ProMinent Vario C User manual
Metering pumps
Vario C, VAMC
Operating instructions
EN
Original operating instructions (2006/42/EC)Part no. 987096 BA VA 022 08/18 EN
Please carefully read these operating instructions before use. · Do not discard.
The operator shall be liable for any damage caused by installation or operating errors.
The latest version of the operating instructions are available on our homepage.
Read the following supplementary information in its entirety! Should you
already know this information, you will benefit more from referring to the
operating instructions.
The following are highlighted separately in the document:
nEnumerated lists
Operating guidelines
ðOutcome of the operating guidelines
- see (reference)
Information
This provides important information relating to the cor‐
rect operation of the unit or is intended to make your
work easier.
Safety notes
Safety notes are identified by pictograms - see Safety Chapter.
These operating instructions conform to current EU regulations applicable
at the time of publication.
Please state identity code and serial number, which you can find on the
nameplate when you contact us or order spare parts. This enables the
device type and material versions to be clearly identified.
Supplementary information
Fig. 1: Please read!
Validity
State the identity code and serial number
Supplemental directives
2
Table of contents
1Identity code.................................................................................... 4
2 Safety Chapter................................................................................. 5
3 Carrying out repairs......................................................................... 9
4 Information on disposal................................................................. 12
5 Technical Data............................................................................... 13
5.1 Performance data.................................................................. 13
5.2 Precision............................................................................... 13
5.3 Shipping weight..................................................................... 13
5.4 Wetted materials................................................................... 14
5.5 Ambient conditions................................................................ 14
5.5.1 Ambient temperatures........................................................ 14
5.5.2 Media temperatures........................................................... 14
5.5.3 Air humidity........................................................................ 14
5.6 Motor data............................................................................. 14
5.7 Stroke sensor "Sigma".......................................................... 15
5.8 Sound pressure level............................................................ 15
5.9 Supplementary information for modified versions................. 15
6 Dimensional Drawings................................................................... 16
7Diagrams for Setting the Capacity................................................. 17
8 Wear parts Vario C, VAMC............................................................ 18
8.1 Spare parts kits..................................................................... 18
8.2 Diaphragms........................................................................... 18
9 Declaration of Conformity for Machinery....................................... 19
Table of contents
3
1 Identity code
Product range Vario, Version c
VAMC Capacity
_ _ _ _ _ Performance data at maximum back pressure and type: refer to nameplate on the pump housing
Material of dosing head/valves
PPE Polypropylene with EPDM seal
PCB PVC with EPDM seal
PVT PVDF with PTFE seal
SST Stainless steel with PTFE seal
Dosing head design
0 no valve spring (standard)
1 with 2 valve springs, Hastelloy C4
Hydraulic connector
0 Standard connection - Union nut with hose connection
1 Union nut and PVC insert
2 Union nut and PP insert
3 Union nut and PVDF insert
4 Union nut and stainless steel insert
5 Union nut and PVC tube nozzle
6 Union nut and PP tube nozzle
7 Union nut and PVDF tube nozzle
8 Union nut and stainless steel tube nozzle
Design
0with ProMinent® logo (standard)
M Modified
Motor connector
_ refer to nameplate on motor
Stroke sensor
0 No stroke sensor
3 with stroke sensor (Namur)
Setting the stroke length
0 Manual (standard)
Identity code
4
2 Safety Chapter
WARNING!
We should like to remind the operator of the pump that
he has a duty to use the advice on safety and operation
of the pump for operating instructions for his staff.
The following signal words are used in these operating instructions to
denote different severities of danger:
Signal word Meaning
WARNING Denotes a possibly dangerous sit‐
uation. If this is disregarded, you
are in a life-threatening situation
and this can result in serious inju‐
ries.
CAUTION Denotes a possibly dangerous sit‐
uation. If this is disregarded, it
could result in slight or minor inju‐
ries or material damage.
The following warning signs are used in these operating instructions to
denote different types of danger:
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
nOnly use the pump to meter liquid feed chemicals.
nOnly use the pump after it has been correctly installed and started up
in accordance with the technical data and specifications contained in
the operating instructions.
nObserve the general limitations with regard to viscosity limits, chem‐
ical resistance and density - see also ProMinent® resistance list (In the
product equipment catalogue or at
www.prominent.com
!
nAll other uses or modifications are prohibited.
nThe pump is not intended for the metering of gaseous media and
solids.
nThe pump is not intended to meter extremely hazardous media or
media harmful to life.
nThe pump is not intended to meter flammable media.
nThe pump is not intended to meter oxidants without the use of suitable
protective equipment.
nThe pump is not intended for the metering of explosive media.
nThe pump is not intended for operation in areas at risk from explosion.
nThe pump is not intended for unprotected outside use.
nThe pump is only intended for industrial use.
nThe pump should only be operated by trained and authorised per‐
sonnel.
nYou have a responsibility to adhere to the information contained in the
operating instructions at the different phases of the unit's service life.
General
Identification of safety notes
Warning signs denoting different types of
danger
Intended use
Safety Chapter
5
Action Qualification
Storage, transport, unpacking Instructed person
Assembly Technical personnel, service
Planning hydraulic installation Qualified personnel who have a
thorough knowledge of metering
pumps.
Hydraulic installation Technical personnel, service
Installation, electrical Electrical technician
Operation Instructed person
Maintenance, repair Technical personnel, service
Decommissioning, disposal Technical personnel, service
Troubleshooting Technical personnel, electrical
technician, instructed person,
service
Explanation of the terms:
Technical personnel
A qualified employee is deemed to be a person who is able to assess the
tasks assigned to him and recognise possible dangers based on his/her
technical training, knowledge and experience, as well as knowledge of
pertinent regulations.
Note:
A qualification of equal validity to a technical qualification can also be
gained by several years employment in the relevant work area.
Electrical technician
Electrical technicians are deemed to be people, who are able to complete
work on electrical systems and recognise and avoid possible dangers
independently based on their technical training and experience, as well as
knowledge of pertinent standards and regulations.
Electrical technicians should be specifically trained for the working envi‐
ronment in which they are employed and know the relevant standards and
regulations.
Electrical technicians must comply with the provisions of the applicable
statutory directives on accident prevention.
Instructed person
An instructed person is deemed to be a person who has been instructed
and, if required, trained in the tasks assigned to him/her and possible dan‐
gers that could result from improper behaviour, as well as having been
instructed in the required protective equipment and protective measures.
Service
Customer Service department refers to service technicians, who have
received proven training and have been authorised by ProMinent or Pro‐
Maqua to work on the system.
Qualification of personnel
Safety Chapter
6
WARNING!
Warning of hazardous feed chemical
Should a dangerous feed chemical be used: it may
escape from the hydraulic components when working on
the pump, material failure or incorrect handling of the
pump.
– Take appropriate protective measures before
working on the pump (e.g. safety glasses, safety
gloves, ...). Adhere to the material safety data sheet
for the feed chemical.
–Drain and flush the liquid end before working on the
pump.
WARNING!
Danger from hazardous substances!
Possible consequence: Fatal or very serious injuries.
Please ensure when handling hazardous substances
that you have read the latest safety data sheets provided
by the manufacture of the hazardous substance. The
actions required are described in the safety data sheet.
Check the safety data sheet regularly and replace, if
necessary, as the hazard potential of a substance can
be re-evaluated at any time based on new findings.
The system operator is responsible for ensuring that
these safety data sheets are available and that they are
kept up to date, as well as for producing an associated
hazard assessment for the workstations affected.
WARNING!
Danger of electric shock
A mains voltage may exist inside the pump housing.
– If the pump housing has been damaged, you must
disconnect it from the mains immediately. It may
only be returned to service after an authorised
repair.
CAUTION!
Warning of feed chemical spraying around
Feed chemical can spray out of the hydraulic compo‐
nents if they are manipulated or opened due to pressure
in the liquid end and adjacent parts of the system.
– Disconnect the pump from the mains power supply
and ensure that it cannot be switched on again by
unauthorised persons.
–Depressurise the system before commencing any
work on hydraulic parts.
CAUTION!
Warning of feed chemical spraying around
An unsuitable feed chemical can damage the parts of
the pump that come into contact with the chemical.
– Take into account the resistance of the wetted mate‐
rials and the ProMinent Resistance List when
selecting the feed chemical - see the ProMinent
Product Catalogue or visit ProMinent.
Safety information
Safety Chapter
7
CAUTION!
Danger of personnel injury and material damage
The use of untested third party parts can result in per‐
sonnel injuries and material damage.
– Only fit parts to metering pumps, which have been
tested and recommended by ProMinent.
CAUTION!
Danger from incorrectly operated or inadequately main‐
tained pumps
Danger can arise from a poorly accessible pump due to
incorrect operation and poor maintenance.
– Ensure that the pump is accessible at all times.
– Adhere to the maintenance intervals.
All isolating protective equipment must be installed for operation:
nDrive front cover
nMotor fan cowling
nMotor terminal box cover
nPlug (Pos. 9 in Fig. 6 in Chap. "Repair")
In the event of an electrical accident, disconnect the mains cable from the
mains or press the emergency cut-off switch fitted on the side of the
system!
If feed chemical escapes, also depressurise the hydraulic system around
the pump as necessary. Adhere to the safety data sheet for the feed
chemical.
Sound pressure level LpA < 70 dB according to EN ISO 20361
at maximum stroke length, maximum stroke rate, maximum back pressure
(water)
Isolating protective equipment
Information in the event of an emergency
Sound pressure level
Safety Chapter
8
3 Carrying out repairs
WARNING!
Only return the metering pump for repair in a cleaned
state and with a flushed liquid end - refer to the chapter
"Decommissioning"!
Only return metering pumps with a completed Decon‐
tamination Declaration form. The Decontamination Dec‐
laration constitutes an integral part of an inspection /
repair order. A unit can only be inspected or repaired
when a Declaration of Decontamination Form is sub‐
mitted that has been completed correctly and in full by
an authorised and qualified person on behalf of the
pump operator.
The "Decontamination Declaration Form" can be found
at www.prominent.de.
WARNING!
Warning of hazardous feed chemical
Should a dangerous feed chemical be used: it may
escape from the hydraulic components when working on
the pump, material failure or incorrect handling of the
pump.
– Take appropriate protective measures before
working on the pump (e.g. safety glasses, safety
gloves, ...). Adhere to the material safety data sheet
for the feed chemical.
– Drain and flush the liquid end before working on the
pump.
CAUTION!
Warning of feed chemical spraying around
Feed chemical can spray out of the hydraulic compo‐
nents if they are manipulated or opened due to pressure
in the liquid end and adjacent parts of the system.
– Disconnect the pump from the mains power supply
and ensure that it cannot be switched on again by
unauthorised persons.
–Depressurise the system before commencing any
work on hydraulic parts.
CAUTION!
Warning of feed chemical spraying around
An unsuitable feed chemical can damage the parts of
the pump that come into contact with the chemical.
– Take into account the resistance of the wetted mate‐
rials and the ProMinent Resistance List when
selecting the feed chemical - see the ProMinent
Product Catalogue or visit ProMinent.
Safety information
Carrying out repairs
9
CAUTION!
Warning of feed chemical spraying around
PTFE seals, which have already been used / com‐
pressed, can no longer reliably seal a hydraulic connec‐
tion.
– New, unused PTFE seals must always be used.
CAUTION!
Danger of personnel injury and material damage
The use of untested third party parts can result in per‐
sonnel injuries and material damage.
– Only fit parts to metering pumps, which have been
tested and recommended by ProMinent.
P_VA_0005_SW
1
2
3
9
4
6
5
Fig. 2: Liquid end parts
1 Suction connector
2 Dosing head
3 Pressure connector
4 Diaphragm
5 Backplate
6 Slide rod
9 Plug
nIf necessary take protective measures.
nAdhere to the material safety data sheet for the feed chemical.
nEnsure that the system is at atmospheric pressure.
1. Empty the liquid end (turn the liquid end upside down and allow the
feed chemical to run out; flush out with a suitable medium; flush the
liquid end thoroughly when using hazardous feed chemicals!)
2. Turn the stroke adjustment dial as far as 0% stroke length when the
pump is running (the drive axle is then difficult to turn).
3. Switch off the pump and secure it to prevent it being switched on
again.
4. Unscrew the hydraulic connectors on the discharge and suction
side.
5. Remove the screws.
Carrying out repairs
10
This manual suits for next models
1
Table of contents
Other ProMinent Water Pump manuals
ProMinent
ProMinent delta Operating instructions
ProMinent
ProMinent alpha Series Operating instructions
ProMinent
ProMinent mikro delta User manual
ProMinent
ProMinent DULCO flex Control-DFYa User manual
ProMinent
ProMinent Sigma / 2 Basic S2Ba User manual
ProMinent
ProMinent EMFa User manual
ProMinent
ProMinent Makro TZ User manual
ProMinent
ProMinent EXtronic EXBb Series User manual
ProMinent
ProMinent gamma G/4b User manual
ProMinent
ProMinent mikro g/5a User manual
ProMinent
ProMinent DULCO Trans 40/1000 PVDF User manual
ProMinent
ProMinent DFB13 User manual
ProMinent
ProMinent gamma/ X Operating instructions
ProMinent
ProMinent Beta BT4a Instruction Manual
ProMinent
ProMinent DULCOflex DFAa 003 User manual
ProMinent
ProMinent Dulco Flex DF2a User manual
ProMinent
ProMinent DULCO flex Control - DFXa User manual
ProMinent
ProMinent Vario Series User manual
ProMinent
ProMinent Sigma 2 S2Ca User manual
ProMinent
ProMinent DULCO Trans 41/1200 PVDF User manual
Popular Water Pump manuals by other brands
Sykes AmeriPumps
Sykes AmeriPumps GP100M Operation and maintenance instructions
DUROMAX
DUROMAX XP WX Series user manual
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 operating instructions
Franklin Electric
Franklin Electric IPS Installation & operation manual
Xylem
Xylem e-1532 Series instruction manual
Milton Roy
Milton Roy PRIMEROYAL instruction manual