Protech MH-5752 User manual

USER

MANUAL

MH-5752

7" Integrated Handy POS

with Intel®Atom®x5-Z8550

Quad Core™ CPU

MH-5752 M2

MH-5752

7" Integrated Handy POS with Intel®

Atom®x5-Z8550 Quad Core™ CPU

All trademarks and registered trademarks mentioned herein are the

property of their respective owners.

This manual is copyrighted in Aug 2018. You may not reproduce or

transmit in any form or by any means, electronic, or mechanical,

including photocopying and recording.

DISCLAIMER

This user’s manual is meant to assist users in installing and setting up

the system. The information contained in this document is subject to

change without any notice.

CE NOTICE

This is a class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

FCC NOTICE

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

You are cautioned that any change or modifications to the equipment

not expressly approve by the party responsible for compliance could

void your authority to operate such equipment.

CAUTION: Danger of explosion may occur when the battery

is incorrectly replaced. Replace the battery only with the

same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s

instructions.

WARNING: Some internal parts of the system may have high

electrical voltage. We strongly recommend that only qualified

engineers are allowed to service and disassemble the

system. If any damages should occur on the system and are

caused by unauthorized servicing, it will not be covered by

the product warranty.

Contents

1 Introduction .........................................................................................1-1

1.1 About This Manual .....................................................................1-2

2 Getting Started....................................................................................2-1

2.1 Package List...............................................................................2-2

2.2 System Overview .......................................................................2-3

2.3 Specifications.............................................................................2-7

2.4 Safety Precautions.....................................................................2-9

3 Hardware Configuration.....................................................................3-1

3.1 Main Board Component Locations.............................................3-2

3.1.1 Main Board Component Locations .....................................3-2

3.2 Mainboard Connectors Quick Reference Table .........................3-4

3.3 Setting Pad Main Board Connectors..........................................3-5

3.3.1 Touch Screen Connector ....................................................3-5

3.3.2 NFC Connector...................................................................3-5

3.3.3 LCD Connector...................................................................3-6

3.3.4 RTC Battery Connector.......................................................3-7

3.3.5 Battery Connector...............................................................3-7

3.3.6 Barcode Scanner Connector ..............................................3-8

3.3.7 Speaker Connector.............................................................3-8

3.3.8 Power Switch Button...........................................................3-9

3.3.9 Barcode Switch Button .......................................................3-9

3.3.10 DC IN USB Type C Connector..........................................3-10

3.3.11 Cradle Connector..............................................................3-11

3.3.12 MCU F/W Update Connector............................................3-11

3.3.13 MINI-PCIE Connector.......................................................3-12

3.3.14 CCD Front Camera Connector.........................................3-13

3.3.15 MSR Connector ................................................................3-14

3.3.16 SIM Card Connector.........................................................3-14

3.3.17 TXE lock for manufactured Connector .............................3-15

3.3.18 Vibrator Connector............................................................3-15

4 Software Utilities.................................................................................4-1

4.1 Introduction.................................................................................4-2

4.2 Installing Intel®Chipset Software Installation Utility...................4-3

4.3 Installing Audio Realtek Software Installation Utility ..................4-5

4.4 Installing G-Sensor Software Installation Utility.........................4-6

4.5 Installing Bluetooth Software Installation Utility .........................4-7

4.6 Installing Light Sensor Software Installation Utility ....................4-8

4.7 Installing Microsoft Hotfix kb3211320 and kb3213986 Driver

Utility…..............................................................................……..4-9

5 BIOS SETUP ........................................................................................5-1

5.1 Introduction.................................................................................5-2

5.2 Accessing Setup Utility...............................................................5-3

5.3 Main............................................................................................5-6

5.4 Advanced ...................................................................................5-9

5.4.1 Advanced –Security Configuration ..................................5-10

5.4.2 Advanced –Chipset Configuration...................................5-12

5.4.3 Advanced –USB Configuration........................................5-13

5.5 Security ....................................................................................5-14

iii

5.6 Boot..........................................................................................5-16

5.7 Exit ...........................................................................................5-18

Appendix A System Diagrams....................................................A-1

Exploded Diagrams..........................................................................................A-2

Appendix B Technical Summary ................................................B-1

Interrupt Map.....................................................................................................B-2

I/O Map ............................................................................................................B-20

DMA Map.........................................................................................................B-23

Memory Map...................................................................................................B-24

System BIOS Update Procedure .................................................................B-27

Revision History

The revision history of MH-5752 User Manual is described below:

Version No.

Revision History

Date

Initial Release

08/2018

Modify Software Utilities

02/2020

MH-5752 SERIES USER MANUAL

Page: 1-1

1 Introduction

This chapter provides the introduction for the MH-5752

system as well as the framework of the user manual.

The following topic is included:

•About This Manual

Chapter 1 Introduction

MH-5752 SERIES USER MANUAL

Page: 1-2

1.1 About This Manual

Thank you for purchasing our MH-5752 system. The MH-5752 provides faster

processing speed, greater expandability and can handle more tasks than before. This

manual is designed to assist you how to install and set up the whole system. It

contains 5 chapters and 2 appendixes. Users can configure the system according to

their own needs. This user manual is intended for service personnel with strong

hardware background. It is not intended for general users.

The following section outlines the structure of this user manual.

Chapter 1 Introduction

This chapter provides the introduction for the MH-5752 system as well as the

framework of the user manual.

Chapter 2 Getting Started

This chapter describes the package contents and outlines the system specifications.

Read the safety reminders carefully on how to take care of your system properly.

Chapter 3 System Configuration

This chapter outlines the locations of the motherboard components and their

respective functions. You will learn how to set the jumpers and configure the system

to meet your own needs.

Chapter 4 Software Utilities

This chapter contains helpful information for proper installations of the Intel Chipset

Software Installation Utility, Audio Realtek Driver Utility, G-Sensor Driver Utility,

Bluetooth Driver Utility and wireless GSM (3G) Driver Utility.

Chapter 5 BIOS Setup

This chapter indicates how to change the BIOS configurations.

Appendix A System AssemblyDiagrams

This appendix provides the exploded diagrams and part numbers of the MH-5752.

Appendix B Technical Summary

This appendix provides the information about the allocation maps for system

resources and System BIOS update procedure.

MH-5752 SERIES USER MANUAL

Page: 2-1

2Getting Started

This chapter provides the information for the MH-5752

system.

The following topics are included:

•Package List

•System Diagrams

•Specifications

•Safety Precautions

Experienced users can go to Chapter 3 Hardware

Configuration on page 3-1 for a quick start.

Table of contents

Other protech Touch Terminal manuals

protech

protech POS-6510 Series User manual

protech

protech prox PA-J600 User manual

protech

protech PA-3110 User manual

protech

protech PA-6225 User manual

protech

protech prox PA-A310 User manual

protech

protech POS-6511 Series User manual

protech

protech PA-6970 Series User manual

protech

protech PA-6610 User manual

protech

protech PS8852 User manual

protech

protech prox PA-6980 User manual

protech

protech PA-5685 User manual

protech

protech prox PA-A900 User manual

protech

protech PA-6722 User manual

protech

protech PA-6980 Series User manual

protech

protech POS-3152 Series User manual

protech

protech POS-3120 Series User manual

protech

protech PA-3350 Series User manual

protech

protech prox PA-J511 User manual

protech

protech PA-J581 Series User manual

protech

protech POS-3150 Series User manual

protech

protech PA-6222 User manual

protech

protech PA-3211 User manual

protech

protech prox PA-J510 User manual

protech

protech PA-2019 Series User manual

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual

protech MH-5752 User manual

Popular Touch Terminal manuals by other brands