Planet XRT-401C User manual
Table of Contents
Requirements 1
Preparation for XRT web administration 1
TCP/IP settings on Windows 95/98 1
TCP/IP settings on Windows NT 4
TCP/IP Settings on Windows 2000: 8
TCP/IP Settings on Windows XP 10
Broadband Router Configuration 12
Physical Installation 12
Quick Setup Wizard 16
1
Requirements
* Cable modem or DSL/ADSL modem.
* Network cables.
Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
* PCs using Windows 95/98/ME, NT4.0, or 2000/XP.
Preparation for XRT web administration
In this section, we’ll introduce steps of how to setup a PC to communicate with XRT
through TCP/IP protocol conguration.
Before starting web browser to connect to XRT, please check TCP/IP congurations on PC:
the PC must be congured either as a DHCP client and or xed IP allocation on the intranet
or Internet. After ensuring TCP/IP conguration on the managing workstation, you may
connect to web administration page of XRT either from intranet, or Internet.
Following are guidelines of setting up TCP/IP congurations on different OS platform.
TCP/IP settings on Windows 95/98
If there is no TCP/IP installed on your Windows 95 or Windows 98, you must add the
protocol and change the settings on your PC.
Step 1 Open the Control Panel, and double-click the Network icon. The Network window
appears
2
3
Step 2 If TCP/IP protocol shown in the network window, please continue to the next step.
If it is not shown, please add TCP/IP protocol support as follows:
a. Click Add.
b. Double-click Protocol in the Select Network Component Type window, then
Select Network Protocol window appears.
c. Choose Microsoft for the manufacturer.
d. Choose TCP/IP for the network protocol.
e. Click OK, and the Network window appears.
Step 3.1 Change the TCP/IP settings to use DHCP as follows (DHCP environment):
a.Double-click the rst TCP/IP cable icon. The TCP/IP Properties window
appears.
b. Verify that the IP Address tab has Obtain an IP address automatically selected
and that the IP Address and Subnet Mask elds are grayed out.
Step 3.2 Change the TCP/IP settings to use xed IP as follows (Fixed IP allocation):
If there is no DHCP server in your network, please consult your network
administrator the TCP/IP parameters of your PC, and insert the obtained data
in IP address tab. To access different IP segment (for example, from LAN to
Internet), you will need to assign the gateway and DNS (for Internet access)
in your PC.
2
3
Step 4 Add the DNS server given to you by your ISP or network administrator:
a. Click the DNS Conguration tab.
b. Click Enable DNS.
c. Enter your host name in the Host eld.
d. Enter your domain name in the Domain eld.
e. Enter the IP address of the DNS server in the DNS Server Search Order eld.
f. Click Add. The IP address displays in the window below the eld.
Step 5 Click OK, and reboot machine to make the modications effective in your PC.
4
5
TCP/IP settings on Windows NT
Obtain an IP address from a DHCP Server
Select Control Panel - Network, and, on the Protocols tab, select the TCP/IP protocol, as
shown below.
Windows NT4.0 - TCP/IP
a) Click the Properties button to see a screen like the one below.
4
5
Windows NT4.0 - IP Address
b) Select the network card for your LAN.
c) Select the appropriate radio button - Obtain an IP address from a DHCP Server
or Specify an IP Address, as explained.
Specify an IP Address
If your PC is already congured with an IP address, check with your network administrator
before making the following changes.
a) The Default Gateway must be set to match your network environment. To set this:
• Click the Advanced button on the screen above.
• On the following screen, click the Add button in the Gateways panel, and enter gate-
way IP address, as shown below.
• If necessary, use the Up button to make the inserted on the first entry in the Gate-
ways list.
6
7
Windows NT4.0 - Add Gateway
b) The DNS should be set to the address provided by your ISP, as follows:
• Click the DNS tab.
• On the DNS screen, shown below, click the Add button (under DNS Service Search
Order), and enter the DNS provided by your ISP.
6
7
Windows NT4.0 - DNS
8
9
TCP/IP Settings on Windows 2000:
Select Control Panel - Network and Dial-up Connection.
a) Right - click the Local Area Connection icon and select Properties. You should see a
screen like the following:
Network Conguration (Win 2000)
b) Select the TCP/IP protocol for your network card.
c) Click on the Properties button. You should then see a screen like the following.
Other manuals for XRT-401C
1
This manual suits for next models
2
Table of contents
Other Planet Network Router manuals
Planet
Planet WGSW-404 User manual
Planet
Planet FGSW-4840S User manual
Planet
Planet MGSW-28240F User manual
Planet
Planet 85M Powerline to Ethernet Bridge with 4-Port Switch... User manual
Planet
Planet MGSW-2402 User manual
Planet
Planet XRT-101A User manual
Planet
Planet FNSW-1600P User manual
Planet
Planet VC-230 User manual
Planet
Planet 802.11g Wireless Access Point / Bridge... User manual
Planet
Planet FGSW-2620VM Series User manual
Planet
Planet GSW-1600S User manual
Planet
Planet WGSD-10020 User manual
Planet
Planet WNRT-625G User manual
Planet
Planet VC-200S User manual
Planet
Planet FNSW-2400PS User manual
Planet
Planet IVR-100 Series User manual
Planet
Planet ADW-4301A/B User manual
Planet
Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B User manual
Planet
Planet SGSW-2620 User manual
Planet
Planet FGSW-1820RS User manual
