PowerTrainer PT-333 User manual
TREADMILL PT-333
OWNER’S MANUAL
Powertrainer
20155 Ellipse
Foothill Ranch, CA 92610
Tel: (886) 325-2339 Revision Date: 10/20/2004
2
TABLE OF CONTENT
Content Overview Page
PRODUCT OVERVIEW ......................................................2
IMPORTANT SAFETY INSTRUCTIONS...........................3-4
PRE-ASSEMBLY CHECK LIST..........................................5
ASSEMBLY INSTRUCTIONS ............................................6-9
OPERATION OF POWERTRAINER PT-333......................10-13
PROGRAM PROFILE..........................................................14-15
EXPLODED VIEW PT-333..................................................16
PART LIST PT-333 ...............................................................17
SAFETY PRECAUTIONS & MAINTENANCE .................18
TROUBLESHOOTING........................................................20-21
WARRANTY ........................................................................22
3
PRODUCTOVERVIEW
4
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should be followed, including the following:
Please read, understand, and carefully follow all warnings, instruction, and procedures on the treadmill
and in the owners/users manual before using this treadmill.
– To reduce the risk of electric shock:
Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
– To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Inspect the treadmill for incorrect, worn, or loose components and correct, replace, or tighten any
component prior to treadmill use.
2. An appliance should never be left unattended when plugged in. Unplug from outlet when not in
use, and before putting on or taking off parts.
3. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or
disabled persons.
4. Use this appliance only for its intended use as described in this manual.Do not use any attachment
not recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged. Return the appliance to a service center for examination and repair.
6. Keep the cord away from heated surfaces.
7. Never drop or insert any object into any opening.
8. Do not use outdoors.
9. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
10. To disconnect, turn all controls to the off position, then remove plug from outlet.
11. Connect this appliance to a properly grounded outlet only.
DANGER!
WARNING!
DANGER!
Indicates an imminently hazardous situation which if not avoided,willresult in death orserious injury.
WARNING
!
Indicates a potentially hazardous situation, which ifnot avoided,could result in death orserious injury.
CAUTION!
Indicates a potentially hazardous situation, which ifnot avoided,may result in minorormoderate injury.
5
IMPORTANT SAFETY INSTRUCTIONS (CONT’D)
12. This appliance is intended for household use only.
13. Please obtain a medical exam before beginning any exercise program, If at any time you feel faint,
dizzy or experience pain stop and consult your physician.
14. Always keep children away from exercise equipment.
15. Do not wear loose or dangling clothing while using your treadmill.
16. Care should be used when mounting or dismounting your treadmill.
17. Always disconnect all power to the treadmill before servicing or cleaning.
18. Read, understand, and test the emergency stop before using your treadmill
19. Do not operate your treadmill in damp or wet conditions.
20. Do not exceed the maximum user weight to maintain safe use of your treadmill.
SAVE THESE INSTRUCTIONS
6
IMPORTANT SAFETY INSTRUCTIONS (CONT’D)
GROUNDING INSTRUCTIONS
This product must be grounded. If it malfunctions or breaks down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord
which has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
– Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the
product is product is properly grounded. Do not modify the plug provided with the product - if it does
not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug
illustrated in the figure. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.
Grounding methods
GROUNDING
PIN
GROUNDED
OUTLET
DANGER!
7
MOTORIZED TREADMILL PRE-ASSEMBLY CHECK LIST
ITEM Description Qty ITEM Description Qty
A Frame 1 K Water Holder 1
B Handrail(L) 1 a Screws M8xP1.25x15 8
C Handrail(R) 1 b Screws M5xP0.8x10 4
D Computer Console 1 c Screws K-299 4
E Upright(L) 1 d
Screws ∅5x25 2
F Upright(R) 1 e 5mm Wrench 1
G Cover(L) 1 f 6mm Wrench 1
H Cover(R) 1 g Safety Key/Clip 1
I Handrail Upper Cover(L) 1 h Power Cord 1
J Handrail Upper Cover(R) 1 i Silicon Oil 1
8
ASSEMBLY INSTRUCTION
Please read, understand, and follow all of the safety precautions along with the assembly instructions for
safe and easy assembly of your treadmill.
A minimum of two people are required
to assemble this treadmill. Also, read
and understand all instructions
thoroughly before assembling the
treadmill.
Failure to do so could result in injury.
1. First, pull the control cord bottom from the
right upright insert (F) and connect it with
the cord connector from the right upright
frame base. Secure the left and right upright
inserts onto the upright frame bases with 8
(a) bolts.
2. Insert the Bracket (L) between the uprights
(E) and (F) and secure with 4 screws (k).
CAUTION!
9
ASSEMBLY INSTRUCTION (CONT’D)
3. Press the left and right covers (G and H) into
position and secure them with 4 (b) bolts as
shown.
4. Insert left and right handrails (B and C) onto
computer console (D) as shown in arrows,
make sure that holes are line up with each other.
10
ASSEMBLY INSTRUCTION (CONT’D)
5. Raise the assembled computer console,
connect the control wire (upper) with the
control wire (bottom). Then place the console
on the upper portions of the uprights as
shown.
Note：Confirm that no cables are
pinched while raising the unit.
Then, tighten the console and the
uprights with 4 of K-299 screws (c).
6. Then, press left screw cover and right screw
cover (I and J) into place and secure them
with 2 (d) screws.
7. Finally Screw in the bottle holder into the
consoledisplay
Assembly is now completed
Table of contents
Popular Treadmill manuals by other brands
Smooth Fitness
Smooth Fitness EVO 3i user manual
NordicTrack
NordicTrack NETL81810.0 user manual
Schwinn
Schwinn 830/Journey 8.0 Assembly manual / owner's manual
Keys Fitness
Keys Fitness HealthTrainer HT-740T owner's manual
Spirit
Spirit XT8 Service manual
NordicTrack
NordicTrack T 14.0 Treadmill Manuel de l'utilisateur