ProDevice OMS900 User manual
www.pro-device.com
INSTRUCTION MANUAL
ProDevice OMS900 Shredder
V.OMS900.2023.1.EN
Manufactured by: DISKUS Polska Sp. z o. o., ul. Kościuszki 1, 32-020 Wieliczka
Instruction manual ProDevice OMS900
CONTENTS
1. Features 04
2. Packaging removal 04
3. Overview 05
4. Operation 08
5. Destruction of storage media 09
6. Safety precautions 10
7. Maintenance
8. Possible faults and ways to fix them
12
13
2
www.pro-device.com
Thank you for purchasing the ProDevice OMS900 –the medium office media shredder for
physical destruction / disintegration of storage media which may include: hard disk drives
(HDD) and solid state drives (SSD), magnetic tapes, mobile phones and tablets (with the
battery packs removed), floppy disks, and more.
This user manual is integral to the shredder. Read and understand the manual before
operating the shredder. Keep the manual for future reference. The company Diskus Polska
sp. z o. o., as the manufacturer is not responsible for the partial or total failure to comply with
this manual.
Strictly follow the operating guidance specified in the user manual. Any deviation from it is
against the intended use of the shredder. The manufacturer will not be liable for any damage
caused by non-intended use of the shredder.
Never attempt to modify the shredder. The manufacturer will not be liable for the
performance or operating safety if the device is modified.
The manufacturer reserves the right to introduce changes to the design of devices, deemed
necessary by the manufacturer to improve them.
Refer to Instruction manual. Wear eye protection. Do not put hands inside.
3
www.pro-device.com
Instruction manual ProDevice OMS900
1. FEATURES
•ProDevice OMS900 shredder
•Set of keys for the key switch
•Plastic container for shredded data carriers
•Sprayer with oil for cutting knives
•Pendrive with manual instructions
2. PACKAGING REMOVAL
The shredder is delivered to the buyer on a pallet in a box. The weight of the shredder
requires a pallet truck or a forklift to remove it from the pallet. Carefully remove all packaging
materials and verify that the contents are complete as listed in the product features above.
Having removed the packaging materials, immediately inspect the shredder for any evidence
of damage in transport. If the shredder or any of its dedicated accessories are damaged,
report this to the shipment forwarder and the manufacturer.
With all packaging materials removed, place the shredder on a firm surface at the
designated, sheltered installation site. Secure the shredder in position to prevent movement.
It is recommended to apply oil to the cutting blades before every use to extend the life span
of the cutting blades greatly.
4
www.pro-device.com
Instruction manual ProDevice OMS900
3. OVERVIEW
3D view
1. Key switch.
2. Emergency stop.
3. Media input.
4. Operator control panel.
5. LCD counter.
6. Shredded scrap bin compartment.
7. OVERLOAD circuit breaker (in the housing on the left side of the device).
5
www.pro-device.com
Instruction manual ProDevice OMS900
Operator control panel
1. KEY SWITCH: switches the shredder on/off.
2. EMERGENCY STOP: stops all shredder components.
3. START BUTTON: starts the shredder.
4. STOP BUTTON: stops the shredder while running.
5. REVERSE BUTTON: switches over the sense of rotation of the shredding blades.
6. RUNNING INDICATOR: the word "RUNNING" lights up during operation.
7. CLEANING ICON: lights up when the cutting blades cleaning function is activated –
after pressing the REVERSE button for 6 seconds.
8. DOOR OPEN ICON: lights up when the door of the waste bin or media compartment
is open.
9. FULL ICON: lights up when the shredded scrap bin is full.
10. OVERLOAD BAR: displays the current engine load while running.
6
www.pro-device.com
Instruction manual ProDevice OMS900
Destroyed media counter
1. COUNTER: Enables the display of an erasable counter.
2. RESET: when pressed for 3 seconds, resets an erasable counter.
3. TOTAL: enables the display of a non-resettable counter.
4. DISPLAY: displays the current odometer reading.
7
www.pro-device.com
Instruction manual ProDevice OMS900
8
Technical specification
Power supply 3PH 380-480V 50/60Hz
Rated current 9.5 A
Maximum current 30 A
Motor power 3.75 kW (5.0 HP)
Power plug PCE 3P+N+E 400V 32A IP44
Security level (DIN 66399) E-2, H-3/H-4
Ambient temperature 5°C –45°C (41°F − 104°F)
Ambient humidity 10% − 70% (no condensation)
Sound intensity at idle 55 dB
Dimensions 820 mm x 1190 mm x 1285 mm
(32.3 in x 46.9 in x 50.6 in)
Weight 920 kg (2028.3 lb)
Waste container capacity 30 l (7.9 gal)
www.pro-device.com
Instruction manual ProDevice OMS900
4. OPERATION
1. Place the shredder on a hard surface in the designated, sheltered installation area.
2. Secure the shredder against shifting by by tightening the wheel brake bolts.
3. Make sure the shredded scrap bin is in the compartment and that the compartment
door is closed.
4. Open both media input compartments.
5. Apply the oil for cutting knives.
6. Extend the power cord and plug it into a power outlet.
7. Insert the key into the key switch.
8. Turn on the shredder with the key switch.
9. Start the cleaning function by holding down the REVERSE button for 6 seconds.
10. After cleaning, the shredder is ready for use. Place the storage device in the media input
compartment and close it.
11. Start the shredder by pressing the START button.
12. The device starts the work in an automatic mode. To shred another media, put it in the
media input.
13. The shredder will stop its work after 5 minutes. To restart it, press the START button.
14. Stop the shredder by pressing the STOP button.
15. In the event of overloading the device, the work of the shredding knives will be stopped.
To restart the shredder, open the OVERLOAD circuit breaker compartment in the housing
on the left side of the device and lift it up. Then start the shredder operation by pressing
the START button.
16. In case of pressing the EMERGENCY STOP button, the work of shredding knives will be
stopped. To restart the shredder, raise the EMERGENCY STOP button to its original
position, then press the START button.
17. To properly shut down the device, after the shredding cycle is complete, press the STOP
button and use the key switch.
18. Disconnect the power cord from the power outlet and wind it up.
9
www.pro-device.com
Instruction manual ProDevice OMS900
5. DESTRUCTION OF STORAGE MEDIA
The OMS900 shredder is designed to destroy data carriers that are available on the market.
By placing the media in the media input, you can shred various types of media as well as
media of various sizes.
A maximum of one carrier can be shredded in one cycle.
Only flash media and 2.5 ”hard drives can be placed in the right-side media input.
The ProDevice OMS900 shredder can be used for continuous operation.
In the case of destroying hard drives, it is recommended that the 30 minutes break in the
operation of the device be done after 4 hours of continuous operation. In the case of other
data carriers, this time may be extended to 6 hours.
10
DANGER!
It is prohibited to open device housing!
Removing the housing causes risk of electric shock, injury, serious injury
and / or death.
MANDATORY!
Wear safety glasses at all times when working with the device.
CAUTION!
The shredder can always be stopped by operating:
•The STOP button.
•The EMERGENCY STOP button.
•The KEY switch.
www.pro-device.com
Instruction manual ProDevice OMS900
Table of contents
Other ProDevice Paper Shredder manuals
Popular Paper Shredder manuals by other brands
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Start here
GBC
GBC ShredMaster CC055 instruction manual
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
Rexel
Rexel Optimum AutoFeed+ 45X instruction manual
Martin Yale
Martin Yale 227284S1 instruction manual
