Prompter People Convertible 10 Manual
Convertible 10 Set-Up Sheet, Handhelp Mount
Place LCD on arm.
Slide beamsplitter frame
onto top plate.
Secure LCD with thumb screw.
1
2
3
Rev: 072508
(Clean beasplitter with included yellow microfiber cloth)
Slide beamsplitter
into beamsplitter
frame.
Place lens through hood
and tighten the drawstring.
Secure teleprompter
to camera with either
thumb screw or socket
cap screw.
Secure beamsplitter frame
with wing nuts.
4
5
6
To accommodate larger cameras the Convertible 10 sled can be flipped upside down so the monitor/beamsplitter
attachment point is on the top level of the sled.
Attach LCD/Beamsplitter assembly
to teleprompter sled.
Adjust height of LCD/beamsplitter
assembly so lens is in the middle.
Tighten thumb screw.
7
LCD Cable Connections
The LCD display comes with a breakout cable to connect power, video and audio.
The monitor comes configured from the factory with the monitor set reversed for teleprompter
applications. You can also configure the monitor for non-reversed mode by following the directions
in the LCD manual on page 1.
Monitor reversing can also be achieved by pressing this button (which is to the right of the “3” on the remote):
Note: You will need to turn on your laptop’s VGA port to send a signal to the teleprompter. Consult your computer
manual for information on which hot-keys will do this.
Mac users should use the adapters supplied with their computer to provide VGA output.
Connect the round end of the gray VGA cable to the " VGA Input" connector on the LCD display.
Rev: 072508
1
Connect the opposite end of the VGA cable to the 15 pin VGA connector on your computer.
2
Connect the cable at the end of the AC adapter to the “Power Input” on the LCD display
3
AC Adapter
Laptop Computer
VGA Output
This button will continue to rotate
the display in 90 degree increments.
Convertible 10 Set-Up Sheet
Other Prompter People Camera Accessories manuals
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
