Protech PA-3110 User manual

USER’S

MANUAL

PA-3110

Mini POS Terminal Powered by

NVIDIA

Tegra

3 Platform

PA-3110 POS System

With LCD/Touchscreen

All trademarks and registered trademarks mentioned herein are the property of their

respective owners.

This manual is copyrighted June 2013. You may not reproduce or transmit in any

form or by any means, electronic, or mechanical, including photocopying and

recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up the system. The

information contained in this document is subject to change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment not expressly

approve by the party responsible for compliance could void your authority to operate

such equipment.

CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions.

WARNING! Some internal parts of the system may have high electrical voltage. And

therefore we strongly recommend that qualified engineers can open and disassemble the

system.The LCD and Touchscreen are easily breakable, please handle them with extra

care.

Contents

TABLE OF CONTENTS

CHAPTER 1 INTRODUCTION

1-1 About This Manual…...................................................................

1-2

1-2 POS System Illustration…............................................................

1-3

1-3 System Specification….................................................................

1-7

1-4 Safety Precautions…....................................................................

1-9

CHAPTER 2 SYSTEM CONFIGURATION

2-1 Jumper & Connector Quick Reference Table…...........................

2-2

2-2 How to Set the Jumpers…............................................................

2-4

2-3 Main Board Component Locations & Jumper Settings………….

2-6

2-4 Printer Board Component Locations & Jumper Settings..............

2-23

2-5 VFD Board Component Locations & Jumper Settings.................

2-28

2-6 MSR Board Component Locations & Jumper Settings................

2-31

2-7 Inverter Board Component Locations & Jumper Settings………

2-34

CHAPTER 3 SOFTWARE UTILITIES

3-1 OS API………………………………..........................................

3-2

3-2 Firmware Control Command……................................................

3-16

3-3 Utility Update…………...............................................................

3-81

CHAPTER A SYSTEM DIAGRAMS

Exploded Diagram for System Top Module…………………………….

A-2

Exploded Diagram for Printer….…….…………………………............

A-12

Exploded Diagram for System Bottom Module………………………...

A-23

Exploded Diagram for Main Board...………………………...................

A-25

Exploded Diagram for MSR………..………………………...................

A-27

Exploded Diagram for VFD………..………………………...................

A-29

Page:1-1

INTRODUCTION

CHAPTER

This chapter gives you the information for the PA-3110. It also outlines

the system specifications.

Sections included:

About This Manual

POS System Illustration

System Specifications

Safety precautions

Experienced users can jump to chapter 2 on page 2-1

for a quick start.

Chapter 1 Introduction

Page: 1-2 PA-3110 USER



S MANUAL

1-1. ABOUT THIS MANUAL

Thank you for purchasing our PA-3110 Series System. The PA-3110 is an updated

system designed to be comparable with the highest performance of IBM AT personal

computers. The PA-3110 provides faster processing speed, greater expandability and

can handle more tasks than before. This manual is designed to assist you how to

install and set up the whole system. It contains four chapters and two appendixes.

Users can configure the system according to their own needs.

Chapter 1 Introduction

This chapter introduces you to the background of this manual. It also includes

illustrations and specifications for the whole system. The final section of this chapter

indicates some safety reminders on how to take care of your system.

Chapter 2 System Configuration

This chapter outlines the location of main board components and their function. You

will learn how to set the jumpers and configure the system to meet your own needs.

In addition to the main board, there are also printer board, VFD board, MSR board

and Inverter board.

Chapter 3 Software Utilities

This chapter contains information of software version list, firmware control command

and utility update.

Appendix A System Diagrams

This chapter shows the exploded diagrams and part numbers of PA-3110 components.

Chapter 1 Introduction

1-2. POS SYSTEM ILLUSTRATION

i-Botton Type

Front View Rear View

Top View Bottom View

I/O View

USB2

USB1

COM2

COM1

LAN

VGA

DRW

DC IN

PA-3110 USER



S MANUAL Page: 1-3

Chapter 1 Introduction

Quarter View Side View

22° 23.3°

22°

30.3°

Page: 1-4 PA-3110 USER



S MANUAL

Chapter 1 Introduction

Empty Type

Front View Rear View

Top View Bottom View

I/O View

USB2

USB1

COM2

COM1

LAN

VGA

DRW

DC IN

PA-3110 USER



S MANUAL Page: 1-5

Chapter 1 Introduction

Quarter View Side View

22°

23.3°

22°

30.3°

Page: 1-6 PA-3110 USER



S MANUAL

Table of contents

Other protech Touch Terminal manuals

protech

protech POS-6510 Series User manual

protech

protech prox PA-J580 User manual

protech

protech PA-3310 User manual

protech

protech PA-J501 User manual

protech

protech prox PA-J511 User manual

protech

protech prox PA-J500 User manual

protech

protech prox KF-P231 User manual

protech

protech PA-3211 User manual

protech

protech PA-A901 User manual

protech

protech PA-3570 Series User manual

protech

protech MH-5752 User manual

protech

protech PA-6722 User manual

protech

protech prox PA-A310 User manual

protech

protech PA-6225 User manual

protech

protech PA-6222 User manual

protech

protech prox PA-J670 User manual

protech

protech POS-3152 Series User manual

protech

protech KF-7130 User manual

protech

protech prox PA-6980 User manual

protech

protech prox KS-M333 User manual

protech

protech prox PA-J581 User manual

protech

protech PA-2019 Series User manual

protech

protech POS-3150 Series User manual

protech

protech PA-J580 Series User manual

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual

protech PA-3110 User manual

Popular Touch Terminal manuals by other brands