Pilz PSSu E F PS1 User manual
Operating Manual — No. 21298-EN-04
Decentralised system PSSuniversal I/O
Operating Manual PSSu E F PS1(-T)
Operating Manual PSSu E F PS1(-T)
PSSu E F PS1(-T)
This document is a translation of the original document.
All rights to this documentation are reserved by Pilz GmbH & Co. KG. Co ies may be made
for internal ur oses.
Suggestions and comments for im roving this documentation will be gratefully received.
Pilz®, PIT®, PMI®, PNOZ®, Primo®, PSEN®, PSS®, PVIS®, SafetyBUS ®, SafetyEYE®,
SafetyNET ®, the s irit of safety® are registered and rotected trademarks of
Pilz GmbH & Co. KG in some countries.
SD means Secure Digital.
Preface
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Contents
Contents
Contents Page
Chapter 1 Introduction
1.1 Validity of documentation 1-1
1.1.1 Retaining the documentation 1-1
1.2 Overview of documentation 1-2
1.3 Definition of symbols 1-3
Chapter 2 Overview
2.1 Module structure 2-1
2.1.1 Module features 2-1
2.2 Front view 2-2
Chapter 3 Safety
3.1 Intended use 3-1
3.2 Safety regulations 3-3
3.2.1 Use of qualified personnel 3-3
3.2.2 Warranty and liability 3-3
3.2.3 Disposal 3-3
Chapter 4 Function description
4.1 Module features 4-1
4.1.1 Supply voltage 4-1
4.1.1.1 Current load capacity 4-2
4.1.2 Integrated protection mechanisms 4-4
4.2 Configuration 4-5
4.2.1 Application as a general supply module 4-5
4.2.2 Addresses in the process image 4-5
4.2.3 FS error behaviour 4-6
Chapter 5 Installation
5.1 General installation guidelines 5-1
5.1.1 Dimensions 5-1
5.2 Installing the base module 5-2
5.3 Inserting and removing an electronic
module
5-3
5.3.1 Inserting an electronic module 5-3
5.3.2 Removing an electronic module 5-4
5.3.3 Changing an electronic module during
operation
5-4
Contents
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
2
Chapter 6 Wiring
6.1 General wiring guidelines 6-1
6.1.1 Mechanical connection of the base
modules
6-2
6.2 Terminal configuration 6-4
6.3 Connecting the module 6-7
Chapter 7 Operation
7.1 Messages 7-1
7.2 Display elements 7-2
7.2.1 Display elements for module diagnostics 7-2
7.2.2 Display elements for the status of the
module supply and periphery supply
7-3
7.3 Status byte 7-4
Chapter 8 Technical details
8.1 Technical details 8-1
8.2 Order reference 8-3
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1.1 Validity of documentation
1 Introduction
11000IntroductionIntroduction1-1.1Validity of documentation1100Validity of documentation1-][BA Einf Gültigkeit_(T)
This documentation is valid for the products PSSu E F PS1 and
PSSu E F PS1-T. It is valid until new documentation is published.
Bestimm _Verwe nd_Zusatz-(T)
The module PSSu E F PS1-T is suitable for use where there are in-
creased environmental requirements (see Technical Details).
Einf Einleitung
This operating manual explains the function and operation, describes
the installation and provides guidelines on how to connect the product .
1.1.1 Retaining the documentation
Retaining the documentation1-Einf Aufbewahren
This documentation is intended for instruction and should be retained
for future reference.
1.2 Overview of documentation
1 Introduction
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1-2
1.2Overview of documentation1200Overview of documentation1-][BA Einf Übersicht E-Modul
1 Introduction
The introduction is designed to familiarise you with the contents, struc-
ture and specific order of this manual.
2 Overview
This chapter provides information on the product's most important fea-
tures.
3 Safety
This chapter must be read as it contains important information on safety
and intended use.
4 Function Description
This chapter describes the product's individual components.
5 Installation
This chapter explains how to install the product.
6 Wiring
This chapter describes the product's wiring.
7 Operation
This chapter explains the display elements and advises on what to do if
a fault occurs.
8 Technical Details
This chapter contains the product's technical details and order refer-
ence.
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1.3 Definition of symbols
1 Introduction
1.3Definition of symbols1300Definition of symbols1-Einfhrung Zeichen
Information that is particularly important is identified as follows:
DANGER!
This warning must be heeded! It warns of a hazardous situation
that poses an immediate threat of serious injury and death and
indicates preventive measures that can be taken.
WARNING!
This warning must be heeded! It warns of a hazardous situation
that could lead to serious injury and death and indicates preven-
tive measures that can be taken.
CAUTION!
This refers to a hazard that can lead to a less serious or minor
injury plus material damage, and also provides information on
preventive measures that can be taken.
NOTICE
This describes a situation in which the product or devices could
be damaged and also provides information on preventive meas-
ures that can be taken.
INFORMATION
This gives advice on applications and provides information on
special features, as well as highlighting areas within the text that
are of particular importance.
1 Introduction
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
1-4
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
2.1 Module structure
2 Overview
22000OverviewOverview2-2.1Module structure2100Module structure2-][BA bersicht Aufbau
A module consists of
Electronic module and
Base module with
– Screw terminals or
– Cage clamp terminals
The base modules are the carrier units for the electronic modules and
are used to connect the field wiring. The electronic modules are inserted
on to the base modules and determine the module's function.
Details of the base modules that can be used are available in the chapter
entitled “Intended Use”.
2.1.1 Module features
Module features2-][Merkmale_Versorgung PS1
Power supply for max. 2.0 A
When the supply voltage is interrupted, the module supply is buffered
for 20 ms.
Separate infeed for periphery supply
Separate infeed for module supply
Infeed for C-rail supply
][Merkm ale_LED P S LEDs for:
–Modulesupply
– Periphery supply
– Module error
][Merkm ale_Zus atz Application range depends on the base module
][Geraetemerkmal_T Coated version of the module:
PSSu E F PS1-T: for increased environmental requirements
2.2 Front view
2 Overview
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
2-2
2.2Front view2200Front view2-BA Frontansicht
][BA_Frontansicht Legende Diag
Key:
A: Electronic module
B: Base module
1: LED for module diagnostics
2: Labelling strip with:
– Name of electronic module
– Order number
– Serial number
– Hardware version number
–2Dcode
3: Labelling strip for the terminal configuration on the base module
4: Name of electronic module
5: Connection level 1
6: Connection level 2
7: Connection level 3
8: Connection level 4
2111
2212
2313
Err
11 21
12
0V 22
0V
13 23
14
C24
C
PSSu E F
PS1
5 V 24V
0V24V
24V 24V
2414
PSSu E F
PS1
312191
000000
001
1
3
8
7
4
5
6
10
2
11
9
A
B
This manual suits for next models
1
Table of contents
Other Pilz Control System manuals
Pilz
Pilz PNOZmulti Mini User manual
Pilz
Pilz PNOZ m ES CC-Link User manual
Pilz
Pilz PMCprimo C2 User manual
Pilz
Pilz PSS u2 ES 16DOD 0.5A User manual
Pilz
Pilz PSS u2 ES 4DO R 8A User manual
Pilz
Pilz PNOZ m B0 Instruction Manual
Pilz
Pilz PSS67 IO1 16FDI User manual
Pilz
Pilz PSS 3032 User manual
Pilz
Pilz PSSu H m F DP ETH SD User manual
Pilz
Pilz PMCprimo C User manual
Pilz
Pilz PNOZ ms1p User manual
Pilz
Pilz PNOZ mmc11p User manual
Pilz
Pilz PSSu H PLC1 FS SN SD Series User manual
Pilz
Pilz PSSuniversal User manual
Pilz
Pilz PNOZ mm0.1p User manual
Pilz
Pilz PNOZ m ES 14DO User manual
Pilz
Pilz PNOZmulti Series User manual
Pilz
Pilz PNOZ ml1p User manual
Pilz
Pilz PNOZ mmc6p User manual
Pilz
Pilz PSS u2 ES 4DI User manual
