PowerPac PPIN1129 User manual

Model: PPIN1129

220746-12

CERAMIC

SOLE-PLATE

TEMPERATURE

CONTROL

1.4KG

LIST OF COMPONENTS

360 Swivel Cord

Indicator Light

Handle

Steam Button

Temperature Regulating Knob

10.

Water Filler

Button groove

Soleplate (Non-stick)

Water Tank (+ Window) (180 ml)

Heel Rest

PARTS & DESCRIPTION

7 8 9 10

ATTENTION :

Read this booklet carefully as it contains important instructions for a safe installation, use and

maintenance.

Important instructions to be kept for future reference.

The following basic precautions should always be followed when using electrical appliances:

10.

11.

12.

Read all instructions before using the appliance.

The Appliance

This appliance must be used only for the purpose it was expressly designed – for ironing

fabrics on an ironing board; any use NOT complying with the instructions contained in the

manual is considered inappropriate and dangerous. The manufacturer is NOT responsible for

possible damages caused by the inappropriate and/or unreasonable use.

The Water Tank in the appliance is designed for heating water only. DO NOT put other liquids

into it. Different liquids have different boiling points, with volatile liquids having boiling points

lower than 100°C, the boiling point of water.

The installation/assembly of the appliance will be made in accordance with the indications of

the manufacturer. A wrong procedure may cause damages to persons, animals or objects, for

which the manufacturer cannot be considered responsible.

Before use, check the integrity of the appliance and power cable. DO NOT operate the

appliance when its housing is damaged or if the appliance have has been dropped. In case you

are not sure, contact a qualified person. If the power cable is damaged, it must be replaced by

the manufacturer or its service agent or a qualified technician in order to avoid a shock hazard.

Before powering the appliance make sure the rating (voltage and frequency) corresponding

to the grid and the socket is suitable for the plug of the appliance, and that the wall socket is

properly grounded.

Avoid the use of adapters and/or extension cables; if their use is absolutely necessary, use only

materials in compliance with the current safety regulations and according to the electrical

parameters of the adapters.

The appliance must NOT be switched on using external timers and/or other remote control

appliances which are not specified in this manual.

Only use original components & accessories provided by the manufacturer. Any non-original

component or accessory NOT recommended by the manufacturer may cause injuries to

persons or damage to the appliance.

The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out of the reach

of children or disabled persons since they represent potential sources of danger.

Location

This appliance is NOT suitable to be used or stored near heat sources (open flame, ovens,

heaters, stoves, etc.) and/or in an explosive environment (in the presence of flammable

substances such as gas, vapour, mist or dust, in atmospheric conditions when, after ignition,

the combustion is spread in the air). Items containing these substances should never be

placed in the appliance, and never be used to clean the appliance in order to avert the risk of

fire or explosion.

The appliance should be placed on an ironing board, which is covered by fabric made

specifically for that purpose. When using the appliance, the surface that the appliance is

placed upon as well the surface immediately above (e.g. a wooden cabinet above the

appliance), may become very hot. The appliance should NOT be placed on a surface or in the

vicinity of objects which can be damaged by heat, such as carpets or plastics. DO NOT locate

multiple portable socket outlets or power supplies in the vicinity of the appliance.

WARNINGS

13.

14.

15.

16.

17.

18.

Avoid placing the power cable on abrasive or sharp surfaces or in positions where it can be

damaged easily. Avoid placing heavy objects on the cable. Be especially vigilant in preventing

the hot Soleplate from coming to rest on the power cable. The cable must NOT be placed

under carpets, or covered with throw rugs, runners or similar. Arrange the cable away from

the high traffic area, and where it will NOT be tripped over. DO NOT pull or carry the appliance

by the cable.

DO NOT use or store the appliance outdoors. Store and use the appliance only indoors, or in

any case, protected from weathering such as rain, direct radiation of the sun and dust.

Operation

If you are using the appliance for the first time, you should:

DO NOT:

•

During operation, DO NOT touch the appliance with wet body parts, and it is recommended

to have between you and the standing surface, an isolating element (for example, wearing

shoes with rubber soles).

During the period of operation, high temperature steam may escape from the container.

To avoid scalding:

•

DO NOT soak the appliance in water or other liquids, wash it under the tap, or let any liquid

flow into the internal casing of the appliance to prevent electric shock. In case of accidental

fall in water, DO NOT try to take it out, but first of all switch the appliance off.

Clean the exterior parts of the appliance thoroughly with a damp cloth. DO NOT use metal

scouring pads.

Place and use the appliance upright on a horizontal, stable, dry and heat-resistant surface.

Damage to the appliance may occur if it is placed on an incline or decline.

(First use)

• Clean the iron by ironing an old rag, as oil or grease from the manufacture and assembly

of the components may be present, which could cause discolouration of fabric. The oil or

grease should be burnt off after a short while, and some smoke may be emitted.

This is normal.

• Fill the Water Tank with water before using the Spraying button & the Burst Steam button.

Ensure that the exterior of the iron is completely dry before use.

• Make sure to remove any label or protective sheet which may prevent its proper functioning.

cover the appliance during functioning;

obstruct totally nor partially the Soleplate;

insert objects or body parts inside the protection cover of the appliance;

place the appliance and heat it by any other means, e.g. in a microwave, oven or on a frying

pan filled with water and placed directly on a gas stove, as the plastic components can be

deformed as a result;

leave the appliance unsupervised during operation.

ensure that the iron is correctly positioned while being used;

DO NOT fill the Water Tank with hot water;

DO NOT fill water beyond the maximum volume indicated;

DO NOT iron or steam fabrics while they are still attached to the body;

DO NOT touch any part of the iron except the Handle, Steam Button and Temperature

Regulating Knob when the iron is hot;

note that water inside the Water Tank might be very hot during operation, and for some

time after the appliance have stopped operating;

DO NOT press the Steam Button too forcefully;

one’s hands and face should be angled away from the Water Filler & Soleplate.

19.

20.

21.

22.

23.

24.

DO NOT soak the appliance in water or other liquids, wash it under the tap, or let any liquid

flow into the internal casing of the appliance to prevent electric shock. In case of accidental

fall in water, DO NOT try to take it out, but first of all switch the appliance off.

In case of malfunction or anomaly during the functioning, switch off the appliance

immediately, turn off the power and check the cause of the anomaly, if possible, with the

support of a qualified person.

If smoke is observed coming out of the appliance, unplug the power cable immediately.

This appliance is NOT intended for commercial use but to be used in households and similar

applications, such as:

• Staff kitchen areas in shops, offices and other working environments;

• By clients in dormitories hotels, motels and other residential environments;

• Bed and breakfast type environment.

This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way and

understand the hazards involved. Children shall NOT play with the appliance. Cleaning and

user maintenance shall NOT be made by children unless they are older than 8 and supervised.

Keep the appliance and its cable out of reach of children less than 8 years old.

Save these instructions.

Sort your clothes according to the nature of the fabrics. Chemical fibres which are synthetics

should not encounter high temperatures while Natural fibres which includes (silk, wool, cotton

and linen) can withstand progressively higher temperatures.

How to fill the iron with water

Using as a DRY IRON

Switch off the iron and unplug the power cable from the electric mains.

Set the Temperature Regulating Knob to the ‘0’ position and the Steam Button locked in the

DOWN position.

Position the iron vertically resting on the Heel Rest on a horizontal, stable and heat-resistant

surface. Use a clean measuring cup and pour water into the Water Filler to the‘MAX’ line of

the Water Tank.

DO NOT overfill or use water containing additives, scented water, mineral water, etc. Use only

tap water or distilled water.

The water level can be observed through the transparent part of the Water Tank. During the

course of operation, refill the tank (following the procedure outlined in steps 1 – 3) if the

water level becomes low.

Set the Temperature Regulating Knob to 0 and the Steam Button locked in the DOWN position.

Position the iron vertically resting on the Heel Rest on a horizontal, stable and heat-resistant

surface.

Plug the power cable into the electric socket and switch it ON.

Set the Temperature Regulating Knob to the appropriate setting (up to 4) for your fabric. The

Indicator Light comes on. The process of preheating the iron has commenced.

Wait for the Indicator Light to go off, indicating that the selected temperature has been

reached and you can start ironing fabrics which require low temperature ironing. The light

will cycle on an off during ironing.

When you are ready to proceed with fabrics which require progressively higher temperatures,

select a higher temperature setting, position the iron vertically 90 The Indicator Light comes

on. Wait for the Indicator Light to go off, and you can start ironing fabrics which require

higher temperature ironing.

Temperature Regulating dial to adjust temperature according to fabric

HOW TO USE

Temperature Fabric

Acrylic, Spandex (Lycra or Elastane), Lyocell1

Acetate, Nylon, Microfibre,2

Cashmere, Lace, Polyester, Satin, Silk3

Polyester, Synthetic blends (e.g. Cotton Blends),

Viscose or Rayon

Wool5

Cotton6

Linen, Corduroy7

STEAM FUNCTION

0 1

ACRYLIC

NYLON

SILK

POLYESTER

WOOL

COTTON

LINEN

Using as a STEAM IRON

Always iron clothes which require lower temperatures first, and work your way to higher

temperatures. Never the other way around as thermally-sensitive fabrics will be ruined by

higher temperatures. In addition, the iron gets hot faster than it cools.

Ensure that the water is filled to the ‘MAX’line of the Water Tank.

Set the Temperature Regulating Knob to the ‘0’ position.

Position the iron vertically resting on the Heel Rest on a horizontal, stable and heat-resistant

surface.

Plug the power cable into the electric socket and switch it ON.

Set the Temperature Regulating Knob between 5 – 7 and the Steam Button unlocked in the

UP position. The Indicator Light comes on. The process of preheating the iron has commenced.

Wait for the Indicator Light to go off, indicating that the selected temperature has been

reached and you can start ironing fabrics which require lower temperature ironing. The light

will cycle on an off during ironing.

When you are ready to proceed with fabrics which require progressively higher temperatures,

select a higher temperature setting, position the iron vertically 90 The Indicator Light comes

on. Wait for the Indicator Light to go off, and you can start ironing fabrics which require higher

temperature ironing.

Always iron clothes which require lower temperatures first, and work your way to higher

temperatures. Never the other way around as thermally-sensitive fabrics will be ruined by

higher temperatures. In addition, the iron gets hot faster than it cools.

Note: the iron gives off steam continuously only if held horizontally with the Steam Button

unlocked in the UP position. You can stop the continuous flow of steam by placing the iron in

a vertical position, by moving the control dial to 0 or having the Steam Button locked in the

DOWN position.. You can only use steam at the highest temperatures (5 – 7, otherwise water

may drip onto the plate.

Once you have finished ironing, place iron on the Heel Rest, turn temperature selector to OFF

and unplug the iron. Set the Temperature Regulating Knob to 0 and the Steam Button locked

in the DOWN position

Wait until the iron has cooled down completely.

Pour out the remaining water after use by pointing the tip of the iron downwards and

inverting the iron. DO NOT store the iron with water still inside the Water Tank.

Wipe the exterior of the iron using a soft, damp cloth or sponge. Remove stubborn spots with

a cloth moistened with mild liquid detergent. DO NOT use abrasive scouring pads or powders.

Never let steam iron cleaners come into contact with the working parts of the iron.

Soleplate: Starch and other residues may be easily removed from the Soleplate with a damp

cloth with a vinegar-water solution.

To avoid scratching the finishing, never use a metallic pad to clean the Soleplate, and never

place the iron horizontally over a rough surface.

If synthetic fabrics are ironed at too high temperatures, not only is the fabric usually ruined

but the Soleplate is often covered with the melted remains of the synthetic fabric.

The best way to remove synthetic fabric residue from the Soleplate is to heat the iron and to

iron over an old cotton rag repeatedly.

Store the iron in a vertical position.

HOW TO CLEAN

Anti-Drip Function

Below a certain temperature (Temperature setting 5 on the Temperature Regulator knob), the

anti-drip function cuts off the flow of water to the Soleplate and stops the water from dripping

out of the appliance.

Overheat Safety Protection

In the case where the installed thermostat malfunctions, the power supply will stop

automatically to prevent the steam iron from overheating. In this case, the steam iron has to be

repaired by the service point.

SAFETY FEATURES

This appliance, along with all other electronic appliances, should, when it is no longer capable of

functioning, be disposed with the least possible environmental damage according to the local

regulations in your area. In most cases you can discard the appliance at your local recycling centre.

DISPOSAL: Do not dispose this appliance as unsorted municipal waste.

Collection of such waste separately for special treatment is necessary.

Risk of child or animal entrapment

Before you discard this appliance, please remove all doors and leave the shelves inside so that

children or animals may not easily get trapped inside.

ENVIRONMENTAL TIP

Warranty Conditions

10.

This warranty provides against defective materials and manufacturing faults throughout for

two years from the date of purchase of the appliance. The warranty on the Compressor is 10

years subject to the same conditions as above.

This warranty also does not cover normal wear and tear, replacement of consumable

materials and accessories, and the cost of maintenance of the appliance.

This warranty does not cover the repair or replacement of part/s damaged by misuse,

accidents, negligence, alterations, or modifications in any way, or repairs done by any repair

organisation without the prior consent of PowerPac Electrical Pte Ltd.

Repair and service are to be performed at: 5 Changi South Lane #03-01 Singapore 486045.

A transport fee will be charged for personal doorstep service.

The original purchaser of the appliance must furnish proof of purchase to our Service Centre

with the email or number as registered during submission of warranty when this appliance is

sent for repair/service. Failure to do so may delay the receipt of said repair/service by the

customer.

Under no circumstances whatsoever shall the serial number be erased, defaced or altered by

the customer and/or his representatives, or the dealer and/or his agents. Failure to ensure

this shall invalidate the warranty.

This warranty is deemed to be void if the defect is cause by the attack of household pests,

fire, lightning, natural disasters, pollution, abnormal voltage or the usage of generators.

This warranty is valid in Singapore only.

This warranty will be honoured subject to the customer’s registration of the warranty

inclusive of original invoice or valid purchase receipt. Failure to present these documents will

result in denial of service. However, if the customer still requests that the defective appliance

be repaired, PowerPac Electrical Pte Ltd may, at its discretion, repair the appliance but impose

a labour charge, as well as the costs of the replacement parts, to be borne solely by the

customer.

Please refer to the attached picture for the location of one of our appliance’s serial number,

as an example.

Please complete the on-line registration warranty form available

on our website. There is no further requirement to send us any

hard copy as part of our efforts to save the environment.

In accordance with the terms and conditions of this limited

warranty as stated above, PowerPac Electrical Pte Ltd, at its

expense shall provide free services for the appliance within the

warranty period from its date of purchase from our Authorised

dealers.

WARRANTY

E-Register scan

PPIN1129

MODEL

220-240V ~ 50/60Hz

VOLTAGE

1200W

POWER

SPECIFICATION

Table of contents

Other PowerPac Iron manuals

PowerPac

PowerPac PPIN1200 User manual

Popular Iron manuals by other brands

Clatronic

Clatronic DB 3703 instruction manual

TEFAL

TEFAL FV4093Z0 manual

Gorenje

Gorenje SIH 2200 BS instruction manual

Philips

Philips GC6012 Service manual

Bosch

Bosch 2 Series operating instructions

Riffel

Riffel Catena KB-819 instruction manual

Texi

Texi Hestia Instructions for use

Maxwell

Maxwell MW-3010 Manual instruction

TREVIDEA

TREVIDEA Girmi ST60 user manual

Philips

Philips HI5914/30 quick start guide

Primula

Primula Vapormat instruction manual

Magio

Magio MG-541 manual

Scarlett

Scarlett SC-1334S instruction manual

Bosch

Bosch Sensixx B22L manual

Philips

Philips GC651 Specifications

Vitek

Vitek VT-1247 VT Manual instruction

Cleanmaxx

Cleanmaxx 3397 instruction manual

Philips

Philips GC800 user manual