Planet IGS-5225-8T2S2X Operator's manual
Industrial L3 Multi-Port Full Gigabit
Managed Ethernet Switch
IGS-5225-8T2S2X/IGS-5225-8P2S2X
Quick Installation Guide
Table of Contents
1. Package Contents...................................................................... 3
2. Requirements............................................................................ 4
3. Wiring the Power Inputs ............................................................ 5
4. Terminal Setup.......................................................................... 7
4.1 Logon to the Console .......................................................... 8
4.2 ConguringIPAddress ........................................................ 8
4.3 StoretheCurrentSwitchConguration................................10
5. Starting Web Management ........................................................11
5.1 LoggingintotheIndustrialManagedSwitch ........................11
5.2 SavingCongurationviaWeb .............................................13
6. Resetting the Switch to Default .................................................15
7. Customer Support ....................................................................16
3
1. Package Contents
Thank you for purchasing PLANET L3 Industrial Managed Switch,
IGS-5225-8T2S2X and IGS-5225-8P2S2X. The descriptions of these
modelsareasfollows:
IGS-5225-8T2S2X:
IndustrialL38-Port10/100/1000T+2-Port
100/1000XSFP+2-Port10GSFP+Managed
EthernetSwitch(-40~75degreesC)
IGS-5225-8P2S2X:
IndustrialL38-Port10/100/1000T802.3atPoE
+2-Port100/1000XSFP+2-Port10GSFP+
ManagedEthernetSwitch(-40~75degreesC)
“Industrial Managed Switch” mentioned in this Quick Installation
Guidereferstotheabovetwomodels.
Open the box of the Industrial Managed Switch and carefully
unpackit.Theboxshouldcontainthefollowingitems:
zTheIndustrialManagedSwitchx1
zQuickInstallationGuidex1
zDINRailKitx1
zWallMountingKitx1
zDB9 to RJ45 Interface RS232 Console Cable x 1
zDustCap(Pleaserefertothetablebelow.)
Model RJ45 Dust Cap SFPDustCap
IGS-5225-8T2S2X
9 4
IGS-5225-8P2S2X
If any of these are missing or damaged, please contact your dealer
immediately. If possible, retain the carton including the original packing
materials to enable you to repack the product in case there is a need
to return it to us for repair.
4
2. Requirements
The Industrial Managed Switch provides remote login interface for
management purposes. The following equipment is necessary for
furthermanagement:
zWorkstations running Windows XP/2003/Vista/7/8/2008/10, MAC
OS X or later, Linux, UNIX, or other platforms are compatible with
TCP/IPProtocols.
zWorkstations are installed with Ethernet NIC (Network Interface
Card)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-
RS232 converter.
The above Workstations have been installed with terminal
emulator, such as Hyper Terminal included in Windows XP/2003,
putty or tera term.
Serial cable -- one end is attached to the RS232 serial port,
while the other end to the console port of the Industrial Managed
Switch.
zEthernet Port Connection
Network cables -- Use standard network (UTP) cables with RJ45
connectors.
The above PC is installed with Web browser and JAVA runtime
environment plug-in.
Note
Itis recommended to use Internet Explorer 8.0 or above
toaccesstheIndustrialManagedSwitch.
5
3. Wiring the Power Inputs
The Upper Panel of the Industrial Managed Switch indicates a DC
inlet power socket and consists of one terminal block connector within
6 contacts. Please follow the steps below to insert the power wire.
1.Insert positive/negative DC power wires into Contacts 1 and 2 for
Power1,orContacts5and6forPower2.
IGS-5225-8T2S2X: 12~48VDC, 24VAC
Input DC 12V~48V
AC 24V
DC1 DC2
Fault
1A@24V
DI1 DO0 DO1DI0 GNDGND
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-1: IGS-5225-8T2S2X Upper Panel
IGS-5225-8P2S2X:48~56VDC
Input DC 48-56V
DI0 DI1 DO0 DO1 GND GND
DC1
+
DC2Fault
+
1A@24V
1 2 3 4 5 6
1 2 3 4 5 6
Figure 3-2: IGS-5225-8P2S2X Upper Panel
6
2. Tighten the wire-clamp screws for preventing the wires from loos-
ening.
123456
V+ V- V+ V-
Power 1 Power 2
Model Positive(+)Pin Negative(-)Pin
IGS-5225-8T2S2X
Pin1/5 Pin2/6
IGS-5225-8P2S2X
Note
The wire gauge for the terminal block should be in the
range from 12 to 24 AWG.
Please check with wire AWG Ampere spec, before
connectingPLANETIndustrialSwitch.
7
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a
PC or notebook computer and to RJ45 type serial (console) port of the
Industrial Managed Switch. The console port of the Industrial Managed
Switch is DCE already, so that you can connect the console port
directlythroughPCwithouttheneedofnullmodem.
PC/Workstation
with
Terminal emulation software
RJ45 to DB9 RS232 Cable
Serial Port
IP Address:
192.168.0.100
IGS Industrial Managed Switch
A terminal program is required to make the software connected to the
IGS-5225-8T2S2XandIGS-5225-8P2S2XIndustrialManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port
shouldbeconguredas:
zBaud:115200
zParity:None
zDatabits:8
zStopbits:1
zFlowcontrol:None
8
4.1 Logon to the Console
Once the terminal has been connected to the device, power on the
IndustrialManagedSwitchandtheterminalwilldisplay“runningtesting
procedures”.
Then, the following message asks to log in user name and password.
The factory default user name and password are shown as follows and
theloginscreeninFigure5-1appears
UserName:admin
Password: admin
Figure 4-1: Console Login Screen
The user can now enter commands to manage the Industrial Managed
Switch. For a detailed description of the commands, please refer to the
following chapters.
Note
1. For security reason, please change and memorize
the new password after this first setup.
2. Only accept command in lowercase letter under
console interface.
4.2 ConguringIPAddress
The Industrial Managed Switch is shipped with default IP address
shownbelow:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
9
To check the current IP address or modify a new IP address for the
Switch,pleaseusetheprocedureasfollows:
Display of the current IP Address
1.Atthe“#”prompt,enter “show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressshowninFigure4-2
Figure 4-2: IP Information Screen
CongurationoftheIPAddress
3.At the “#” prompt, enter the following command and press <Enter>
asshowninFigure4-3.
IGS-5225-8T2S2X#congureterminal
IGS-5225-8T2S2X(cong)#interface vlan 1
IGS5225-8T2S2X(cong-if-vlan)#ip address 192.168.1.100
255.255.255.0
The previous command would apply the following settings for the
IndustrialManagedSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 4-3: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddresshaschanged.
10
4.3 StoretheCurrentSwitchConguration
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
#copyrunning-congstartup-cong
Figure 4-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will
apply the new IP address setting immediately. You can access the Web
interfaceoftheIndustrialManagedSwitchthrough thenewIPaddress.
Note
If you are not familiar with the console command or the
related parameter, enter “help” anytime in console to
getthehelpdescription.
This manual suits for next models
1
Table of contents
Other Planet Switch manuals
Planet
Planet FGSD-1011HP User manual
Planet
Planet FGSW-4840S User manual
Planet
Planet FNSW-2402S User manual
Planet
Planet FSD-804P User manual
Planet
Planet FSD-803PE User manual
Planet
Planet GSW-1600HP User manual
Planet
Planet IGS-6325-16P4S User manual
Planet
Planet WGSW-24000 User manual
Planet
Planet GSD-800 User manual
Planet
Planet POE-2400G User manual
Planet
Planet IGS-1020PTF Series User manual
Planet
Planet GSD-802PS User manual
Planet
Planet GS-6320-8P2X User manual
Planet
Planet WSW-2620 User manual
Planet
Planet GS-5220-8UP2T2X User manual
Planet
Planet IGS-824UPT User manual
Planet
Planet GS-5220-8P2T2S User manual
Planet
Planet GSD-802S User manual
Planet
Planet ISW-511 Series User manual
Planet
Planet FSD-804P User manual
