PROAIM KITE-22-POPULAR User manual
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Kite-22 Crane Popular Package (KITE-22-POPULAR)
Ass e mb l y M a n u a l
Proaim 22 Long Telescopic Camera Jib Crane
Proaim 150mm Bowl Jib Stand with Spreader (LW-150)
D-33 Pro Camera Dolly
Sr. Pan Tilt Head with Accessories (PT-SR)
Proaim Zoom Control (P-ZC-3DV)
Proaim Customized Storage cases for Camera Jib Arm, Jib Stand & Accessories
Complimentary Tools and Tool Pouch/Wrap
2
Packaging Material of Box 1 & 2: 7x Jib Secons
Packaging Material of Box 3: Accessories of Jib Crane
Hub Mounng
Head Plaorm with Bolt, Sha
Collars, Washers and Nut
6x Shanks for Joining Arms
6x Locking Pins
Levelling Cable
Turn buckle
Joysck Controller Bracket
NOTE: We send the Jib secons in two boxes. One box has the secons with pipe packing and the other
box (cardboard box) has the rest of the secons. We only send one pipe packing for the jib secons. We
send the Dolly in cardboard box.
1
3
4
6
First Packing Includes
Jib Secons
Second Packing Includes
Jib Secons
Third Packing Includes
Accessories of Jib Crane
Fourth Packing Includes
Jib Stand
Fih Packing Includes
Dolly Pack
Sixth Packing Includes
Senior Pan-lt Head
3
Packaging Material of Box 4: LW-150 Jib Stand with (P-RB-SP) Spreader
LW-150 Jib Stand
(P-RB-SP) Spreader
Packaging Material of Box 5: Dolly
D-33 Pro Camera Dolly Dolly Feet
Packaging Material of Box 6: Sr.Pan and Tilt Head with Accessories (PT-SR)
Sr.Pan-Tilt Head
Cable XLR Cable
Joysck AC Adapter
Accessories
Universal Adapter
4
Safety Hints
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT DAMAGE TO EQUIPMENT
& OPERATOR!
The crane may not be assembled or operated under inuence of alcohol, drugs or any other intoxicang
substances. Lack of aenon while connecng the components together can cause substanal damage
to equipment / operator.
The crane may only be operated on levelled horizontal posion. Make sure that the surface is stable.
To prevent any harm or injury, properly join all secons of the crane. It is suggested to use the support
stand while telescoping the complete length.
Always connect the steel cables properly to provide stability to the system. They should not negavely
impact the movements of crane in any way.
Aer setup of the crane, the pan-lt head / gimbal head shall be posioned under the central pivot
secon. In assembled state, when the pan-lt head / gimbal head is higher than central pivot secon,
there should be someone to look aer the crane system.
The complete panning & liing range around it must be kept free. Avoid anybody standing under the
crane. No loose objects may be stored or placed on it. Be very careful while using indoors.
Never operate the crane in the immediate vicinity of high-voltage power cables. It holds danger to life.
Parcular care is required when operang the crane in unfavourable weather condions. The crane
must be shut down in sucient me. When it is used in a rainy day, the pan-lt head / gimbal head and
controlling bar shall be protected against rain.
When you want to transport the crane, lock the Pan & Tilt Axis for safety. Make sure that the
components do not rub together and cause any material wear.
Before the counterweights are removed, ensure the remote head is resng on the support stand. Then
gradually remove the counterweights before remote head, camera or other parts.
In the interest of safe crane operaon, avoid abruptly swivelling or stopping the crane, otherwise it may
cause serious damage to equipment.
FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE FREE OPERATION.
SHOULD YOU NEED ADDITIONAL INFORMATION, TECHNICAL ASSISTANCE IS AVAILABLE ‘ONLINE’ BY
CONTACTING THE SALES REPRESENTATIVE.
5
Now take out the Tripod Stand from its case,
and stretch its legs on oor as per the
requirement. Then ghten the knob to
secure it.
Match holes of the boom leg secon with
the upper leg secon to secure tripod stand
with Steel locking Pins and ghten the knob.
Jib Stand Setup
NOTE: We have provided double locking
precauons on Jib Stand. Pin is rst & primary,
locking knob is secondary locking so rst lock
the Pin to avoid slipping of stand.
Take out Spreader and spread it on oor and
open the legs (as per your requirement) of
spreader with the help of provided knob.
Put tripod stand on spreader & then lock it in
place with the rubber grips. (Note: Tighten
the ratchet knob of stand to secure it with
rubber grips.
Knob
Pin
Spreader Setup
NOTE: For seng up your Crane package with spreader or with oor dolly follow the below steps:
6
To open the legs of Dolly remove the bolts &
fully spread it on oor.
Then insert the bolts with their washer and
ghten the bolts properly.
Dolly Setup
NOTE: To keep the dolly in stac posion, lock
the wheels by pushing down the lever.
Remove the allen bolts from tripod holders.
Match the hole of Tripod holder with dolly to
insert the long bolt & ghten it with the help
of allen key.
NOTE: This dolly has various holes for exible mounng of Tripod.
Once all the above menoned steps are
completed, you will see the stand and
spreader as shown here.
7
Then ghten the provided knob of tripod
holder.
Install the Hub Assembly by sliding from the
boom side into the stand’s Mount opening.
Hub Secon Setup
NOTE: The Hub Assembly has several mounng holes. You can mount LCD Monitor or Joysck box to
this assembly if you want.
Remove ratchet knobs of the stand, Insert
the tripod legs into the feet on the dolly.
NOTE: This is the Pan Fricon Knob. Never pan the Jib with this knob ghtened. If this knob turns while
panning, it is too ght. Only ghten while parking the jib!
Insert the provided washer & knob to secure
the jib properly.
Insert the bolts with washers and ghten
properly with the help of Wrench.
8
Insert rear tube secon (secon 1) into the
hub assembly, slide secon 2 into secon 1
and align holes of the Secon 1 and secon 2
with the central hole of hub assembly.
Already aached 1st and 2nd jib secons,
insert it into the hub then insert the long bolt
and nut to Secure the secons properly.
Jib Secons Setup
21
Repeat this process for rest of the secons.
Aach them towards the other Secon 6 with
5 , 5 with 4, 4 with 3, 3 with 2 & 2 with 1. 321
Aer alignment of holes (Jib arms) insert
shank lock pin & ghten it from another side
with shank threaded cap. For double security
insert the locking pin from the top of jib arm.
NOTE: We have provided double locking precauons on Jib, Knob is rst and primary, pin is secondary
locking, so rst lock the knob to avoid slipping of secons.
Remove the bolt from head secon then
aach with the jib.
Head Secon Setup
9
Aach the provided bolt, sha collars,
washers and nut. Tighten all the Allen bolts
and nuts to secure properly as shown in the
image.
Connect the one end of Head Plaorm
Levelling cable with the head plaorm by
hooking the turnbuckle ends.
To mount Rear secon of jib, insert the bolt
with washers through one end of the secon
to other. Slide the bolt through and secure
by ghtening with hand.
Rear Frame Setup
Aach other end with the hub assembly.
Pan Tilt Head Setup
Aach the PROAIM SENIOR PAN TILT HEAD
base plaorm to the Tripod or jib arm using
the four ¼”screws. Tighten to secure.
10
Cables & Control Box Setup
Install the 12 volt DC power (4-pin XLR) in
rear of Joysck Box.
NOTE: Any 12 volt baery may operate the PROAIM Sr. PAN TILT HEAD as long as the connector mates
and is #1 pin Negave and #4 pin Posive.
CAUTION: DO NOT USE AN UNREGULATED POWER SUPPLY! IF USING A REGULATED POWER SUPPLY IT
MUST PRODUCE LESS THAN 12 VOLTS. MORE THAN 24 VOLTS MAY CAUSE PERMA-NENT DAMAGE.
JOYSTICK
The joysck may be operated hand held, from a at surface like a table top or aached to the boom arm
of the jib.
Aach the 4-pin power cord to the rear of
Joysck Box.
HEAD CABLE
PROAIM SR. PAN TILT HEAD Digital only
PROAIM Sr. PAN-TILT HEAD Digital only
Aach 4-pin male connectors of cable to the
four pin female connectors of head for
panning & lng.
If the Joysck Control is opposite, undo the
connectors at the motors rotate 180 degrees
and re-install.
Aach & secure your camera on camera
plaorm of Head with help of provided bolt.
Table of contents
Other PROAIM Camera Accessories manuals
PROAIM
PROAIM KITE-22-WONDER Manual instruction
PROAIM
PROAIM CINEMA Series User manual
PROAIM
PROAIM QR-ELMG-01 User manual
PROAIM
PROAIM Bowado Pro User manual
PROAIM
PROAIM Flylite Jr. FLT-JR User manual
PROAIM
PROAIM CINEMA TP-BIPT-01 User manual
PROAIM
PROAIM CINEMA Series User manual
PROAIM
PROAIM CINEMA ST-HWK-01 User manual
PROAIM
PROAIM CINEMA DL-PLRS-01 User manual
PROAIM
PROAIM CINEMA ST-ISOD-01 User manual
PROAIM
PROAIM Follow Focus X1 User manual
PROAIM
PROAIM CINEMA Series User manual
PROAIM
PROAIM P-TP-100-B User manual
PROAIM
PROAIM DL-PLRS-P01 User manual
PROAIM
PROAIM VI-GLDE-01 User manual
PROAIM
PROAIM P-MTCL-STD-BLK User manual
PROAIM
PROAIM LB230 User manual
PROAIM
PROAIM SL-051 User manual
PROAIM
PROAIM SC-03 User manual
PROAIM
PROAIM RS-1 User manual
Popular Camera Accessories manuals by other brands
Viltrox
Viltrox EF-NEX Mount instructions
Calumet
Calumet 7100 Series CK7114 operating instructions
Ropox
Ropox 4Single Series User manual and installation instructions
Cambo
Cambo Wide DS Digital Series Main operating instructions
Samsung
Samsung SHG-120 Specification sheet
Ryobi
Ryobi BPL-1820 Owner's operating manual
