Planet IGS-6325-16T4X User manual
Industrial L3 Multi-Port Gigabit
Managed Ethernet Switch
IGS-6325 DIN-rail Series
Quick Installation Guide
Table of Contents
1. Package Contents................................................................................. 3
2. Requirements....................................................................................... 5
3. Wiring the Power Inputs ....................................................................... 6
3.1 Grounding the Device..................................................................... 9
4. Terminal Setup................................................................................... 10
4.1 Logging on to the Console............................................................ 11
4.2 ConguringIPAddressviaConsole ............................................... 12
5. Starting Web Management .................................................................. 14
5.1 Logging in to the Industrial Managed Switch .................................. 15
5.2 SavingCongurationviaWeb ....................................................... 17
6. RecoveringBacktoDefaultConguration ............................................. 18
7. Customer Support .............................................................................. 20
3
1. Package Contents
Thank you for purchasing PLANET L3 Industrial Managed Switch, IGS-6325
DIN-railseries.Thedescriptionsofthesemodelsareasfollows:
IGS-6325-16P4S IndustrialL316-Port10/100/1000T802.3atPoE+
4-Port100/1000XSFPManagedEthernetSwitch
IGS-6325-16T4S IndustrialL316-Port10/100/1000T+4-Port100/1000X
SFPManagedEthernetSwitch
IGS-6325-16T4X IndustrialL316-Port10/100/1000BASE-T+4-Port
10GBASE-XSFPManagedSwitch
IGS-6325-8T4X IndustrialL316-Port10/100/1000T+4-Port100/1000X
SFPManagedEthernetSwitch
IGS-6325-8T8S IndustrialL316-Port10/100/1000BASE-T+4-Port
10GBASE-XSFPManagedSwitch
IGS-6325-8T8S4X IndustrialL38-Port10/100/1000T+8-Port100/1000X
SFP+4-Port10GSFP+ManagedEthernetSwitch
IGS-6325-8UP2S IndustrialL38-Port10/100/1000T802.3btPoE+2-Port
1G/2.5GSFPManagedEthernetSwitch
IGS-6325-8UP2S2X
IndustrialL38-Port10/100/1000T802.3btPoE+2-Port
1G/2.5GSFP+2-Port10GSFP+ManagedEthernet
Switch
“Industrial Managed Switch” mentioned in this Quick Installation Guide
refers to the above models.
4
Open the box of the Industrial Managed Switch and carefully unpack it. The
boxshouldcontainthefollowingitems:
The
Industrial
Managed
Switch
DB9 to RJ45
Interface
RS232
Console Cable
Quick
Installation
Guide sheet
Wall
Mounting
Kit
RJ45
Dust
Cap
SFP
Dust
Cap
IGS-6325-
16P4S 17 4
IGS-6325-
16T4S 17 4
IGS-6325-
16T4X 17 4
IGS-6325-
8T4X 9 4
IGS-6325-
8T8S 9 8
IGS-6325-
8T8S4X 912
IGS-6325-
8UP2S 9 2
IGS-6325-
8UP2S2X 9 4
If any of these are missing or damaged, please contact your dealer
immediately. If possible, retain the carton including the original packing
materials to enable you to repack the product in case there is a need to return
it to us for repair.
5
2. Requirements
The Industrial Managed Switch provides remote login interface for
management purposes. The following equipment is necessary for further
management:
zWorkstations running Windows XP/2003/7/10/11, MAC OS 10.15 or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPProtocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard).
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator,
suchasHyperTerminalincludedinWindowsXP/2003,puttyorteraterm.
Serial cable -- one end is attached to the RS232 serial port, while the
other end to the console port of the Industrial Managed Switch.
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45
connectors.
The above PC is installed with Web browser.
It is recommended to use Chrome 98.0.xxx or above to access
the Industrial Managed Switch.
6
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed Switch indicates an inlet power
socket and consists of one green terminal block connector within 6 contacts.
Please follow the steps below to insert the power wire.
Insert positive/negative DC power wires into Contacts 1 and 2 for Power 1, or
Contacts 5 and 6 for Power 2.
IGS-6325-16P4S: DC48-56V
DI
0DI
1DO
0DO
1GND GND
Fault
V1+ V2+1A@24V
DC2DC1
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
Input: 48-56V , 7.5A max.
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-1: IGS-6325-16P4S Upper Panel
IGS-6325-16T4S:DC9-48V,AC24V
DI1 DO0 DO1DI0 GNDGND
Max. fault loading: 24V, 1A
DC Input: 9-48V , 3.3A max.
AC Input: 24V
, 1.2A max.
V1+ V2+
PWR1 PWR2Fault
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-2: IGS-6325-16T4S Upper Panel
7
IGS-6325-16T4X:DC9-48V,AC24V
DI1DO0DO1 DI0GNDGND
DC Input: 9-48V , 3.3A max.
AC Input: 24V
, 2A max.
V1+ V2+
PWR1 PWR2Alarm
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-3: IGS-6325-16T4X Upper Panel
IGS-6325-8T4X/IGS-6325-8T8S/IGS-6325-8T8S4X: DC 12~48V, AC 24V
DI1 DO0 DO1DI0 GNDGND
Max. fault loading: 24V, 1A
V1+ V2+
PWR1 PWR2Fault
DC Input: 12-48V , 4A max.
AC Input: 24V , 2A max.
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-4: IGS-6325-8T4X/IGS-6325-8T8S/IGS-6325-8T8S4X Upper Panel
8
IGS-6325-8UP2S/IGS-6325-8UP2S2X: DC 48~54V
DI1 DO0 DO1DI0 GNDGND
DC Input:
48-54V , 8.5A max.
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
PWR1 Alarm PWR2
V1+ V2+
Max. Fault Alarm Loading: 24V, 1A
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-5: IGS-6325-8UP2S/IGS-6325-8UP2S2X Upper Panel
Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
123456
V+ V- V+ V-
Power 1 Power 2
Figure 3-6: The pin of 6-contact terminal block connector
1. The wire gauge for the terminal block should be in the range
from 12 to 24 AWG.
2.Please check the wire AWG Ampere specification before
connectingPLANETIndustrialManagedSwitch.
PWR1 and PWR2 must provide the same DC voltage for power
load balance while operating with dual power input.
9
3.1 Grounding the Device
Users MUST complete grounding wired with the device; otherwise, a sudden
lightning could cause fatal damage to the device.
DI
0DI
1DO
0DO
1GND GND
Fault
V1+ V2+1A@24V
DC2DC1
Dual power input is required
for maximum PoE loading.
Refer to user’s manual for
more details.
Input: 48-56V , 7.5A max.
1 2 3 4 5 6
1 2 3 4 5 6
Earth Ground
10
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to RJ45 type serial (console) port of the Industrial
Managed Switch.
PC/Workstation with
Terminal Emulation Software
RJ45 to DB9 RS232 Cable
Serial Port
Console Port
115200,N,8,1
IGS Industrial Managed Switch
Console
115200,N,8,1
A terminal program is required to make the software connected to the
Industrial Managed Switch.
1. Run terminal program on the OS.
2.When the following screen appears, makesurethat the COM port should be
conguredas:
Baud:115200
Parity:None
Databits:8
Stopbits:1
Flowcontrol:None
This manual suits for next models
1
Table of contents
Other Planet Switch manuals
Planet
Planet MGS-5220-8P2X User manual
Planet
Planet FGSW-2620CS User manual
Planet
Planet WGSD-1022C User manual
Planet
Planet WGSD-10020 Installation instructions
Planet
Planet FSD-504HP User manual
Planet
Planet EPL-2000 User manual
Planet
Planet FNSW-1600P User manual
Planet
Planet MGSW SERIES User manual
Planet
Planet GSW-601S User manual
Planet
Planet HPOE-460 User manual
Planet
Planet Palm-Top EH-501 User manual
Planet
Planet IGS-6325 Series User manual
Planet
Planet WSW-2620 User manual
Planet
Planet IGS-624HPT User manual
Planet
Planet GSD-800S User manual
Planet
Planet DSP-1000 User manual
Planet
Planet GS-5220-8UP2T2X User manual
Planet
Planet LRP-422CST User manual
Planet
Planet IKVM-8010 User manual
Planet
Planet IGS-500T User manual
