Philips 107E User manual
1
E
N
Introduction
The 107E colour monitor displays sharp images of text and graphics
with a maximum resolution up to 1280x1024 pixels. It is optimal for
Windows, CAD / CAM / CAE, desktop publishing, spread sheets, multi-
media, and any other application which demands large screen size and
high resolutions.
This monitor automatically scans horizontal frequencies from 30KHz to
70KHz, and vertical frequencies from 50Hz to 130Hz. With
microprocessor based digital controlled circuit, the monitor can
automatically adjust itself to the video card’s scanning frequency and
displays an image with precise parameters you desire. The wide range
of scanning frequency supports variety of operating platforms, such as
IBM PC and compatibles.
Feature Highlights
•On-Screen-Display function provides more informations when the
user operates the control functions. This feature provides user-
friendliness and ease-of-use when operating the monitor.
•Anti-Glare and Anti-Static screen coating eliminate any bad effects
caused by the screen surface such as reflection of the room lights
and dust attraction.
•Green Design including automatic power saving function (NUTEK)
and low emission MPRII compliance shows our commitment in
environmental care.
•DDC1/DDC2B allows communication between the monitor and PC
system for optimal video configuration.
2
E
N
Note: If you experienced your monitor display is changing from color to
mono, it's possible that you are using a non-VESA-DDC-standard video
card. Please consult with your local PCEC dealer for more information.
ENERGY STAR is a U.S. registered mark.
As an ENERGY STAR®Partner, PCEC, has determined that this
product meets the ENERGY STAR®guidelines for energy efficiency.
IBM, IBM PC and Power PC are registered trademarks of International
Business Machines Corporation.
3
E
N
Safety precautions and maintenance
◆Disconnect the monitor from the mains supply if the monitor is not to
be used for an extended period of time.
◆Do not attempt to remove the back cover, as you will be exposed to
a shock hazard. The back cover should only be removed by qualified
service personnel.
◆Do not place objects on top of the monitor cabinet, which could fall
into vents or which could cover them and prevent proper cooling of
the monitor’s electronic devices.
Do not expose the monitor to rain or excessive moisture to avoid the
risk of shock or permanent damage to the set.
◆Do not use alcohol or ammonia based liquid to clean the monitor. If
necessary, clean with a slightly damp cloth. Disconnect the monitor
from the mains supply before cleaning.
◆Consult a service technician if the monitor does not operate normally
when operating instructions of this manual are followed.
Package
Your 107E package includes the following items:
• The monitor (integrated with tilt / swivel pedestal)
•Pedestal
•Power cord
• Interface cable (flying-in)
•Win95 driver disk
◆
End of life disposal
Your new set contains materials which can be recycled and reused.
Specialized companies can recycle your product to increase the amount
of reusable materials and to minimize the amount of materials to be
disposed of.
Please inform yourself on local regulations on disposal of your old set.
4
E
NInstallation
Important: Please refer to the user’s manuals of your computer
and video adapter to make sure these equipments are properly
installed and configured before installing the monitor.
Positioning / Ventilation
◆Avoid exposing the monitor to direct sunlight, stoves or any other
heat sources.
◆To prevent overheating, make sure that the ventilation openings of
the monitor are not covered.
◆Keep moisture and dust away.
◆Keep away from any magnetic objects, such as speakers, electric
motors, transformers, ...etc.
◆When positioning this monitor, make sure that the mains plug and
socket are easily accessible.
Pedestal
With the built-in pedestal you can tilt and / or swivel the monitor for a
most comfortable viewing angle.
MENU
EXIT
107 E
5
E
N
Connection
• Connect the monitor to the computer using the supplied interface
cables. Connection with computer system other than IBM PC may
need different type of adapters. Please consult your computer supplier
for these adapters. Connect the power cord to a wall outlet after the
interface cable is properly connected.
Important: Please make sure the AC power to your computer is
“OFF” before connecting or disconnecting any display
peripheral. Failure to do so may cause serious personal injury
as well as permanent damage to your computer equipments.
1) IBM PC connection
2) Mains connection
Monitor rear view
WARNING:SHOCK HAZARD-DO NOT OPEN
AVIS:RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
PRECAUCION RIESGO DE CHOQUE ELECTRICO,NO ABRIR
1
2
6
E
NControl locations and functions
Monitor control panel
Descriptions of knobs and keypads on front control panel
➀• Press this knob to switch ON and OFF of monitor’s power
➁• OSD rotary control knob.
➂• Active OSD menu.
√/ •Adjust contrast or the display.
➄ /•Adjust brightness or the display.
MENU
EXIT
➀➁➂➃➄
7
E
N
On-Screen-Display
Activating the On-Screen-Display
The monitor controls are accessed by pressing button to enable
OSD (On-Screen-Display). The main menu will be displayed as follows.
Each Function is selected by highlighting it via the tact key and pressing
button to confirm. To exit OSD, highlight press select button .
While operating Function, please use , to select or adjust and
press button to confirm.
Note: If adjustment or selection of any OSD menu is not made for more
than 10 seconds, the current setup will be saved and the OSD will
disappear automatically.
BRIGHTNESS & CONTRAST
●Brightness : Adjusts background brightness.
H:68.8KHz V:85Hz
70
CONTRAST
H:68.8KHz V:85Hz
70
BRIGHTNESS
8
E
N●Contrast :Adjusts contrast between foreground and background.
●EXIT : Save user adjustment and OSD disappear.
SIZE & POSITION
●Horizontal Size : Adjusts image width.
●Horizontal Position : Moves image left or right.
AA
AA
H:68.8KHz V:85Hz
70
CONTRAST
H:68.8KHz V:85Hz
70
H-SIZE
H:68.8KHz V:85Hz
70
H-CENTER
9
E
N
●Vertical Size : Adjusts image height.
●Vertical Position : Moves image up or down.
●EXIT : Save user adjustment and OSD disappear.
GEOMETRY
●Pincushion : Adjusts the amount of curvature on the vertical
edges.
●Trapezoid : Equalizes the length of the top and bottom edges.
A A
AA
A
A
AA
H:68.8KHz V:85Hz
70
V-SIZE
H:68.8KHz V:85Hz
70
V-CENTER
H:68.8KHz V:85Hz
70
PINCUSHION
H:68.8KHz V:85Hz
70
TRAPEZOID
10
E
N
A
A
●EXIT : Save user adjustment and OSD disappear.
●PIN-BALANCE : Adjust picture curves outwards or inwards.
A A
●PARALLEL : Adjust for optimal parallelogram screen picture.
AA
COLOR TEMPERATURE
●9300°K : Factory preset color temperature of 9300°K.
●6500°K : Factory preset color temperature of 6500°K.
●Rotation : Tilts the image clockwise or counter-clockwise.
H:68.8KHz V:85Hz
70
ROTATION
H:68.8KHz V:85Hz
70
PIN BALANCE
H:68.8KHz V:85Hz
70
PARALLELOGRAM
H:68.8KHz V:85Hz
RECALL
9300K COLOR
TEMPERATURE
H:68.8KHz V:85Hz
RECALL
6500K COLOR
TEMPERATURE
Other manuals for 107E
3
This manual suits for next models
3
Table of contents
Other Philips Monitor manuals
Philips
Philips 190S7 User manual
Philips
Philips 42PFL4755/V7 User manual
Philips
Philips 150S4FB User manual
Philips
Philips 220E1SB User manual
Philips
Philips Brilliance 500P30 User manual
Philips
Philips 221E2SB/00 User manual
Philips
Philips 233V5LSB User manual
Philips
Philips 273E3LSW/93 User manual
Philips
Philips 241B4PYCS/00 User manual
Philips
Philips 241B8 User manual
Philips
Philips EVNIA 42M2N8900/94 User manual
Philips
Philips 75BDL3003H User manual
Philips
Philips 241E9 User manual
Philips
Philips 202P User manual
Philips
Philips 200P7 Guide
Philips
Philips 226V4L User manual
Philips
Philips 273V7QDSB/74 User manual
Philips
Philips 190SW9 User manual
Philips
Philips 4BM2790 User manual
Philips
Philips Brilliance 200P7EB User manual
