Polygroup TG46M2251D00 User manual

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V AC, 60Hz, 0.16A

Output: 29V DC, 0.28A

Fig. B - Tree and Light Assembly

Tree top

Section 1

Adapter

To Be Plugged

Into Wall

Outlet

Insert Green

Label Extension

Cord into Adapter

Control box

Do Not Tamper

Internal Parts

Open the

protective

cap

Fig. A - Tree Stand Assembly

Unfold the legs and lay the

stand in a flat area.Then slide

the locking disc downward and

snap into place.

MODEL #: TG46M2251D00 SKU: 088-575

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®! This tree comes with Quick Set® technology-Set up and light

up your tree in less than 10 minutes! Carefully follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Fig. C

Side view

Top view

3. Please identify all sections before assembling.

4. Assemble the tree from bottom to tree top. Start with the bottom section and remove the protective cap before inserting into the assembled

stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of branch hinges.

7. Just plug the adapter (connecting with the tree power cord) into the wall outlet (See Fig. B), your entire tree should now be lit. If some

bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in order to

maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the right,

one to the left and one at the center of the main stem. (See Fig. C)

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. Continue by gently lifting straight up each section(s) from the section

below and fold all branches toward the pole until the bottom section

is removed from the tree stand. Cover the protective cap on the poles

to avoid damaging the internal parts. (See Fig. D)

4. Carefully place all tree sections into shipping box and tape it shut.

5.When not in use, please store your tree in a cool, dry place away from sunlight.

Exposing your tree toexcessive heat or humidity may damage your tree.

6. Keep out of reach of pets and children.

Fig. D

Fig. E

STORAGE INSTRUCTIONS

TROUBLESHOOTING TIPS

This tree includes hinge pins/washers and spare bulbs.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected and adapter is plugged into the wall outlet.

2.Turning the poles gently to make sure pole to pole are connected into place.

3. Check for loose connection between light string plugs and extension cords.

4. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. E)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches

to fill any gaps. Your Christmas tree is now complete and ready to be decorated.

Simply press the selector button to select from the following light functions:

(1) CLEAR - MULTI: FADING (2) CLEAR: FADING

(3) CLEAR - MULTI: ALTERNATING (4) CLEAR: STEADY

(5) CLEAR - MULTI: SLOW FADING (6) MULTI: STEADY

(7) MULTI: FADING (8) COMBINATION

DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL

Remote

Control

Light

Controller

Selector Button

Insulation Tab

REMOTE CONTROL INSTRUCTIONS

1. Remove the insultation tab of the remote control.

2. Press either selector button and wait for a second to enjoy light effects in the following sequence

(see DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL).

2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with

the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Cover

Battery

CR2032

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).

3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.

Ingestion of such batteries has been known to cause death.

4. This product contains a lithium battery which if swallowed has been known to cause death.

5. Do not expose light set to moisture.

6. Remove batteries when not used for an extended period of time, or when depleted.

7. Clean the battery contacts prior to battery installation.

8. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed.

9. Dispose of used batteries properly by following directions on batteries.

10. Use only CR2032 batteries for the remote controller.

11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

WARNING

Lamp Replacement

Step 1.

Unplug from power source, by pulling out the adapter itself - do not pull on the power cord.

(For reference only)

Step 3. Replace with a new spare

LED lamp (included).

Step 2. Lift up the lamp lock tab,

and pull the bulb and its

plastic base straight out

from the lampholder.

CAUTION:

1.To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product;

b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or

electrical shock hazards.

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase.Please contact us at 1-888-919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

CUSTOMER SERVICE FOR CHRISTMAS TREES

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

This manual suits for next models

Table of contents

Other Polygroup Artificial Pine Tree manuals

Polygroup

Polygroup TG70M3L21C03 User manual

Polygroup

Polygroup TG70P3D94D00 User manual

Polygroup

Polygroup TG76M3M75D01 User manual

Polygroup

Polygroup Corona TG50ON041P00 User manual

Polygroup

Polygroup TG76GH033X02 User manual

Polygroup

Polygroup TG76P2550C00 User manual

Polygroup

Polygroup TG66M3545X13 User manual

Polygroup

Polygroup TG76M3P51C01 User manual

Polygroup

Polygroup TG70P4842D06 User manual

Polygroup

Polygroup Home Heritage TG90M3ABAD02 User manual

Polygroup

Polygroup TG76P4371C02 User manual

Polygroup

Polygroup TV46P7001X00 User manual

Polygroup

Polygroup TG76M4A25C06 User manual

Polygroup

Polygroup TV70M2389C23 User manual

Polygroup

Polygroup TG50P4B42K05 User manual

Polygroup

Polygroup TG90P3A45S05 User manual

Polygroup

Polygroup TGA0M4865C00 User manual

Polygroup

Polygroup TG80P2762D00 User manual

Polygroup

Polygroup TG76M6010M00 User manual

Polygroup

Polygroup TG4600EHFC00 User manual

Polygroup

Polygroup TG70M2T20C00 User manual

Polygroup

Polygroup H209505 User manual

Polygroup

Polygroup TG76M2251D01 User manual

Polygroup

Polygroup Caribbean Tree User manual

Popular Artificial Pine Tree manuals by other brands

Trim a Home

Trim a Home TY-S6-250L owner's manual

Sears

Sears Donner & Blitzen M44814 owner's manual

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree instructions

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 manual

Costway

Costway CM23595US user manual

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Assembly instructions

Holiday Living

Holiday Living TV40EH339C01 manual

CASARIA

CASARIA DBGB001 instructions

Alpine

Alpine CRD100L-WT owner's manual

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 manual

CASARIA

CASARIA 104006 instructions

Alpine

Alpine CRD111S-GN owner's manual

Home Accents Holiday

Home Accents Holiday 1001540584 manual

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 manual

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Assembly instructions

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree owner's manual

Home Accents Holiday

Home Accents Holiday 1004363936 manual

Polytree

Polytree TG66EH148C17 Assembly instructions