Primus PW 5 Manual

PW 5, DAM 5

INSTALLATION AND MAINTENANCE MANUAL WASHING MACHINE,

PUBLICATION DATE: 04/02 TUMBLE DRYER-

8065471 VENTED AND CONDENSED VERSION

INSTALLATION AND

MAINTENANCE

WASHING MACHINE

TUMBLE DRYER

WASHING MACHINE 2-17

TUMBLE DRYER 18-36

SERVICE AND GUARANTEE 39

INDEX 40

SAFETY 3

Transit screws

General

Child lock on Start/Stop button

Door

Overfill cut-out

Packaging

Transport/Winter storage

Scrapping

PARTS OF THE WASHING MACHINE 4

TECHNICAL INFORMATION 5

Technical data

PROGRAMME CYCLES 6-7

MECHANICAL INSTALLATION 8-10

Transit screws

Positioning the washing machine

Adjusting the feet

Connecting to water supply

Water intake – mixed or cold water

Connecting to drain

ELECTRICAL INSTALLATION 11

Electrical installation

Connecting to coin mechanism

CONTENTS – WASHING MACHINE

CHANGING SETTINGS 12-13

Language

Locking the programme

Wash temperature, C or F

Changing preset wash temperature

Child lock

MAINTENANCE 14-15

Emptying/cleaning trap and drain pump

Inspection holes under drum paddles

Cleaning the detergent drawer

Cleaning the outside of the machine

In areas with hard water

TROUBLESHOOTING 16-17

Door will not open

Machine will not start

Error messages

The display is lighting when a

programme is selected, but no

characters or digits are shown

Wrong language displayed

WASHING MACHINE CONTENTS

GENERAL

• Read and keep this manual!

• Any electrical work or plumbing must be car-

ried out by qualified tradesmen.

• Remove the transit screws before you use the

machine, see Mechanical installation.

CHILD LOCK ON BUTTON

To prevent accidental button pushes on the

button you can activate the child lock

function. The button then must be held

in for three seconds to activate the machine.

DOOR

The door is opened electrically, so it cannot be

opened until the machine is connected to the

electrical supply! The door can however be ope-

ned in an emergency, see Troubleshooting.

OVERFILL CUT-OUT

If the water level in the machine rises above

normal the overfill cut-out shuts off the water

intake and starts pumping out the water. The

programme resumes when the water level has

dropped.

PACKAGING

Recycle the packaging according to recommen-

dations in your area.

TRANSPORT/WINTER STORAGE

If you intend to transport the machine or store

it over winter in unheated premises, empty the

trap and the drain pump, see the chapter on

Maintenance.

Any questions? Call service.

SCRAPPING

At the end of its life the machine must be disa-

bled before being scrapped.

Contact your local recycling centre to find

out where to dispose of it or recycle it.

The machine has been built and marked to

facilitate recycling.

SAFETY

SAFETY WASHING MACHINE

Start/Stop

P1P2P4

P5 P6P8

123

1. DETERGENT DRAWER

2. POWER SWITCH

3. PROGRAMME PANEL

4. RATING PLATE

5. DOOR-DRAIN PUMP/EMERGENCY OPEN

6. DRAIN PUMP/EMERGENCY OPEN (BEHIND

FLAP)

7. DOOR

1. DETERGENT COMPARTMENT – PRE-WASH

2. DETERGENT COMPARTMENT – MAIN WASH

3. FABRIC CONDITIONER COMPARTMENT

PARTS OF THE WASHING MACHINE

WASHING MACHINE PARTS OF THE WASHING MACHINE

TECHNICAL INFORMATION

TECHNICAL DATA

Height: 850 mm.

Width: 595 mm.

Depth: 585 mm.

Weight: 73 kg.

Drum capacity: 50 l.

Max wash load: 5.0 kg.

Spin speed: 1200 rpm.

Power rating: See rating plate.

Element power: See rating plate.

Water pressure: 0.1–1 MPa, 1–10 kp/cm2, 10–100 N/cm2.

Composition of drum and fluid container: Stainless steel.

Composition of casing: Powder-painted and hot-dip galvanized sheet

steel or stainless steel.

Installation: Static on four adjustable, rubber-covered feet.

Water supply: 1.5 m PEX hose.

Drain: 1.7 m polypropylene hose (pump) or 0.4 mm

EPDM rubber hose (valve).

TECHNICAL INFORMATION WASHING MACHINE

PROGRAMME CYCLES

WASHING MACHINE PROGRAMME CYCLES

PROGRAMME CYCLES

Your machine is equiped with EURO-, MEDICAL-, MOP or US-programmes. All versions are not

available in all countries. If you are unsure which programmes your machines has, compare the

programmes below with the enclosed washing guide or contact your dealer.

P1 Heavy wash 90°C (2)

P2 Heavy wash 80°C (2)

P3 Normal wash 60°C

P4 Normal wash 40°C

P5 Synthetic wash 40°C

P6 Super Quick wash 40°C

P7 Wool/hand wash 30°C (1)

P8 Rinse

MEDICAL

PROGRAMMES

(1) High water level and gentle motor action. (2) Cannot be interrupted.

Max .load

Pre wash

Rinse

Spin

Rinse

Spin

Rinse

Spin

Length (appr. min)

Main wash

P1 Heavy wash 90°C

P2 Normal wash 90°C

P3 Normal wash 60°C

P4 Normal wash 40°C

P5 Synthetic wash 40°C

P6 Super quick wash 40°C

P7 Wool/hand wash 30°C (1)

P8 Spin

(1) High water level and gentle motor action.

EURO

PROGRAMMES

Max .load

Pre wash

Rinse

Spin

Rinse

Spin

Rinse

Spin

Length (appr. min)

Main wash

PROGRAMME CYCLES WASHING MACHINE

P1 Heavy wash 60°C

P2 Normal wash 60°C

P3 Normal wash 40°C

P4 Light wash 40°C

P5 Super quick wash (2)

P6 Permanent press 40°C

P7 Delicate 30°C

P8 Rinse

PROGRAMMES

(1) High water level and gentle motor action. (2) Temperature equal to temperature of incoming water.

P1 Heavy wash 90°C

P2 Heavy wash 60°C

P3 Normal wash 90°C

P4 Normal wash 60°C

P5 Normal wash 40°C

P6 Synthetic wash 40°C

P7 Wool/handwash 30°C (1)

P8 Rinse

Max .load

Pre wash

Rinse

Spin

Rinse

Spin

Rinse

Spin

Length (appr. min)

MOP

PROGRAMMES

(1) High water level and gentle motor action.

1/1 (5,0 kg)

1/2 (2,5 kg)

1/3 (1,7 kg)

Main wash

Rinse

Short spin (3 min)

Long spin (6 min)

EXPLANATIONS

Max .load

Pre wash

Rinse

Spin

Rinse

Spin

Rinse

Spin

Length (appr. min)

Main wash

WASHING MACHINE MECHANICAL INSTALLATION

MECHANICAL INSTALLATION

TRANSIT SCREWS

Before the machine can be used the three trans-

it screws must be removed as described below.

Each transit screw has a washer and a rubber

spacer. The rubber

spacers are used to

protect the screw ho-

les after the screws

have been removed.

1. First unscrew the screw and remove the was-

her.

2. Then pull out the rubber spacer.

3. Finally, refit the rubber spacers to cover the

transit holes.

Start/Stop

595 mm

585 mm

850 mm

min 600 mm

min 850 mm

POSITIONING THE WASHING MACHINE

The washing machine can be built-in or free-

standing. It should be positioned so that there

is an electrical socket within easy reach.

A. Built-in

The washing machine can be built in under a

worktop with a working height of 850–900 mm.

Leave a 5 mm gap around the machine. This

also applies between the rear edge of the top

the machine and the wall behind.

B. Free-standing

The washing machine can be placed alongside

or underneath the tumble dryer.

The machine can be anchored to the floor, see

enclosed bag containing instructions and parts.

ADJUSTING THE FEET

Adjust the feet so that the machine is level and

steady on the floor.

Tighten the lock-

ing nuts.

CONNECTING TO WATER SUPPLY

The machine should be connected to the water

supply by someone who has the necessary skill.

The machine is connected using the supplied

inlet hose.

NOTE!

It is important that you use the inlet hose that

is supplied, not an old hose.

The water pressure must be 0.1–1 MPa

(about 1–10 kp/cm2; 10–100 N/cm2).

The water supply pipe must be fitted with a

shut-off valve.

If the supply pipe has just been installed we

recommend that it is flushed out thoroughly

Locking nut

MECHANICAL INSTALLATION WASHING MACHINE

Table of contents

Other Primus Washer manuals

Primus

Primus F22 User manual

Primus

Primus F 22-55 User manual

Primus

Primus C 6 User manual

Primus

Primus FS 6-16 Manual

Primus

Primus R6 User manual

Primus

Primus MKIIA-LC Installation manual

Primus

Primus MB90 Manual

Primus

Primus FS 6-16 User manual

Primus

Primus FX80 Mounting instructions

Primus

Primus FS16 Original operating manual

Primus

Primus C 8 Manual

Primus

Primus 6kg Manual

Primus

Primus F22 User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide