Polygroup TG60M3J72D00 User manual
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set® technology, allowing you to set
up and light up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your
new tree.
TREE ASSEMBLY INSTRUCTIONS
3. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top.Start with the bottom section and remove protective cap before inserting into the
assembled stand.Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.
7. Insert green label extension cord into adapter and adapter insert into the wall outlet. (See Fig. B), your entire tree should now
be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the
plugs or replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one
to the right, one to the left and one at the center of the main stem. (See Fig. C)
Top view Side view
Fig. C
MODEL #: TG60M3J72D00
Fig. B - Tree and Light Assembly
Tree top
Section 1
Fig. A - Tree Stand Assembly
Unfold the legs and lay the
stand in a flat area.Then slide
the locking disc downward and
snap into place.
1
Control box
Adapter
To Be Plugged
Into Wall
Outlet
Insert Green Label
Extension Cord
into Adapter
Do Not Tamper
Internal Parts
Open the
protective
cap
NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR 1-888-919-0070
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120VAC, 60Hz, 0.16A
Output: 29V DC 0.28A
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to
fill any gaps.Your Christmas tree is now complete and ready to be decorated.
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected and power adapter is plugged into the wall outlet.
2.Turn the poles gently to make sure pole to sections pole are connected properly.
3. Check for loose connection between light string plugs and extension cords.
4. Please check for loose, broken or missing light bulbs and replace as needed.
Loose Hinge Pin
1. Extra hinge pins are included for repairs, if needed. Place the branch
into the slot of the bracket.
2. Insert a new hinge pin through the hole and secure using the retainer
washer. (See Fig. E)
Fig. D
1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section
below and fold all branches upwards toward the pole.
3. Continue by gently lifting each section straight up straight up from the section below and
fold all branches upwards toward the pole until the bottom section is removed from the
tree stand. Cover the protective cap on the poles to avoid damaging the
internal parts. (See Fig. D)
4. Carefully place all tree sections into shipping box and tape it shut.
5.When not in use, please store your tree in a cool, dry place away from
sunlight. Exposing your tree to excessive heat or humidity may damage your tree.
6. Keep out of reach of pets and children.
STORAGE INSTRUCTIONS
TROUBLESHOOTING TIPS
Each tree includes additional hinge pins/washers, and for pre-lit trees spare bulbs are also included.If extra parts are needed,please
contact our customer service center.
SPARE PARTS
Fig. E
2
Press the selector button on the “Dual Color Light Controller” or “Remote Controller”
to select among: (1) CLEAR - MULTI: FADING (2) CLEAR: FADING
(3) CLEAR - MULTI: ALTERNATING (4) CLEAR: STEADY
(5) CLEAR - MULTI: SLOW FADING (6) MULTI: STEADY
(7) MULTI: FADING (8) COMBINATION
DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL
Light
Controller
Selector
Button
Remote
Controller
Insulation Tab
REMOTE CONTROL INSTRUCTIONS
1. Remove the insultation tab.
2. Press the button to select from different light functions (see DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL).
WARNING
1. DISPOSE USED BATTERY PROPERLY. OBSERVE LOCAL REGULATIONS REGARDING DISPOSAL OF HAZARDOUS WASTE.
2. ENSURE THE BATTERIES ARE INSTALLED CORRECTLY WITH REGARD TO POLARITY (+ AND -).
3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.
Ingestion of such batteries has been known to cause death.
4. This product contains a lithium battery which if swallowed has been known to cause death.
5. DO NOT EXPOSE LIGHT SET TO MOISTURE.
6. REMOVE BATTERIES WHEN NOT USED FOR AN EXTENDED PERIOD OF TIME, OR WHEN DEPLETED.
7. CLEAN THE BATTERY CONTACTS PRIOR TO BATTERY INSTALLATION.
8. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed.
9. Dispose of used batteries properly by following directions on batteries.
10. Use only CR2032 batteries for the remote controller.
11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
Lamp Replacement
Step 1.
Unplug from power source, by pulling out the adapter itself - do not pull on the power cord.
(For reference only)
Step 3. Replace with a new spare
LED lamp (included).
Step 2. Lift up the lamp lock tab,
and pull the bulb and its
plastic base straight out
from the lampholder.
3
2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed
with the correct polarity (+ and -).
3. Retighten the screw to close and secure the battery cover.
Cover
Battery
CR2032
BATTERY REPLACEMENT
1. Loosen the screw of the battery cover with a screwdriver (not included).
CAUTION:
1.To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this product;
b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and
c) Do not mount or support strings in a manner that can cut or damage wire insulation.
2. Use only the adaptor supplied with this product. Using a different adaptor will damage the lights and may cause fire, or
electrical shock hazards.
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at 1-888-919-0070
or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.
Proof of purchase is required for warranty.
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.
Customer Name:
Address(No P.O. Boxes):
City & State:
Zip Code:
Day Phone:
Date Purchased:
Tree ID#:
Tree UPC#:
Store Purchased:
Specify Problem:
4
Other Polygroup Artificial Pine Tree manuals
Polygroup
Polygroup TV70M5417C01 User manual
Polygroup
Polygroup TG90M2S85C06 User manual
Polygroup
Polygroup TG76M3O06C00 User manual
Polygroup
Polygroup Home Heritage TG70M3W92D00 User manual
Polygroup
Polygroup TG40DY281C02 User manual
Polygroup
Polygroup TG76GH033X02 User manual
Polygroup
Polygroup TP30M2W72C00 User manual
Polygroup
Polygroup TG4000FNIC12 User manual
Polygroup
Polygroup TV70M2389C23 User manual
Polygroup
Polygroup Hallmark TG76M4F47L01 User manual
Polygroup
Polygroup Ashland TG76M4G64D02 User manual
Polygroup
Polygroup TGC0M3P07C00 User manual
Polygroup
Polygroup TG76M3K79D09 User manual
Polygroup
Polygroup TG70P3D94D00 User manual
Polygroup
Polygroup TG76M2I41L01 User manual
Polygroup
Polygroup TG76M4B91D00 User manual
Polygroup
Polygroup TG76M4H39L00 User manual
Polygroup
Polygroup TG7600NVQC26 User manual
Polygroup
Polygroup TV90M2U56C00 User manual
Polygroup
Polygroup AR-P18002 User manual
Popular Artificial Pine Tree manuals by other brands
Trim a Home
Trim a Home TY-S6-250L owner's manual
Sears
Sears Donner & Blitzen M44814 owner's manual
BETHLEHEM LIGHTING
BETHLEHEM LIGHTING 6.5’ Tinsel Tree instructions
Home Accents Holiday
Home Accents Holiday TG76P3D93L08 manual
Costway
Costway CM23595US user manual
Home Accents Holiday
Home Accents Holiday TG76P4C15D03 Assembly instructions
Home Accents Holiday
Home Accents Holiday 1001540584 manual
Home Accents Holiday
Home Accents Holiday TG90P3F28D00 manual
Williams-Sonoma
Williams-Sonoma TG46P4368L01 Assembly instructions
Trim a Home
Trim a Home 7.5 ft. Berkshire Fir Tree owner's manual
Home Accents Holiday
Home Accents Holiday 1004363936 manual
Polytree
Polytree TG66EH148C17 Assembly instructions