Press Menu to choose between Manual
Mode and Automatic Mode.
Manual mode: The schedule programme is overridden
and the temperature can be adjusted to your individual
requirements. The system will control at this temperature
without any change.
Automatic mode: System will control temperature
according to the preset temperature values in dierent
time settings. The Auto symbol will show, which means
the system is running under Automatic mode.
In the Automatic mode, the main display area will alternately
display the day of the week (WEEK) and the daily schedule
stage (STAGE).
In the sub-display it will show the set temperature and time
alternately.
Press UP & DOWN arrows to adjust temperature settings and
other settings.
Setting the time and day of the week
Press the Clock symbol for 5 seconds to enter into time
adjustment. The number representing the day of the week
will icker. Press UP or DOWN to select the day of the
week, 1 = Monday, 2 = Tuesday and so on. Press Clock again and
the hours will icker. Use UP or DOWN to set the correct hour
then press clock again, the minutes icker. Press UP or DOWN
to set the correct minutes. Press Clock again to conrm.
To check the oor temperature when the thermostat is set in
ALL mode, press Clock and DOWN at the same time. Then the
large main display will show the oor temperature. The label
FLOOR icon will appear in the lower sub-display.
Schedule Settings
Press Menu for 5 seconds to enter the schedule settings
mode. The display will show the featured week e.g. 5 + 2 / 6
+ 1 or 7 days. Each period can be set for the desired time and
temperature. Six periods can be set P1, P2, P3, P4, P5 & P6.
Use UP or DOWN to adjust the hours then press Menu, the
minutes icker. Press UP or DOWN to adjust the minutes. Press
Menu then the large temperature displayed will icker. Press
UP or DOWN to adjust to the desired temperature in period
P1. Press Menu to move onto the settings for P2. Repeat this
procedure through P1 to P6. You can press the Clock icon to
go back to previous settings. Finally, press ON/OFF twice
to confirm.
If you want to turn o a period, then in the temperature
setting for the period press DOWN until OFF is displayed in
the temperature screen then press Menu to conrm.
To quickly return to the original display press ON/OFF twice.
The system default is 5 + 2 and the default settings are as the
following table. For example, when the system time is Friday
08:20 under Automatic mode the display would show as
STAGE 2 and the set temperature value would be 15°C.
5+2 mode ID P1 P2 P3 P4 P5 P6
Monday to
Friday
Start time 06:00 08:00 11:30 12:30 17:00 22:00
Set value 22℃15℃15℃15℃22℃15℃
Saturday to
Sunday
Start time 06:00 08:00 11:30 12:30 17:00 22:00
Set value 22℃15℃15℃15℃22℃15℃
Temperature Override Facility –
Manual Mode Only
This allows you to override the temperature setting at any
time. For example, you arrive home early and want the
heat on. Press Menu to enter Manual mode. Assume the set
point in the schedule was 15ºC and the room temperature is
actually 18ºC. The heating will not be energised in this setting.
Press UP or DOWN to adjust the temperature above 18ºC. Let’s
say 22ºC, and the heating symbol will appear and the heating
is now ON.
Three types of Temperature Control
and Display
The thermostat can be set to operate in three dierent modes;
IN: Internal, OUT: External, ALL: combined internal and
external. The default setting is IN. Enter the advance functions
to change the mode setting.
Internal control (IN): Based on built-in sensor temperature
measurement & suitable for detection of air or room
temperature only.
External control (OUT): Based on external temperature
measurement & suitable for oor temperature control only.
Dual temperature control (ALL): Temperature control
based on built-in internal temperature sensor and external
temperature sensor (over temperature protection). Suitable
for detection of room temperature and oor temperature
monitoring. If the external sensor is over temperature, the
thermostat will shut down the heater.
When the setting is IN or ALL the main display shows air or
room temperature. When the thermostat is set in OUT mode,
the oor icon will be lit and the main screen will display oor
temperature.
