Planar PXL2240MW User manual
www.planar.com
USER'S GUIDE
Touch LED LCD Monitor
PXL2240MW
Content
Operation Instructions...................................................................................................................................................1
Unpacking Instructions .................................................................................................................................................2
Safety Precautions...........................................................................................................................................................2
Package Overview ...........................................................................................................................................................3
Front View of the Product ............................................................................................................................................4
Rear View of the Product ..............................................................................................................................................5
Quick Installation .............................................................................................................................................................6
Basic Operation and Calibration/Reset Instructions...........................................................................................7
Advanced Operation—OSD Menu............................................................................................................................9
Supporting Timing Modes ........................................................................................................................................ 12
Technical Information................................................................................................................................................. 13
Wall-Mount Installation Instructions..................................................................................................................... 14
Troubleshooting............................................................................................................................................................ 15
Planar Support ............................................................................................................................................................... 16
1
Operation Instructions
Thank you for purchasing the PXL2240MW multi-touch LED monitor. Please read this guide
thoroughly before installation.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
WARNING: (FOR FCC CERTIFIED MODELS)
This LED Monitor has been tested and found compliant with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide proper protection
against harmful interference to a residential installation. This Touch LED LCD Monitor generates,
uses, and can radiate radio frequency energy. Harmful interference to radio communication may
be the result if it‘s not properly installed and used. However, there is no guarantee that
interference will not occur in a particular installation. If this Touchscreen LED Monitor does cause
serious interference to radio or television reception, resetting may correct it. Moreover, users are
encouraged to reduce interference by doing one or more of the following:
Reorient or relocate the receiving antenna.
Move the Touch LED LCD Monitor and the receiver further away from each other.
Connect the Touch LED LCD Monitor into an outlet on a circuit different from that to which
the receiver is connected.
Consult your local dealer or a qualified technician.
FCC Warning:
To assure a continued FCC compliance, a user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized
changes or modifications to this Touch LED LCD Monitor would void the user‘s authority to
operate this device.
Note: If necessary, shielded interface cables and AC power cord must be used to meet the
emission level limits.
According to WEEE regulation, this Touch LED LCD Monitor can't be handled as normal trash in Europe when
it is out of usage. Please refer to the recycle information on Planar’s website to handle it.
For more information on how to recycle your product, please visit http://www.planar.com/about/green/
2
Unpacking Instructions
Move the Touch LED LCD Monitor out of the package and take off the plastic bag and
Polystyrene Foam.
Pull the base from Parallel versus Panel to Vertical.
Adjust the Panel between 4° leaning forward and 40° leaning backward.
Safety Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
Turn off the product before cleaning.
Touch screen surface may be cleaned using a soft clean cloth moistened with mild window
glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.
Use a soft cloth moistened with mild detergent to clean the display housing.
Disconnect the power plug from AC outlet if the product is not going to be used for an
extended period of time.
Don’t:
Do not touch the LED Display screen surface with sharp or hard objects.
Do not use abrasive cleaners, waxes or solvents for your cleaning.
Do not operate the product under the following conditions:
o Extremely hot, cold or humid environment.
o Areas susceptible to excessive dust and dirt.
o Near any appliance generating a strong magnetic field.
o In direct sunlight.
If smoke, abnormal noise or odor emits from your Touch LED LCD Monitor, remove the power
cord immediately and call your service center.
Never remove the rear cover of your Touch LED LCD Monitor. The display unit inside contains
high-voltage parts and may cause electric shock.
Never try to repair your Touch LED LCD Monitor yourself. Always call your service center or a
qualified technician to fix it.
Due to safety concerns, if the VESA mounting kit is purchased separately, please
make sure the mounting kit is UL-listed, and replaceable only by service personnel.
3
Package Overview
Touchscreen LED Monitor Power Cord
VGA Signal Cable Audio-in Cable
USB Cable (A to B) HDMI Cable
User’s Guide
4
Front View of the Product
①②③④⑤⑥
①OSD Turn On/ Off
②Volume Adjust/ Scroll Down/ Adjust Decrease
③Preset Mode/ Scroll UP/ Adjust Increase
④Input select/ Confirm Selection
⑤LED Indicator
⑥Power On/ Off
* Hot keys Instructions please see “Using the OSD Menu”on page 7.
5
Rear View of the Product
①②③④⑤ ⑥ ⑦
①Power Input
②USB - Type A to B
③Headphone Jack
④Audio Input
⑤HDMI input (HDMI 19 pin)
⑥DVI Input (DVI 24 pin)
⑦VGA Input (D-Sub 15 pin)
6
Quick Installation
1. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make
sure both monitor and computer are powered OFF.
2. Connect the audio cable from audio output of computer to the audio input of the monitor.
3. Connect the USB cable from the computer to the monitor.
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.
5. Power-ON computer and then POWER-ON the monitor.
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x
1080 @ 60Hz.
Figure 1:
Power cable VGA cable
DVI cable
HDMI cable
(not supplied)
PC
Audio cable
USB 2.0 cable
7
Basic Operation and Calibration/Reset Instructions
Before using the Touch LED LCD Monitor:
Connect external equipment properly.
Insert the power plug, and the power LED indicator will light orange.
Power On/Off
To turn the Touch LED LCD Monitor on/off:
Press POWER button on the front. The power LED indicator light will be blue when the
Touchscreen LED Monitor is on.
Using the OSD Menu
Use OSD menus to adjust settings by using the menu button on the front of the Touchscreen
LED Monitor.
Displays main menu
1 Exits from OSD menu
2 Selects between VGA, DVI, HDMI or Auto mode
Select the desired item when in OSD menu
▼
When not in OSD menu, directly enters Volume adjust
Select the desired item when in OSD menu
▲
When not in OSD menu, directly enters Preset Mode
▼+ ▲Recalls both Contrast and Brightness (when not in OSD menu)
OSD Lock Out Function
When Touchscreen LED Monitor is in normal mode, the “OSD Lock Out” function can be enabled.
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.
Press and hold the 1button and the ▲button for 3 seconds to lock the OSD buttons.
The Touch LED LCD Monitor will show an “OSD Locked” message for 3 seconds and the message
will disappear automatically.
Repeat this step to unlock.
8
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.
Press and hold the 1button and the ▼button for 3 seconds to lock all 5 buttons.
The Touchscreen LED Monitor will show a “Power Button Locked” message for 3 seconds and the
message will disappear automatically.
Repeat this step to unlock.
PXL2240MW Calibration/Reset Instructions:
The PXL2240MW is available with USB connection. It is Microsoft® Windows® 7, 8 HID (Human
Interface Device) compatible if you use the USB touch screen interface. No additional software
driver is required. Calibration is a simple process and can be invoked by running Tablet PC
Settings from Control Panel and clicking the Calibrate button.
Click the Reset button to reset the touchscreen to the factory calibration settings. To reset the
existing calibration data, click "Reset" in the Tablet PC Settings window.
Table of contents
Other Planar Monitor manuals
Planar
Planar LB1500R User manual
Planar
Planar Clarity Matrix G3 User manual
Planar
Planar PS Series User manual
Planar
Planar PT1911MX User manual
Planar
Planar EP4650 User manual
Planar
Planar PXL2251MW User manual
Planar
Planar PT1910MX User manual
Planar
Planar PT1775S User manual
Planar
Planar PL1700 User manual
Planar
Planar SD2320W User manual
Planar
Planar LED2210MW User manual
Planar
Planar PV174 User manual
Planar
Planar PE170 User manual
Planar
Planar VitalScreen S VSS15X User manual
Planar
Planar PX171M User manual
Planar
Planar PX171M User manual
Planar
Planar PT170 User manual
Planar
Planar PQ170 User manual
Planar
Planar PXV2410 User manual
Planar
Planar PS5580 User manual
