Planar CleanPole M4POLE-PS User manual
Planar Clean Pole™
Installation and User’s Guide
Model Number M4POLE-PS
The Definition of Quality
ii Clean Pole Installation and User’s Guide (OM720-02)
Copyright © 2000 by Planar Systems, Inc.
Planar and The Definition of Quality are registered trademarks and Clean Screen and Clean Pole are
trademarks of Planar Systems, Inc.
This document is subject to change without notice. While every attempt at accuracy is made, Planar
Systems assumes no responsibility for any errors that may appear in this document. Planar provides this
information as reference only and does not imply any recommendation or endorsement of other vendor’s
products.
Revision Control
Date Description
June 2000 Document number OM720-02 Part number: 020-0153-01 REV B
Clean Pole Installation and User’s Guide (OM720-02) iii
CONTENTS
INTRODUCTION...................................................................................................................... 1
WARRANTY INFORMATION................................................................................................ 2
Commencement and Duration of Warranty............................................................................. 2
Place of Repair or Replacement.............................................................................................. 2
Limitation of Warranty............................................................................................................ 2
TECHNICAL ASSISTANCE.................................................................................................... 3
Installation............................................................................................................................... 3
Customer Support.................................................................................................................... 3
OPERATOR’S SAFETY SUMMARY ..................................................................................... 4
Safety Summary ...................................................................................................................... 4
Terms and Symbols................................................................................................................. 5
ASSEMBLY INSTRUCTIONS................................................................................................. 6
Introduction ............................................................................................................................. 6
Unpacking and Assembly Instructions.................................................................................... 6
Disassembly Process ............................................................................................................. 11
Connecting the Clean Pole Charger ...................................................................................... 12
Charging a Battery................................................................................................................. 12
OPERATING INSTRUCTIONS ............................................................................................. 13
Battery Life............................................................................................................................ 13
SERVICE SAFETY SUMMARY ........................................................................................... 14
Do not service the Clean Pole with the power on. ................................................................ 14
Battery Replacement ............................................................................................................. 14
Internal Fan Cleaning............................................................................................................ 16
SPECIFICATIONS.................................................................................................................. 17
Accessories............................................................................................................................ 17
Performance Conditions........................................................................................................ 17
MAINTENANCE..................................................................................................................... 19
Calibration............................................................................................................................. 19
Maintenance Requirements................................................................................................... 19
Service Information............................................................................................................... 19
Order Information.................................................................................................................. 19
iv Clean Pole Installation and User’s Guide (OM720-02)
Clean Pole Installation and User’s Guide (OM720-02) 1
INTRODUCTION
Thank you for purchasing Planar's mobile Clean Pole. The Clean Pole is to be used to add
mobility to the Clean Screen™. To recharge, plug the Clean Pole unit into a standard outlet.
The battery system includes one six-cell twelve-volt battery and a recharger, packaged on the
base of the Clean Pole. The user may choose either an audible or visual alert when the battery
falls below a minimum charge. To choose, use the toggle switch on the top of the unit. With
this innovative, mobile, battery-powered workstation, Planar continues its commitment to
provide the best in bedside computing solutions.
In order to receive the full benefit of the Clean Pole, the user must understand how to
properly use the battery system. It is recommended that the Clean Pole be plugged in
whenever not in use to avoid system downtime.
2Clean Pole Installation and User’s Guide (OM720-02)
WARRANTY INFORMATION
Planar Systems (Planar) warrants that the goods sold hereunder will be free of defects in
materials and workmanship, and such goods will substantially conform to the specifications
furnished by Planar, and to any drawings or specifications furnished to Planar by the Buyer if
approved by Planar. This warranty shall be effective only if Planar receives notice of such
defect or nonconformance during the period of the warranty. Planar's sole and exclusive
liability for breach of warranty shall be, at Planar's option, to repair or replace the Planar
product(s) with refurbished units or provide a credit to buyer in the amount of the purchase
price.
Commencement and Duration of Warranty
The warranty period begins on the date of shipment.
The goods sold hereunder are warranted for a period of two years (excluding battery) from
date of shipment unless otherwise agreed to by Buyer and Planar. No extension of the
warranty will be given during the time the goods are in Planar’s possession. Batteries are
warranted for a period of ninety (90) days.
Place of Repair or Replacement
In order to obtain service under this warranty, Buyer must notify Planar of the defect before
expiration of the warranty period, and request a “Return Material Authorization Number.” If
the configuration has been modified in any manner, the product must be returned to its
original configuration before any warranty service will be performed by Planar. No goods are
to be returned to Planar without prior authorization. Buyer will be responsible for packaging
and shipping the defective goods to the Planar Service Facility located at Beaverton, Oregon,
with shipping charges prepaid.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from (a) improper or inadequate
maintenance by Buyer; (b) unauthorized modification of the goods; (c) operation of the goods
outside of the environmental specifications of the goods; (d) neglect, misuse or abuse of the
goods; or (e) modification or integration with other goods not covered by Planar's warranty
when such modification or integration increases the likelihood of damage to the goods.
THE WARRANTY IS GIVEN BY PLANAR IN LIEU OF ANY OTHER WARRANTIES, EXPRESS
OR IMPLIED. PLANAR DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. PLANAR’S RESPONSIBILITY TO REPAIR OR
REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO
THE BUYER FOR BREACH OF THIS WARRANTY. PLANAR WILL NOT BE LIABLE FOR ANY
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF
WHETHER PLANAR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
Clean Pole Installation and User’s Guide (OM720-02) 3
TECHNICAL ASSISTANCE
The warranty set forth above shall not be enlarged, diminished of affected by, and no
obligation or liability shall arise from Planar, any authorized dealer or any other person's
rendering of technical advice, assistance or services in connection with the buyer's order of
the goods furnished hereunder. The Buyer is not relying on Planar's skill or judgment to select
or furnish suitable goods.
Installation
Planar makes no warranty with respect to any installation of Planar's product(s) by Planar, any
authorized dealer, or any other person.
Customer Support
Please contact Planar Systems in Beaverton, Oregon.
4Clean Pole Installation and User’s Guide (OM720-02)
OPERATOR’S SAFETY SUMMARY
Safety Summary
When using your Clean Pole Power System, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons, including the
following:
Read Instructions
Read and follow all safety and operating instructions.
Use the Proper Power Source
Operate only from the type of power source indicated on the rating label. To disconnect from
the power source, remove the power cord. This product is intended to run from a power
source supplying not more than 120 VAC RMS between the supply conductors, or between
supply conductor and ground. Refer to Service Safety Summary for battery replacement
information.
Grounding
This unit is Class II (double insulated), and is provided with a 3-wire grounding type power
cord.
Power Cord
Use only the power cord and connector that is specified for your product and that is in good
condition. Refer cord and connector changes to qualified service personnel. When the cord is
not in use, remove to avoid damage.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an explosive atmosphere.
Do Not Remove Covers or Panels
Product covers and panels provide significant protection against electrical shock and heat
sources that may cause burns. Do not operate the product with covers removed.
Dispose of Batteries Safely
Federal law requires that Lead Acid batteries be disposed of in a safe and ecologically sound
fashion. If in doubt as to how to accomplish this please contact your state government or
Planar Systems for assistance.
Ventilation
Avoid overheating by keeping slots and openings unblocked.
Clean Pole Installation and User’s Guide (OM720-02) 5
Damage Requiring Service
Unplug the unit from the wall outlet and call Planar Customer Service when any of the
following conditions occur:
A. When the power cord is damaged or frayed.
B. If the unit does not operate normally by following the operating instructions.
C. It the unit exhibits a distinct change in performance.
Terms and Symbols
Various terms and symbols are used in this manual and on the equipment. These terms and
symbols alert you to possible hazards or other conditions of which you may need to be aware.
These terms and conditions are shown in the following tables:
Terms and Symbols in the Manual
CAUTION CAUTION statements involve conditions or practices that could damage
the equipment or other property.
WARNING
WARNING statements involve conditions or practices that could result in
injury or loss of life.
Terms and Symbols on the Equipment
CAUTION
CAUTION shows an injury hazard not immediately accessible as one reads
the marking, or a hazard to property including the equipment itself.
WARNING
DANGER WARNING or DANGER shows an immediately accessible injury hazard.
!ATTENTION -- Refer to manual
Class II Equipment
6Clean Pole Installation and User’s Guide (OM720-02)
ASSEMBLY INSTRUCTIONS
Introduction
The Clean Pole is a product designed to be used with the Clean Screen computer workstation.
Be aware of a compressed spring in the central column of the pole which balances the weight
of the steel worksurface, the Clean Screen computer and its input devices. Without the weight
of these items the spring can extend upward with formidable force. There is a pedal at the
bottom of the pole that allows the spring to extend or be compressed.
These instructions apply to both models
M4POLE-PS: FOUR-WHEELED CLEAN POLE with Rechargeable Power
M4POLE-NPS: FOUR-WHEELED CLEAN POLE with the AC converter brick
Unpacking and Assembly Instructions
Disassembly is accomplished by reversing this sequence
Tools Needed
To assemble the Clean Pole, you will need a 9/16” (13mm) wrench to remove six bolts from
the packing carton. You will then use 5/32” (4mm) allen wrench to insert four bolts holding
the upper worksurface to the pole column. Then mount the computer with four Phillips head
bolts.
Unpack the Clean Pole
Step 1. Open the box.
Pad box
Worksurface box
Open the top of the box and remove the Pad box and the Worksurface box. (The power
supply has been removed in this picture for clarity.)
This manual suits for next models
1
Table of contents
Other Planar Monitor manuals
Planar
Planar PQ1710M User manual
Planar
Planar PS5074K-N User manual
Planar
Planar LA1910R User manual
Planar
Planar PT1545R User manual
Planar
Planar PQ170 User manual
Planar
Planar Dome E2c User manual
Planar
Planar LT1201 User manual
Planar
Planar Dome EX User manual
Planar
Planar PX1910M User manual
Planar
Planar PT1700MX User manual
Planar
Planar Dome E2 User manual
Planar
Planar Planar GX2MP User manual
Planar
Planar PLL1910W User manual
Planar
Planar EL640.480-AF1 User manual
Planar
Planar SD2020 User manual
Planar
Planar SD2420W User manual
Planar
Planar PT1545R User manual
Planar
Planar PL170M User manual
Planar
Planar PE1700 User manual
Planar
Planar Dome Q2 User manual
