Power Fist 9103268 User manual
V1.0 9103268
Please read and understand all instructions before use. Retain this manual for
future reference.
This page is intentionally left blank.
SPECIFICATIONS
Voltage Rating 3.7V DC
Wattage 5 Watts
Lamp Type LED
Lumens Rating 390 lm
Power Source Li-ion Battery
Run Time 3.5 hours
Rated Life 30,000 Hours
Base Type Magnetic
Housing Material Aluminum
Output Modes High/Low/Top/O
Switch Type Push Button
Colour/Finish Black
INTRODUCTION
Illuminate workspaces in the garage, shop or on the jobsite with this portable
LED worklight. Energy-ecient LEDs save money on power bills. The hinged
LED panel allows a range of angles for better illuminate of the workspace.
ON/OFF Button for easy operation. Lightweight yet durable aluminum housing.
SAFETY
WARNING! Read and understand all instructions before using this tool.
The operator must follow basic precautions to reduce the risk of
personal injury and/or damage to the equipment.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A
notice is an alert that there is a possibility of property damage, injury or death
if certain instructions are not followed.
DANGER! This notice indicates an immediate and specic hazard that will result in
severe personal injury or death if the proper precautions are not taken.
WARNING! This notice indicates a specic hazard or unsafe practice that could result in
a serious injury if the proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that may result in
minor or moderate injury if proper practices are not taken.
NOTICE! This notice indicates that a specic hazard or unsafe practice will result in
equipment or property damage, but not personal injury.
V1.0 LED SLIM RECHARGEABLE WORK LIGHT 9103268
Page 3 www.princessauto.com / 1-800-665-8685
WORK AREA
1. Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away from
the work area.
3. Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.
4. Do not install or use in the presence of ammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1. Do not operate any tool when tired or under the inuence of drugs,
alcohol or medications.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suer serious personal injury.
1. Use the correct tool for the job. This tool was designed for a specic
function. Do not modify or alter this tool or use it for an unintended
purpose.
2. Do not stare into the light. The light may cause irritation and temporarily
impair your vision.
3. Do not overcharge battery (See Care & Maintenance).
BATTERY SAFETY
WARNING! Do not charge a damaged or frozen battery. Contact your
local municipality for proper disposal procedures.
9103268 LED SLIM RECHARGEABLE WORK LIGHT V1.0
www.princessauto.com / 1-800-665-8685 Page 4
Consult the Safety Data Sheet (SDS) for your battery before use or
maintenance.
1. Do not expose the battery to heat or throw it in a re. The contents are
ammable and the battery may explode. Remove any source of ignition
such as an open ame or a tool like a heater from the area.
2. Do not inhale smoke issuing from a burning battery, as it is toxic.
3. Do not disassemble or crush the battery as the contents are corrosive
and ammable. Exposure may cause an injury. There is a risk of escaping
hazardous vapors. These vapors can irritate the respiratory track. Always
ensure proper ventilation and immediately consult a doctor, if you feel
unwell.
4. Even a discharged battery may still carry a charge. To prevent a shock,
place battery terminal caps or covers over the terminal to prevent
accidental contact.
5. Leaking battery uid can cause irritation of the skin or burns. If contact
should occur, ush immediately with water. In case of accidental contact
with the eyes, seek medical aid.
6. Do not disconnect from the power source in place of using the ON/OFF
switch on the tool. This can lead to an accidental startup when the tool is
connected to the power supply.
7. Do not allow a rechargeable battery to fully discharge. This will damage
the battery. Recharge the battery as soon as possible.
8. Do not store the battery completely discharged. Charge it fully before
storing. Recharge occasionally if storing for a long time.
9. Discontinue using or charging a li-ion battery if it changes shape or is
abnormally hot. The battery may leak or ignite. Move the battery to a re
proof location and observe for 15 minutes. Safely dispose of the battery.
POWER TOOL PRECAUTIONS
1. Do not use any power tool with a malfunctioning power switch or control.
A power tool that fails to respond to the controls is dangerous and can
cause an injury. A qualied technician must repair and verify the power
tool is operating correctly, before it can be used.
2. Shut the power o and disconnect the work light from the power supply
(if possible) before making any adjustments, cleaning, servicing or when
storing. Such preventive safety measures reduce the risk of starting the
tool accidentally.
V1.0 LED SLIM RECHARGEABLE WORK LIGHT 9103268
Page 5 www.princessauto.com / 1-800-665-8685
ELECTRICAL SAFETY
WARNING! Do not touch or handle a live tool with any part of your body
that is wet or damp. Wet skin reduces resistance to electrical current,
increasing the danger of a serious or fatal shock.
1. Do not alter any parts of the tool or accessories. All parts and accessories
are designed with built-in safety features that may be compromised if
altered.
2. Protect yourself against electric shocks when working on electrical
equipment. Avoid body contact with grounded surfaces. There is an
increased chance of electrical shock if your body is grounded.
3. Do not expose the work light to rain, snow, frost or any other damp or wet
conditions. Water entering a tool will increase the risk of electric shock.
4. Make certain the power source conforms to requirements of your
equipment (see Specications).
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in a
malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
CONTENTS
Make sure that all items in the contents are included.
• Work Light • USB C Charging Cable
9103268 LED SLIM RECHARGEABLE WORK LIGHT V1.0
www.princessauto.com / 1-800-665-8685 Page 6
IDENTIFICATION KEY
A. LED
B. LED Panel
C. Hinge
D. ON/OFF Button
E. Magnetic Base
FIGURE 1.
OPERATIONS
1. The battery is not fully charged out of the carton. Charge the battery
before rst use.
2. Position the work light in a location that will illuminate your workspace.
3. Place the work light on a at surface.
4. Adjust the LED panel on the hinge. It has a 90º range.
5. The ON/OFF button has three illumination settings that change with each
press of the button. The rst button press turns the light on. Press again
for a dimmer light. Press a third time to shut o the main light and turn
on the light at the end of the LED bar. Press again to turn the light o.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is ecient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
3. Keep the tool handles or gripping surfaces clean and dry.
4. Maintain the tool’s labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualied service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
V1.0 LED SLIM RECHARGEABLE WORK LIGHT 9103268
Page 7 www.princessauto.com / 1-800-665-8685
RECHARGING THE WORK LIGHT
1. Check the indicator lights to determine if you need to recharge the
battery.
2. Lift the waterproof cover.
3. Insert the charging cable's USB-C plug into the USC-C port.
4. Plug the USB plug into a power supply's USB port.
5. The glowing LEDs will indicate the battery's charge level.
6. Remove the charge cable and close the waterproof cover once the battery
is fully charged.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or by-laws for
electronic devices, batteries, oil or other toxic liquids.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does not function
properly or parts are missing. If unable to do so, have a qualied technician
service the tool.
9103268 LED SLIM RECHARGEABLE WORK LIGHT V1.0
www.princessauto.com / 1-800-665-8685 Page 8
V1,0 9103268
Vous devez lire et comprendre toutes les instructions avant d'utiliser l'appareil.
Conservez ce manuel afin de pouvoir le consulter plus tard.
Cette page a été laissée blanche intentionnellement.
Table of contents
Languages:
Other Power Fist Work Light manuals
Popular Work Light manuals by other brands
PowerSmith
PowerSmith PWLD080T Operator's manual
MaxLite
MaxLite 73683 installation instructions
Heitronic
Heitronic Trend 27867 Installation and operating instructions
Monzana
Monzana Gore MZCL10 manual
EINHELL
EINHELL TE-CL 18/2000 LiAC Original operating instructions
Bayco
Bayco NIGHTSTICK Dual-Light Xtreme Lumens... instruction manual