Polygroup TG76M4E28D01 User manual

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and insert into the assembled stand. Make sure the

pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Insert green label extension cord into adapter and adapter insert into the wall outlet. (See Fig. B), your entire tree should now be lit.

If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the plugs or

replace the bad bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to

the right, one to the left and one at the center of the main stem.(See Fig. C)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any

gaps.Your Christmas tree is now complete and ready to be decorated.

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly

and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Top view Side view

Fig. C

*Electrical Rating Of Power Adapter

(For Indoor Use Only)

Input: 100V-240V, 50/60Hz, 0.35A

Output: 29V DC 0.45A

Fig. B - Tree and Light Assembly

Tree top

Section 2

Section 1

Insert Green

Label Extension

Cord into Adapter

Adapter

To Be Plugged

Into Wall

Outlet

Control box

MODEL #:TG76M4E28D01 SKU: 741-668

Fig. A - Tree Stand Assembly

Unfold the legs and lay the

stand in a flat area.Then slide

the locking disc downward and

snap into place.

Insert Red Label

Plugs Into Red

Labeled Extension Cord

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord with adapter from the wall outlet and

then disconnect light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole

in both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until

the bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or

humidity may damage your tree.

7. Keep out of reach of pets and children.

STORAGE INSTRUCTIONS

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B, make sure

the extension cord is connected with the adapter and pluged into the wall outlet. Refer to assembly guide for instructions.

2. Check for loose connection between light string plugs and extension cords.

3. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

This tree includes hinge pins/washers and spare bulbs.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

Simply press the selector button to select from the following light functions:

(1) CLEAR - MULTI: FADING (2) CLEAR: FADING (3) CLEAR - MULTI:

ALTERNATING (4) CLEAR: STEADY (5) CLEAR - MULTI: SLOW FADING

(6) MULTI: STEADY (7) MULTI: FADING (8) COMBINATION

DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL

Remote

Control Light

Controller

Selector Button

Insulation Tab

REMOTE CONTROL INSTRUCTIONS

1. Remove the insultation tab of the remote control.

2. Press either selector button and wait for a second to enjoy light effects in the following sequence

(see DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL).

2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed with

the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Cover

Battery

CR2032

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).

3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.

Ingestion of such batteries has been known to cause death.

4. This product contains a lithium battery which if swallowed has been known to cause death.

5. Do not expose light set to moisture.

6. Remove batteries when not used for an extended period of time, or when depleted.

7. Clean the battery contacts prior to battery installation.

8. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed.

9. Dispose of used batteries properly by following directions on batteries.

10. Use only CR2032 batteries for the remote controller.

11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.

WARNING

Lamp Replacement

Step 1.

Unplug from power source, by pulling out the adapter itself - do not pull on the power cord.

(For reference only)

Step 3. Replace with a new spare

LED lamp (included).

Step 2. Lift up the lamp lock tab,

and pull the bulb and its

plastic base straight out

from the lampholder.

CAUTION:

1.To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product;

b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal, and

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or

electrical shock hazards.

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase.Please contact us at 1-888-919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

CUSTOMER SERVICE FOR CHRISTMAS TREES

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

This manual suits for next models

Other Polygroup Artificial Pine Tree manuals

Polygroup

Polygroup Home Heritage TV70M2D31L03 User manual

Polygroup

Polygroup TV90M4I13C01 User manual

Polygroup

Polygroup TV60M2389C01 User manual

Polygroup

Polygroup TG60M2S14C02 User manual

Polygroup

Polygroup TG76M4244L09 User manual

Polygroup

Polygroup TG76M2X88L03 User manual

Polygroup

Polygroup TG90P2657D21 User manual

Polygroup

Polygroup TG76P4223L21 User manual

Polygroup

Polygroup TG50P4B42K04 User manual

Polygroup

Polygroup TG70M3ANYP01 User manual

Polygroup

Polygroup TG90M3U06C00 User manual

Polygroup

Polygroup TG70M2T20C00 User manual

Polygroup

Polygroup TG76P5433L00 User manual

Polygroup

Polygroup TG70M4073L03 User manual

Polygroup

Polygroup TG76P5347S00 User manual

Polygroup

Polygroup TG76P4826P15 User manual

Polygroup

Polygroup AR-P17004 User manual

Polygroup

Polygroup ENCHANTED FOREST TG60M2Q94X00 User manual

Polygroup

Polygroup TGA0M3ABSC01 User manual

Polygroup

Polygroup TG90M6010C13 User manual

Polygroup

Polygroup TV40M4F65C00 User manual

Polygroup

Polygroup TV46P7001X00 User manual

Polygroup

Polygroup TG76M4A25C07 User manual

Polygroup

Polygroup TV60M4G09C00 User manual

Popular Artificial Pine Tree manuals by other brands

Trim a Home

Trim a Home TY-S6-250L owner's manual

Sears

Sears Donner & Blitzen M44814 owner's manual

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree instructions

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 manual

Costway

Costway CM23595US user manual

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Assembly instructions

Holiday Living

Holiday Living TV40EH339C01 manual

CASARIA

CASARIA DBGB001 instructions

Alpine

Alpine CRD100L-WT owner's manual

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 manual

CASARIA

CASARIA 104006 instructions

Alpine

Alpine CRD111S-GN owner's manual

Home Accents Holiday

Home Accents Holiday 1001540584 manual

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 manual

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Assembly instructions

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree owner's manual

Home Accents Holiday

Home Accents Holiday 1004363936 manual

Polytree

Polytree TG66EH148C17 Assembly instructions