Phonak CROS II User manual

Phonak CROS solutions

February 2018

Desktop Fitting Guide

This guide provides you with a detailed introduction to fitting a Phonak CROS II or a Phonak CROS B system in Phonak Target

5.3and later. For fitting of the hearing instruments, please see the Hearing Instruments Desktop Fitting Guide.

Preparation of the hearing instruments

For the fitting of CROS II or CROS B it is recommended to use iCube II as it enables faster fine tuning and instant

demonstration of the CROS system.

CROS II can only be fit with Venture hearing instruments.

CROS B can only be fit with Belong™hearing instruments.

iCube II

No cables to the hearing instrument or CROS device are

needed. Insert batteries before placing the devices on the ear.

Turn on the devices by closing the battery compartment.

NOAHlink or HI-PRO

Connect the programing cables to the hearing instruments

and the fitting device. It is not possible to demonstrate the

CROS device with the cables connected.

Connect the instruments

Click [Connect] to start the fitting. The connected devices will appear

next to the fitting device in the dashboard.

The audiogram data from NOAH will be automatically imported into

Phonak Target and taken into account for the pre-calculation.

After the connection, select the correct acoustic parameters for your

hearing instruments.

Confirm that the correct fitting device is shown. To change the

fitting device, use the pull down arrow next to the fitting device

in the dashboard.

Phonak Target 5.3 | Phonak CROS solutions

Basic tuning

Go to the [Fitting] tab and run the feedback test. Once completed, fit

the hearing instrument as in a monaural fitting.

After fitting, go to the [Global tuning] tab and select [CROS Balance].

Adjust the loudness ratio between the CROS device and the hearing

instrument.

Device options

Click [Device options] to adjust the individual settings for the CROS volume / volume and program change (depending on the

user controls available).

For CROS II or CROS B, the volume of the CROS signal can be adjusted separately, if desired.

Finishing the fitting session

You can close the session at any time by clicking [Save & close session] in the top right corner of the screen. The save dialog

will confirm the successful save of the CROS fitting.

The wireless connection between the CROS transmitter and hearing aid starts automatically once both instruments have been

disconnected from the fitting device and turned on.

Important: When streaming from the accessories, the CROS streaming will be automatically disconnected.

Reconnection will also be automatic when you stop streaming of the accessory.

CROS fitting in Junior Mode

For more information, please see the Pediatrics Desktop Fitting Guide.

CE mark applied 2017

Sonova AG

Laubisrütistrasse 28

CH-8712 Stäfa

Switzerland

This manual suits for next models

Other Phonak Hearing Aid manuals

Phonak

Phonak Sky V 90 User manual

Phonak

Phonak Covert Wireless PTT AC User manual

Phonak

Phonak Savia Art 22 ITC/HS User manual

Phonak

Phonak Audeo User manual

Phonak

Phonak Roger On User manual

Phonak

Phonak Audeo M-R User manual

Phonak

Phonak ComPilot Air II Operating instructions

Phonak

Phonak KeyPilot2 User manual

Phonak

Phonak RemoteMic User manual

Phonak

Phonak Audeo M Series User manual

Phonak

Phonak Roger Pen User manual

Phonak

Phonak Dynamic SoundField User manual

Phonak

Phonak Lyric User manual

Phonak

Phonak Una User manual

Phonak

Phonak Brio 4 I User manual

Phonak

Phonak Phonito Nano User manual

Phonak

Phonak Audeo Yes User manual

Phonak

Phonak microSavia Art CRT User manual

Phonak

Phonak Exelia Art BTE User manual

Phonak

Phonak Lyric User manual

Phonak

Phonak Audio S YES User manual

Phonak

Phonak EasyCall User manual

Phonak

Phonak audeo B90-direct User manual

Phonak

Phonak Nathos S+ ITC W User manual

Popular Hearing Aid manuals by other brands

Sonic

Sonic Bliss miniBTE user guide

Lexie

Lexie B1 Replacement guide

Widex

Widex FM+DEX User instructions

Siemens

Siemens Triano user guide

Camplicomms

Camplicomms HC-200 user guide

Widex

Widex SUPER 220 S2-VSD user manual

Williams Sound

Williams Sound SoundPlus WIR 237 Manual and user guide

Oticon Medical

Oticon Medical Ponto SoundConnector Instructions for use

Siemens

Siemens Life micon user guide

Starkey

Starkey Destiny Operation manual

Audicus

Audicus The Icon instruction manual

Advanced Bionics

Advanced Bionics Slim HP Standard Instructions for use

Widex

Widex DREAM440 THE DREAM SERIES User instructions

NIKEN

NIKEN NK-401 instruction manual

ON Semiconductor

ON Semiconductor Ezairo 7111 Pre Suite Getting started guide

Sonetik

Sonetik GOHEAR user guide

Widex

Widex FL-9 User instructions

Siemens

Siemens MUSIC Pro Pro IT user guide