................................3-7

3.1.5 Sound Driver Utility ..............................................................3-7

3.1.5.1 Installing Sound Driver...................................................3-7

3.1.6 Intel® Trusted Execution Engine Driver Installation.............3-8

3.1.6.1 Installing TXE Driver ......................................................3-8

3.1.7 Embedded Peripheral Devices ............................................3-9

3.1.7.1 VFD: MB-4003 (RS-232) Commands List .....................3-9

3.1.7.2 OPOS Driver ................................................................3-10

3.2 API.............................................................................................3-15

3.2.1 API Package Content.........................................................3-15

3.2.2 API Procedure....................................................................3-16

3.2.3 Cash Drawer ......................................................................3-19

3.2.4 Watchdog...........................................................................3-20

3.3 API Function ..............................................................................3-21

3.3.1 Cash Drawer Function .......................................................3-21

3.3.2 Watch Dog Function...........................................................3-22

3.4 BIOS Operation .........................................................................3-23

3.4.1 BIOS Setup ........................................................................3-23

3.4.1.1 Accessing Setup Utility ................................................3-24

3.4.2 Main....................................................................................3-26

3.4.2.1 Advanced .....................................................................3-27

3.4.2.2 Chipset.........................................................................3-47

3.4.2.3 Security ........................................................................3-51

3.4.2.4 Boot..............................................................................3-52

3.4.2.5 Save & Exit...................................................................3-54

3.4.3 Configuring WatchDog Timer.............................................3-56

3.4.4 Update Procedure..............................................................3-58

3.4.5 Resource Map....................................................................3-61

3.4.5.1 Interrupt Map................................................................3-61

3.4.5.2 I/O MAP........................................................................3-66

3.4.5.3 DMA Channels Map .....................................................3-68

3.4.5.4 Memory Map ................................................................3-69

Appendix A System Diagrams....................................................... 1

HDD Tray Disassembly .......................................................................................2

MSR module Assembly .......................................................................................3

i-Button module Assembly...................................................................................4

Fingerprint module Assembly .............................................................................5

Front Cover Module Exploded Diagram (Capacitive Touch Screen)............6

Panel Module Exploded Diagram (Capacitive Touch Screen).......................7

Motherboard Exploded Diagram (Capacitive Touch Screen).........................8

Back Cover Exploded Diagram (Capacitive Touch Screen)...........................9

Exploded Diagrams For Panel PC HDD Assembly (Capacitive Touch

Screen).................................................................................................................10

AI Cover Exploded Diagram (Capacitive Touch Screen).............................. 11

I/O Cover Exploded Diagram (Capacitive Touch Screen)............................12

Front Cover Module Exploded Diagram (Resistive Touch Screen).............13

Panel Module Exploded Diagram (Resistive Touch Screen) .......................14

Motherboard Exploded Diagram (Resistive Touch Screen).........................15

Back Cover Exploded Diagram (Resistive Touch Screen)...........................16

Exploded Diagrams For Panel PC HDD Assembly (Resistive Touch Screen)

..............................................................................................................................17

AI Cover Exploded Diagram (Resistive Touch Screen)................................18

I/O Cover Exploded Diagram (Resistive Touch Screen)...............................19

I-Button Exploded Diagram...............................................................................20

RFID Module Exploded Diagram .....................................................................21

RJ11 Cable Exploded Diagram ........................................................................22

Barcode Scanner Kit Exploded Diagram ........................................................23

Print Power Cable Exploded Diagram.............................................................24

Fingerprint Module Exploded Diagram............................................................25

MSR Module Exploded Diagram......................................................................26

List of Figures

Figure 2-1. PB-6722 Main Board Component Location.................... 2-7

Figure 2-2. MB-4003 VFD Board Component Locations ................ 2-25

Figure 3-1. Extensible Firmware Interface Diagram ....................... 3-23

Figure 3-2. POST Screen with AMI Logo........................................ 3-24

Figure 3-3. BIOS Setup Menu Initialization Screen ........................ 3-25

Figure 3-4. BIOS Main Menu ......................................................... 3-26

Figure 3-5. BIOS Advanced Menu.................................................. 3-27

Figure 3-6. ACPI Settings Screen .................................................. 3-28

Figure 3-7. F81866 Super IO Configuration Screen ....................... 3-29

Figure 3-8. Serial Port 1 Configuration Screen............................... 3-30

Figure 3-9. Serial Port 2 Configuration Screen............................... 3-31

Figure 3-10. Serial Port 3 Configuration Screen............................. 3-32

Figure 3-11. Serial Port 4 Configuration Screen............................. 3-33

Figure 3-12. Parallel Port Configuration Screen............................. 3-34

Figure 3-13. Hardware Monitor Screen.......................................... 3-36

Figure 3-14. F81866 Watchdog Screen.......................................... 3-37

Figure 3-15. CPU Configuration Screen......................................... 3-38

Figure 3-16. Socket 0 CPU Information Screen ............................. 3-39

Figure 3-17. IDE Configuration Screen .......................................... 3-40

Figure 3-18. OS Selection Screen.................................................. 3-42

Figure 3-19. CSM Configuration Screen ........................................ 3-43

Figure 3-20. USB Configuration Screen......................................... 3-45

Figure 3-21. Chipset Menu Screen ................................................ 3-47

Figure 3-22. North Bridge Menu Screen......................................... 3-48

Figure 3-23. LCD Control Screen................................................... 3-49

Figure 3-24. South Bridge Screen.................................................. 3-50

Figure 3-25. Security Menu Screen................................................ 3-51

vii

Figure 3-26. Boot Menu Screen..................................................... 3-52

Figure 3-27. Save & Exit Menu Screen.......................................... 3-54

Table of contents

Other ProX Touch Terminal manuals

ProX

ProX PA-J501 User manual

ProX

ProX MH-5106 User manual

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual