Planet IFB-244-SLC User manual
Industrial 2-channel
Optical Fiber Bypass Switch
IFB-244 Series
User’s Manual
Table of Contents
1. Package Contents...................................................................... 3
2. Product Features ....................................................................... 4
3. ProductSpecications ................................................................ 5
4 Hardware Introduction ............................................................... 7
4.1 Three-View Diagram............................................................ 7
4.2 LEDDenition ...................................................................10
4.3 Wiring the Power Inputs.....................................................10
5. Hardware Installation................................................................12
5.1 DIN-rail Mounting Installation .............................................12
5.2 Wall-mount Plate Mounting .................................................12
5.3 Side Wall-mount Plate Mounting..........................................13
6. Optical Fiber and Power Connections..........................................14
6.1 Optical Fiber Connection.....................................................14
6.2 Power Connection ..............................................................16
6.3 Recovering Communication from Power Failure.....................16
Customer Support..........................................................................19
3
1. Package Contents
Thank you for purchasing PLANET Industrial 2-channel Optical Fiber
Bypass Switch, IFB-244 Series. In the following section, the term
“Optical Bypass Switch” means the IFB-244 Series.
The descriptions of these models are as follows:
Models Optic Connectors Optic Mode Optic Wavelength
IFB-244-SLC 4 x Duplex LC Single Mode 1310nm & 1550nm
IFB-244-SSC 4 x Duplex SC
IFB-244-MLC 4 x Duplex LC Multimode 850nm & 1300nm
IFB-244-MSC 4 x Duplex SC
Open the box of the Optical Bypass Switch and carefully unpack it. The
box should contain the following items:
Optical Bypass Switch x 1 User’s Manual x 1
DIN-rail Kit Wall-mount Kit
If any of these are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair.
4
2. Product Features
Physical Port
z2-channel duplex or 4-channel simplex ber connection with
optical bypass function
zSupports 100Gbps/40Gbps/10Gbps/1Gbps and 100Mbps ber
connections
zAvailable in Single mode or Multimode
zAvailable in LC/SC connectors
Optical Bypass
zBypass switch time <8ms
zLow return loss
zThroughputnotaectedandnoextradelay
zIncreased reliability on critical network links
Industrial Case and Installation
zIP30-rated metal housing
z9V~48V DC or 24V AC redundant power inputs with reverse
polarity protection
zLow power consumption
zConnective removable terminal block
zSupports 6000 VDC Ethernet ESD protection
z-40 to 75 degrees C operating temperature
zDIN-rail and wall-mount designs
zFree fall, shock-proof and vibration-proof for industries
5
3.ProductSpecications
Model IFB-244-
SLC
IFB-244-
SSC
IFB-244-
MLC
IFB-244-
MSC
HardwareSpecications
Optic Interfaces 4 x Duplex
LC
4 x Duplex
SC
4 x Duplex
LC
4 x Duplex
SC
Optic Mode Single Mode Multimode
Optic Wavelength 1310nm & 1550nm 850nm & 1300nm
Operating
Wavelength 1260~1620nm 850nm±40 /
1300nm±40
Bypass Return
Loss >50dB >35dB
Bypass Insertion
Loss
Typical: 1.0dB
Max: 1.5dB
Bypass Switching
Time <8ms
Speed 100Gbps/40Gbps/10Gbps/1Gbps/100Mbps
ESD Protection Air: 8kV, Contact: 6kV
Enclosure IP30 metal case
Installation DIN-rail kit and wall-mount kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1, Pin 5/6 for Power 2
Pin 3/4 for fault alarm,
Alarm One relay output for power failure.
Alarm relay current carry ability:1A@24V DC
LED Indicator Power 1 (Green), Power 2 (Green), Fault (Red)
Normal operation (Green)
Dimensions
(W x D x H)
32 x 87 x
135 mm
50 x 87 x
135 mm
32 x 87 x
135 mm
50 x 87 x
135 mm
Weight 405g
6
Power
Requirements
Dual 9-48V DC with polarity reverse protection
function
24V AC
Power
Consumption 0.54 watts/1.84BTU
Cabling 9/125µm 50/125µm
Standards Conformance
Regulatory
Compliance
FCC Part 15 Class A
CE
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27(shock)
IEC60068-2-6 (vibration)
Environment
Operating
Temperature -40~75 degrees C
Storage
Temperature -40~85 degrees C
Humidity 5~95% (non-condensing)
7
4 Hardware Introduction
4.1 Three-View Diagram
The three-view diagram of the Optical Bypass Switch consists of
opticalberconnectorand one removable 6-pin terminal block. The
LED indicators are also located on the front panel.
Top View
Side View Front View
Mounting Kit
Mounting Kit
DIN-Rail Kit
Side View Rear View
Unit: mm
32.00
135.00
87.80
97.10
48.8046.50 39.70
28.00
48.80
53.50 53.50
18.00
15.20
40.00
9.20
40.00
28.0018.00
28.00
18.0028.00
28.00
40.00
28.00
P1 P2 Fault
Normal
Remote Network
Local Switch
IFB-244-SLC
TX RX
A
TX RX
B
TX RX
A
TX RX
B
Max. fault loading: 24V, 1A
DC Input: 9-48V
, 0.5A max.
AC Input: 24V
, 0.2A max.
V1+ V2+
PWR1 PWR2Fault
Figure 4-1: IFB-244-SLC and IFB-244-MLC Three-View Diagram
8
50.00
135.00
87.80
97.10
48.8046.50 39.70
87.80
53.50 53.50
18.00
28.00
18.00
40.00
50.00
107.00
18.00
33.55
28.00
18.00
40.00
50.00
Unit: mm
Max. fault loading: 24V, 1A
V1+ V2+
PWR1 PWR2Fault
DC Input: 9-48V , 0.5A max.
AC Input: 24V
, 0.2A max.
P1 P2 Fault
Normal
Remote Network
Local Switch
IFB-244-SSC
TX RX
A
TX RX
B
TX RX
A
TX RX
B
Figure 4-2: IFB-244-SSC and IFB-244-MSC Three-View Diagram
9
Front View
P1 P2 Fault
Normal
Remote Network
Local Switch
IFB-244-SLC
TX RX
A
TX RX
B
TX RX
A
TX RX
B
P1 P2 Fault
Normal
Remote Network
Local Switch
IFB-244-SSC
TX RX
A
TX RX
B
TX RX
A
TX RX
B
Figure 4-3: IFB-244-SLC and
IFB-244-MLC Front View
Figure 4-4: IFB-244-SSC and
IFB-244-MSC Front View
10
4.2 LEDDenition
System
LED Color Function
P1 Green Lit: Power 1 is active.
O: Power 1 is inactive.
P2 Green Lit: Power 2 is active.
O: Power 2 is inactive.
FAULT Red Lit: Hardware indicates either Power 1 or Power
2 has no power.
O: No failure.
STATE
LED Color Function
Normal Green
Lights: To indicate the Bypass Switch is operating
in Normal mode with power input.
O: To indicate the Bypass Switch is operating
in Bypass mode with power failure.
4.3 Wiring the Power Inputs
The upper panel of the Optical Bypass Switch indicates an inlet power
socket and consists of one terminal block connector within 6 contacts.
Please follow the steps below to insert the power wire.
1. Insert positive/negative DC power wires into Contacts 1 and 2 for
Power 1, or Contacts 5 and 6 for Power 2. Figure 4-5 and 4-6
show PWR1 and PWR2 of the Optical Bypass Switch.
IFB-244-SLC/IFB-244-MLC: 9~48V DC or 24V AC
Max. fault loading: 24V, 1A
DC Input: 9-48V
, 0.5A max.
AC Input: 24V
, 0.2A max.
V1+ V2+
PWR1 PWR2Fault
1 2 3 4 5 6
Figure 4-5: IFB-244-SLC/IFB-244-MLC upper panel
This manual suits for next models
4
Table of contents
Other Planet Switch manuals
Planet
Planet FNSW-1600P User manual
Planet
Planet uh-400 User manual
Planet
Planet XGS-6320-8X8TR User manual
Planet
Planet IGS-6325-5X1T User manual
Planet
Planet IGS-10020PT User manual
Planet
Planet WGSW-28040 User manual
Planet
Planet FGSD-1022P User manual
Planet
Planet LRP-822CS User manual
Planet
Planet XGSW-28040HP User manual
Planet
Planet XGS-5240-24X2QR User manual
Planet
Planet IGS-1020PTF Series User manual
Planet
Planet GSD-805 User manual
Planet
Planet IGS-6325-16T4X User manual
Planet
Planet FSD-804P User manual
Planet
Planet FSD-808P User manual
Planet
Planet WGSW-2840 User manual
Planet
Planet WSW-2401 User manual
Planet
Planet FSD-504HP User manual
Planet
Planet TSN-6325-8T4S4X User manual
Planet
Planet ISW-504PS User manual
