Piusi Cube 56/33 Installation and operating instructions

Bulletin M0097D rev. 00 EnIT

Installation, use and maintenance | EN

Installazione, uso e manutenzione | IT

2 /60

Installation, use and maintenance

ENGLISH

Bulletin M0097D rev. 00 ENIT

CUBE

/124

3 /60

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.

. EC Declaration of Conformity 

. General information 

. General warnings for dispencers 

. Safety information 

.. First aid rules 

.. General safety rules 

. Transport, handling and unpacking 

.. Disposal 

. Using and looking aer manuals 

. CUBE dispenser 

.. CUBE components 

.. Technical speciﬁcations 

.. Permied uses 

.. Not permied uses 

. Environmental conditions 

. Installation 

.. Mechanical installation 

.. Hydraulic connections 

.. Electrical connections 

. Starting 

. Instructions for use 

. Maintenance 

. Troubleshooting 

. Spare parts 

. Manufacturer’s details and aer-sales service 

TABLE Of CONTENTS

4 /60

Installation, use and maintenance

M0097D rev.00 ENIT

EC DECLARATION OF CONFORMITY

The undersigned:

PIUSI S.p.A.

Via Pacinoi c.m. z.i. Rangavino

 Suzzara - Mantova - Italia

HEREBY STATES

under its own responsibility, that the equipment described below:

Description: DIESEL FUEL DISPENSER

Model: CUBE 56 - CUBE 70 - CUBE 90 - CUBE DC

Serial number: refer to Lot Number shown on CE plate aﬃxed to the product

Year of manufacture: refer to the year of production shown on the CE plate

aﬃxed to the product

is in conformity with the legal provisions indicated in the directives:

¦ Machine Directive //EC

¦ Low-Voltage Directive //EC

¦ Electromagnetic Compatibility Directive //EC

The documentation is at the disposal of the competent authority following

motivated request at PIUSI S.p.A. or following request sent to the email address:

doc_tec@piusi.com

The person authorised to compile the technical ﬁle and draw up the declaration

is Oo Varini as legal representative.

Suzzara, // Oo Varini

legal representative

.

The CUBE dispensing units described in this manual are for professional use only.

CUBE

/124

5 /60

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.

.

.

To ensure operator safety and to protect the pump from potential

damage, workers must be fully acquainted with this instruction manual

before performing any operation.

CUBE dispensers are appliances designed for the private distribution of diesel fuel for

motor transport. Featuring absolute safety and ease of use, CUBE dispensers are extremely

reliable high-performance ready-to-use units that are fast to install. All models in the series

share the solid metal frame and self-priming pumps, while they diﬀer in terms of the types of

ﬂow meter (mechanical or electronic) and the presence on certain models of an electronic

delivery management system.

CUBE's strengths lie in the reliability of the pumping units, the metering precision of product

dispensed, and the high performance of the management systems.

THE PERSONNEL WHO USE THE DISPENSER AND THE TECHNICAL SUPPORT

PERSONNEL MUST BE FAMILIAR WITH THE FIRST AID AND SAFETY RULES

DESCRIBED IN THIS MANUAL.

Keep this technical manual in a place that is familiar and accessible to all the personnel

who have access to the dispenser.

The following symbols will be used throughout the manual to highlight

safety information and precautions of particular importance:

Important

precautions

Symbols used

in the manual

. GENERAL WARNINGS FOR DISPENCERS

general INFORMATION

This symbol

indicates safe

working practices

for operators and/

or potentially

exposed persons.

This symbol

indicates that

there is risk of

damage to the

equipment and/or

its components.

This symbol

indicates useful

information.

WARNING ATTENTION NOTE

6 /60

Installation, use and maintenance

M0097D rev.00 ENIT

This manual should be complete and legible throughout. It should

remain available to end users and specialist installation and

maintenance technicians for consultation at any time.

All reproduction rights are reserved by PIUSI S.p.A.

The text cannot be reprinted without the wrien permission

of PIUSI S.p.A.

THIS MANUAL IS THE PROPERTY OF PIUSI S.p.A..

ANY REPRODUCTION, EVEN PARTIAL, IS FORBIDDEN.

Manual

preservation

Mains -

preliminary

checks before

installation and

maintenance

control

Fire and

explosion

Reproduction

rights

SAFETY INFORMATION.

When ﬂammable ﬂuids are present in the working area, such as

gasoline and windshield wiper ﬂuid, be aware that ﬂammable

fumes can ignite or explode. To help prevent ﬁre and explosions:

¦ use equipment only in well ventilated area;

¦ keep working area free of debris, including rags and spilled or

open containers of solvent and gasoline;

¦ do not plug or unplug power cords or turn lights on or oﬀ when

ﬂammable fumes are present;

¦ ground all equipment in the working area;

¦ stop operation immediately if static sparking occurs or if you

feel a shock, do not use equipment until you identify and

correct the problem;

¦ keep a working ﬁre extinguisher in the working area.

You must avoid any contact between the electrical power

supply and the ﬂuid.

Before any checks or maintenance work are carried out, disconnect

the power source.

WARNING

CUBE

/124

7 /60

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.

Electric shock

Danger of electrocution and death.

This equipment must be grounded. Improper grounding,

setup or usage of the system can cause electric shock.

Turn oﬀ and disconnect power cord before servicing

equipment.

Connect only to grounded electrical outlets.

Use only  wire extension cords in accordance with local

electrical codes. Extension cords should have a ground

lead.

Ensure ground prongs are intact on power and extension

cords.

Do not expose to rain. Store indoors. Never touch the

electric plug of socket with wet hands.

Do not turn the dispensing system on if the power

connection cord or other important parts of the apparatus

are damaged, such as the inlet-outlet plumbing, dispensing

nozzle or safety devices. Replace damaged components

before operation.

Before each use check that the power connection cord

and power plug are not damaged. If damaged, have power

connection cord replaced before use by a qualiﬁed

electrician. The electrical connection between the plug

and socket must be kept well away from water.

Unsuitable extension leads can be hazardous, in

accordance with current regulations. Only extension cords

that are labelled for outdoor use and have a suﬃcient

conduction path should be used outdoors.

For safety reasons, we recommend that equipment be

used only with a earth-leakage circuit breaker (max 

mA).

Electrical connections must use ground fault circuit

interrupter (GFCI).

WARNING

8 /60

Installation, use and maintenance

M0097D rev.00 ENIT

Equipment

misuse

Burn hazard

Toxic ﬂuid

or fumes

hazard

Do not operate the unit when fatigued or under the inﬂuence of

drugs or alcohol.

Do not leave the working area while equipment is energized or

under pressure.

Turn oﬀ all equipment when equipment is not in use.

Do not alter or modify equipment. Alterations or modiﬁcations may

void agency approvals and create safety hazards. Route hoses and

cables away from traﬃc areas, sharp edges, moving parts, and hot

surfaces.

Do not kink or over bend hoses or use hoses to pull equipment.

Keep children and animals away from working area.

Comply with all applicable safety regulations.

Equipment surfaces and ﬂuid that is heated can become very hot

during operation: to avoid severe burns do not touch hot ﬂuid or

equipment.

Do not smoke or use open ﬂames during dispensing operations.

Read MSDS’s to know the speciﬁc hazards of the ﬂuids you are using.

Store hazardous ﬂuid in approved containers, and dispose of it

according to applicable guidelines.

Prolonged contact with the treated product may cause skin irritation:

always wear protective gloves during dispensing.

WARNING

CUBE

/124

9 /60

This manual is the property of PIUSI S.p.A. Any reproduction, even partial, is forbidden.

Please refer to the

safety data sheet for

the product. In all

cases, seek medical

aention immediately.

NOTE

Whenever fuel has been swallowed, do not induce vomiting, but have

the injured person drink large quantities of milk or water.

In the event of problems developing following EYE/SKIN

CONTACT, INHALATION or INGESTION of the treated product,

please refer to the SAFETY DATA SHEET of the ﬂuid handled.

Disconnect the power source, or use a

dry insulator to protect yourself while

you move the injured person away from

any electrical conductor. Avoid touching

the injured person with your bare hands

until he is far away from any conductor.

Immediately call for help from qualiﬁed

and trained personnel.

Persons who

have ingested

toxic liquids

Contact with

the product

Persons who

have suﬀered

electric shock

. FIRST AID RULES

Essential protective

equipment

characteristics

Personal

protective

equipment that

must be worn

. GENERAL SAFETY RULES

Wear protective equipment according to the info below:

¦ suited to the operations that need to be performed;

¦ resistant to cleaning products.

Wear the following personal protective equipment during handling

and installation:

safety shoes

close-ﬁing clothings

protective gloves

safety goggles

Use Instruction Manual

10 /60

Installation, use and maintenance

M0097D rev.00 ENIT

.

. TRANSPORT, HANDLING AND UNPACKING

When the machine is not used, whether it is packed or unpacked, it must be stored in a place

protected from the weather (rain, damp, sun, etc.) and from dust. To remove the cardboard

packaging, use a pair of scissors or cuers, being careful not to damage the appliance. Fully open

the packaging and take out the CUBE so that it can be taken to the place of ﬁnal installation.

Due to the weight of CUBE, the product should be removed from its packaging by 2 persons.

Moreover, 2 persons should also aend to the positioning, ﬁxing and installation phase. Once the

packaging has been removed, the station must always be kept in vertical position. Packaging parts

(cardboard, wood, cellophane, etc.) must be placed in speciﬁc containers and not le lying around

or within reach of children, as these represent a potential risk hazard. They must be disposed of

according to the regulations applicable in the country of use. Check the integrity of the machine

by making sure the shipped parts are not damaged in any way that could aﬀect safety and

operation. In case of any doubts, do not start the appliance but contact the manufacturer’s aer-

sales service.

CUBE is shipped inside stackable cardboard packaging.

Dimensions of packaging:

H =  mm / L =  mm / D =  mm

Weight of packaging: , kg

Total weight:

CUBE / =  kg

CUBE / =  kg

CUBE DC V =  kg

CUBE DC V=  kg

CUBE / =  kg

. DISPOSAL

Foreword The components must be given to companies specializing in disposal and

recycling of industrial waste.

Disposal of

packaging

The packaging consists of biodegradable cardboard which can be

delivered to companies specializing in normal recycling of cellulose.

Other manuals for Cube 56/33

This manual suits for next models

Table of contents

Other Piusi Dispenser manuals

Piusi

Piusi SUZZARABLUE PRO User manual

Piusi

Piusi MC BOXdc B.SMART Quick start guide

Piusi

Piusi DELPHIN PRO Quick start guide

Piusi

Piusi CUBE 70 MC User manual

Piusi

Piusi PW-LAN User manual

Piusi

Piusi SB325M Use and care manual

Piusi

Piusi CUBE B.SMART Quick start guide

Piusi

Piusi Cube 56/33 User manual

Piusi

Piusi MC BOX B.SMART Specification sheet

Piusi

Piusi SB325 User manual

Piusi

Piusi MC BOX 1.5 ETL User manual

Popular Dispenser manuals by other brands

Silver King

Silver King Majestic SK12MAJ Technical manual and replacement parts list

Franke

Franke F3Dn Twin Service manual

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Operation and installation instructions

DAN DRYER

DAN DRYER 282 installation guide

Essity

Essity Tork 473208 manual

CBS

CBS SD300BU-88 COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST

Sealey

Sealey MK77 manual

Fluid Management

Fluid Management Accutinter 1600 End user guide

Franke

Franke DVS SD99-010 Installation and operating instructions

Graco

Graco Dispensit 1053-10C operation & maintenance

ITALTINTO

ITALTINTO i50 user manual

Coca-Cola

Coca-Cola FREESTYLE 9000 user guide

Graco

Graco ProMix 2KE Operation

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 user manual

Wayne

Wayne GLOBAL VISTA CNG instruction manual

clarsen

clarsen H133 Instructions for use

PicoBrew

PicoBrew Zymatic user manual

BOWMAN

BOWMAN BP-007 manual