ProDevice OMS500 User manual
www.pro-device.com
INSTRUCTION MANUAL
ProDevice OMS500 Shredder
V.OMS500.2023.1.EN
Manufactured by: DISKUS Polska Sp. z o. o., ul. Kościuszki 1, 32-020 Wieliczka
Instruction manual ProDevice OMS500
CONTENTS
1. Features 04
2. Packaging removal 04
3. Overview 05
4. Operation 08
5. Instruction video 09
6. Destruction of storage media 10
7. Safety precautions 11
8. Maintenance
9. Possible faults and ways to fix tchem
13
14
2
www.pro-device.com
Thank you for purchasing the ProDevice OMS500 –the medium office media shredder for
physical destruction / disintegration of storage media which may include: hard disk drives
(HDD) and solid state drives (SSD), magnetic tapes, mobile phones and tablets (with the
battery packs removed), floppy disks, and more.
This user manual is integral to the shredder. Read and understand the manual before
operating the shredder. Keep the manual for future reference. The company Diskus Polska
sp. z o. o., as the manufacturer is not responsible for the partial or total failure to comply with
this manual.
Strictly follow the operating guidance specified in the user manual. Any deviation from it is
against the intended use of the shredder. The manufacturer will not be liable for any damage
caused by non-intended use of the shredder.
Never attempt to modify the shredder. The manufacturer will not be liable for the
performance or operating safety if the device is modified.
The manufacturer reserves the right to introduce changes to the design of devices, deemed
necessary by the manufacturer to improve them.
Refer to Instruction manual. Wear eye protection. Not for server hard disks. Do not put hands inside.
Instruction manual ProDevice OMS500
3
www.pro-device.com
Instruction manual ProDevice OMS500
1. FEATURES
•ProDevice OMS500 shredder
•Set of keys for the key switch
•Plastic container for shredded data carriers
•Sprayer with oil for cutting knives
•Pendrive with manual instructions
2. PACKAGING REMOVAL
The shredder is delivered to the buyer on a pallet in a box. The weight of the shredder
requires a pallet truck or a forklift to remove it from the pallet. Carefully remove all packaging
materials and verify that the contents are complete as listed in the product features above.
Having removed the packaging materials, immediately inspect the shredder for any evidence
of damage in transport. If the shredder or any of its dedicated accessories are damaged,
report this to the shipment forwarder and the manufacturer.
With all packaging materials removed, place the shredder on a firm surface at the
designated, sheltered installation site. Secure the shredder in position to prevent movement.
It is recommended to apply oil to the cutting blades before every use to extend the life span
of the cutting blades greatly.
4
www.pro-device.com
3. OVERVIEW
3D view
1. Key switch.
2. Emergency stop.
3. Media input.
4. Operator control panel.
5. LCD counter.
6. Shredded scrap bin compartment.
7. OVERLOAD circuit breaker (in the housing on the left side of the device).
Instruction manual ProDevice OMS500
5
www.pro-device.com
Operator control panel
1. KEY SWITCH: switches the shredder on/off.
2. EMERGENCY STOP: stops all shredder components.
3. START BUTTON: starts the shredder.
4. STOP BUTTON: stops the shredder while running.
5. REVERSE BUTTON: switches over the sense of rotation of the shredding blades.
6. RUNNING INDICATOR: the word "RUNNING" lights up during operation.
7. CLEANING ICON: lights up when the cutting blades cleaning function is activated –
after pressing the REVERSE button for 6 seconds.
8. DOOR OPEN ICON: lights up when the door of the waste bin or media compartment
is open.
9. FULL ICON: lights up when the shredded scrap bin is full.
10. OVERLOAD BAR: displays the current engine load while running.
Instruction manual ProDevice OMS500
6
www.pro-device.com
Destroyed media counter
1. COUNTER: Enables the display of an erasable counter.
2. RESET: when pressed for 3 seconds, resets an erasable counter.
3. TOTAL: enables the display of a non-resettable counter.
4. DISPLAY: displays the current odometer reading.
Instruction manual ProDevice OMS500
7
www.pro-device.com
Instruction manual ProDevice OMS500
8
Technical specification
Power supply 230 V ~ 50 Hz
Rated current 6.5 A
Maximum current 20 A
Motor power 1.5 kW (2.0 HP)
Security level (DIN 66399) E-2, H-3/H-4
Ambient temperature 5°C –45°C (41°F − 104°F)
Ambient humidity 10% − 70% (no condensation)
Sound intensity at idle 55 dB
Dimensions 620 mm x 920 mm x 1280 mm
(24.4 in x 36.2 in x 50.4 in)
Weight 473 kg (1042.8 lb)
Waste container capacity 30 l (7.9 gal)
www.pro-device.com
4. OPERATION
1. Place the shredder on a hard surface in the designated, sheltered installation area.
2. Secure the shredder against shifting by by tightening the wheel brake bolts.
3. Make sure the shredded scrap bin is in the compartment and that the compartment
door is closed.
4. Open both media input compartments.
5. Apply the oil for cutting knives.
6. Extend the power cord and plug it into a power outlet.
7. Insert the key into the key switch.
8. Turn on the shredder with the key switch.
9. Start the cleaning function by holding down the REVERSE button for 6 seconds.
10. After cleaning, the shredder is ready for use. Place the storage device in the media input
compartment and close it.
11. Start the shredder by pressing the START button.
12. The device starts the work in an automatic mode. To shred another media, put it in the
media input.
13. The shredder will stop its work after 5 minutes. To restart it, press the START button.
14. Stop the shredder by pressing the STOP button or by opening the input media drawer.
15. Place another media in the media input drawer and press the START button to restart
the device.
16. In the event of overloading the device, the work of the shredding knives will be stopped.
To restart the shredder, open the OVERLOAD circuit breaker compartment in the housing
on the left side of the device and lift it up. Then start the shredder operation by pressing
the START button.
17. In case of pressing the EMERGENCY STOP button, the work of shredding knives will be
stopped. To restart the shredder, raise the EMERGENCY STOP button to its original
position, then press the START button.
18. To properly shut down the device, after the shredding cycle is complete, press the STOP
button and use the key switch.
19. Disconnect the power cord from the power outlet and wind it up.
9
www.pro-device.com
Instruction manual ProDevice OMS500
5. INSTRUCTION VIDEO
Scan the QR code to watch an official video presenting correct usage of the ProDevice
OMS500 shredder.
The video is an inseparable part of this manual Instruction.
10
www.pro-device.com
Instruction manual ProDevice OMS500
Table of contents
Other ProDevice Paper Shredder manuals
Popular Paper Shredder manuals by other brands
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Start here
GBC
GBC ShredMaster CC055 instruction manual
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
UNITED OFFICE
UNITED OFFICE UAV 190 A1 operating instructions
Rexel
Rexel Optimum AutoFeed+ 45X instruction manual
Martin Yale
Martin Yale 227284S1 instruction manual
