Pro-Ject Audio Systems Power Box RS Amp User manual

INSTRUCTIONS FOR USE

Pro-Ject Power Box RS Amp

Dear music lover,

thank you for purchasing a Pro-Ject Audio Systems Power Box RS Amp.

In order to achieve maximum performance and reliability you should study these instructions for use

carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that

the voltage in your area meets the voltage requirements printed on the device.

Never handle the device while your hands are wet or damp.

Avoid letting liquids e

nter the device. Never place any item containing liquid, such as a flower vase

on or near the device. Never spill any liquid on the device or cables. Never place any naked flame

sources, such as lighted candles on or near the device. The product shall not

be used in damp or wet

locations, next to a bathtub, sink, swimming pool or any other similar conditions.

Connecting Power Box RS Amp

Connect the power cable to the unitand to the mains. Then use special supplied cable to connect the

Power Box RS Amp with the amplifier(s). Then the original power supply of the amplifier is no longer

required.

Make all connections whilst the Power Box RS Amp is

switched off or disconnected from the mains

Power Box RS Amp is designed only for Pro-Ject Audio Systems products with 2x48V power supply.

Amp Box DS, Amp Box DS Mono, Stereo Box RS, Amp Box RS, Amp Box RS Mono

and for any future

product with 2x48V power supply. Products with different input voltage cannot be used with the

Power Box RS Amp.

Connection to one amplifier

Any of listed Pro-Ject amplifiers

can be connected

Connection to two amplifiers

Connect only mono versions of the

amplifiers

Incorrect use

Power Box RS Amp is not designed

to drive two stereo amplifiers

Main power switch

The toggle switch on the left side will turn the unit on or off. The blue LED above the switch shows that the

unit is switched on.

Technical specifications Pro-Ject Power Box RS Amp

Input voltage: AC 230V/50Hz IEC C15 connector (120V/60Hz US version)

Output voltage: two outputs by 2 x 48V / 2.5A DC each

Filtration capacity: 40.000 µF

Output voltage ripple: 7mV peak to peak

Dimensions W x H x D: 201 x 72 x 195mm

Weight: 4,8kg

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer

for further advice. Only if the problem cannot be resolved there, the unit should be sent to the

responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these

instructions for use. Modification or

changes to any part of the product by unauthorized persons

release the manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems

The information was correct at the time of going

to press. The manufacturer reserves the right to

make

changes to the technical specification

without prior notice as deemed necessary to

uphold the ongoing process of technical

development.

Table of contents

Other Pro-Ject Audio Systems Amplifier manuals

Pro-Ject Audio Systems

Pro-Ject Audio Systems Head Box DS User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box Design Pre Box RS2 Digital User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box S2 Analogue User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject MaiA User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems DS2 User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box SE User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Box-Design MaiA S3 User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box MM User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box DS User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject MaiA DS User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Stereo Box User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box II User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject Audio Systems User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box USB User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box MK II User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Tube Box II User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Record Box E User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems CD Box User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems DAC Box TV User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pre Box S User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Stereo Box User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Phono Box USB V User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems Pro-Ject Head Box II User manual

Pro-Ject Audio Systems

Pro-Ject Audio Systems BOX-DESIGN Vinyl NRS Box S3 User manual

Popular Amplifier manuals by other brands

ASTRO

ASTRO HVO V40 P operating manual

Marantz

Marantz SUPERSCOPE BLA-545 Service data

NAD

NAD CI980 Quick setup guide

Technics

Technics SE-CH770 Service manual

Harman Kardon

Harman Kardon HK6300 instruction manual

NAD

NAD T975 owner's manual

McIntosh

McIntosh MA6850 Brochure & specs

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N manual

Viatron

Viatron Autrix Technical manual

GME

GME GA9800 instruction manual

Atlas

Atlas CP700 Specification sheet

Roland

Roland KC-1000 owner's manual

Pyle

Pyle PFMRA350BW user manual

Advantage

Advantage S-250 manual

IRT Electronics

IRT Electronics DVA-3007 manual

Dimavery

Dimavery BA-100 Series user manual

Sony

Sony XM-S400D operating instructions

Schertler

Schertler ROY X quick guide