Philips M20 User manual
User Manual
Register your product and get support at:
www.philips.com/support
Corded phone
M20
1
Contents
1 Important safety
instructions 2
2 Your phone 2
What is in the box 2
Overview of the phone 3
3 Get started 4
1. Connect the base station 4
2. Install the handset 4
3. Set the date and time 4
4 Calls 5
Make a call 5
Normal call 5
Redial a call 5
Call from the call log 5
Query incoming calls 5
5
5 Settings 6
Adjust the volume 6
Set the brightness 6
Temporary time setting 6
6 Technical data 7
Screen dimensions 7
features 7
Weight and dimensions 7
7 Frequently asked
questions 7
No dialing tone 7
No voice from the receiver or
no voice transmission 7
The caller ID does not
display 7
2
1 Important safety
instructions
This product shall be used under
the conditions of not interfering
with legal radio stations
and being protected from
interference.
To avoid damage or
malfunction
Warning:
Avoid high temperature (60°C),
humid or corrosive environments.
NCC warning:
- This product shall be used
under the indoor conditions of
not interfering with legal radio
stations and being protected
from interference.
- Please use the product
appropriately to reduce the
waves.
2 Your phone
What is in the box
Base station
Coil cord
User Manual
Handset
Line cord
Guarantee
3
Overview of the phone
1 Handset
2 Outgoing call log
log.
3 Incoming call log
log.
4 Brightness
of the screen in on-hook
condition.
5 Recall
hook condition.
6 Speaker ( )
through the speaker.
7 Redial
8 Callback
9 Call transfer
10 Pause
11 Delete
you query incoming or
outgoing call logs. Press
and hold for 3s to delete all
incoming or outgoing call
logs.
dial a number.
12 Volume
13 Settings
14 Up/Down
15 LCD screen
16 Cable socket
4
3 Get started
1. Connect the base station
Connect each end of the line
cord to:
telephone socket on the
top of the base station
2. Install the handset
Connect each end of the coil
cord to:
bottom of the handset
side of the base station.
3. Set the date and time
. The screen
displays " ".
Press
After entering the date/time
settings screen, the year digit
starts to blink. Press to set
the year and then press
to set the day/hour/minute.
the setting.
Remarks
After the time and date are set,
the LCD screen automatically
displays the corresponding week.
5
4 Calls
Make a call
You can make a call in these
ways:
Normal call
1. Pick up the handset or press
.
2. Dial the phone number.
.
Redial a call
1. Pick up the handset.
2. Press . The most recent
outgoing call is dialed.
Call from the call log
1. Press to enter the
incoming call log.
2. Press to select a record on
the list.
3. The screen displays the
incoming call number, date,
and time.
4. Press or again to call
back.
1. Press to enter the
outgoing call log.
2. Press to query the latest
outgoing call number and
time.
3. Press or again to call
back.
Query incoming calls
1. Press to enter the
incoming call log.
2. Press to select a record on
the list.
3. The screen displays the
incoming call number, date,
and time.
Press .
6
5 Settings
Adjust the volume
Adjust the speaker
volume
You can set the speaker volume
in the following ways:
1. Press to enter the speaker
mode.
2. Press to adjust the
speaker volume. The speaker
volume is set to high upon
factory delivery.
Set the brightness
for selection.
1. In the on-hook condition,
press to adjust the
screen of the LCD screen.
Press this button continuously
The brightness is set to level
3 upon factory delivery.
2.
the setting.
Temporary time setting
1. Press to enter the
setting mode.
2. Press to select
"".
3. Press again to enter the
temporary time setting menu.
4. " " is displayed.
5. Press to set the time.
6.
the setting.
7
6 Technical data
Screen dimensions
Screen size: 3.3 inches
features
Speaker phone
Callback and redial
Call transfer or three-way
calling with the transfer button
in cooperation with switches
Weight and dimensions
Base station and handset:
539.0 grams
77.0 × 218.0 × 179.0 mm
(H × W × D)
7 Frequently
asked questions
No dialing tone
properly connected to the line
cord.
No voice from the receiver
or no voice transmission
properly connected to the
base through the coil cord.
The caller ID does not
display
Check with your service
provider.
withheld or unavailable.
without notice.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
and are used under license. This product has been manufactured by and is sold under the
Holding Limited is the warrantor in relation to this product.
M20B_90_UM_V1.0
Other manuals for M20
1
Table of contents
Other Philips Telephone manuals
Philips
Philips D1201B/TR Operator's manual
Philips
Philips SOPHO IPC 100 User manual
Philips
Philips D210 Product information sheet
Philips
Philips D700 Operator's manual
Philips
Philips D161 Operator's manual
Philips
Philips D126 Operator's manual
Philips
Philips CT6558 Quick start guide
Philips
Philips Onis 300 User manual
Philips
Philips D125 User manual
Philips
Philips Xenium X650 User manual
Philips
Philips VOIP3212S/05B User manual
Philips
Philips TD6120/SS051P User manual
Philips
Philips VOIP4331S/01 User manual
Philips
Philips VOIP8411B/05B User manual
Philips
Philips M455 Product information sheet
Philips
Philips DECT7272S/05 User manual
Philips
Philips DECT5154S/07 User manual
Philips
Philips XL490 User manual
Philips
Philips M5501WG/63 User manual
Philips
Philips DECT1224S/05 User manual
