Philips 150P3A User manual
FCC ID: A3KM108
Product Information
Product Features •Technical Specifications •Resolution & Preset
Modes •Philips Pixel Defect Policy •Automatic Power Saving •
Physical Specification •Pin Assignment •Product Views •Physical
Function
Product Features
150P3A / 150P3C
Ultra Slim Frame
l15-inch color LCD monitor with excellent display performance
lStereo 48W PMPO (2 x 2W RMS)
lDual input- accepts both DVI Digital and VGA analog inputs
lEmbedded universal AC power supply
lAdjustable viewing height
lPortrait and landscape display
lAUTO adjustment optimizes picture quality
lUser installable bezel for optional protective cover choice
lOptional USB hub
RETURN TO TOP OF THE PAGE
Technical Specifications*
LCD PANEL
•Type TFT LCD
•Screen size 15" visual
•Pixel Pitch 0.297 x 0.297mm (15.0")
•LCD Panel type
1024 x 768 pixels
R.G.B. vertical stripe
Anti-glare polarizer hardness
•Effective viewing
area 304.1 x 228.1mm (15.0")
•Display Colors 16.7M colors
SCANNING
•Vertical refresh
rate 56Hz-76Hz
•Horizontal
30KHz-61KHz
Exhibit 3
Installstion and Operating instructions
FCC ID: A3KM108
•Horizontal
frequency
30KHz-61KHz
VIDEO
•Video dot rate 80 MHz
•Input impedance
-
Video 75 ohm
-
Sync 5K6 ohm
•Input signal levels 700m Vpp
•Sync input signal
Separate sync
Composite sync
Sync on Green
•Sync polarities Positive and negative
•Input Frequency
XGA Hsync 48- 61 KHz, Vsync 60 - 76 Hz (N.I.)
SVGA Hsync 35- 50 KHz, Vsync 56 - 75 Hz (N.I.)
VGA Hsync 31- 38 KHz, Vsync 60 - 76 Hz (N.I.)
•Video interface Dual input: Both Analog (D-Sub) and DVI-D
(Digital only) are available. It can be switching
via OSD selection.
AUDIO
•Input signal level 0.7 Vpp
•Headphone out
signal level 32 Ohm 20+20mW
•Input signal
connector 3.5mm mini jack
•Loudspeaker 2+2W stereo front firing (PMPO: 48W)
MICROPHONE
•Sensitivity -55dB re 1V/ubar at 1KHz
•Output
impedance 2.2K Ohm max.
•Directivity -5dB at 180°
•Frequency range 300Hz-3KHz
OPTICAL CHARACTERISTICS
•Contrast ratio 350 (typ.)
•Brightness 250 cd/m2(typ.)
•Peak contrast
angle 6 o'clock
•White
x: 0.281 y: 0.311 (at 9300°K) x: 0.312 y: 0.338
FCC ID: A3KM108
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Resolution & Preset Modes
RETURN TO TOP OF THE PAGE
•White
Chromacity
x: 0.281 y: 0.311 (at 9300°K) x: 0.312 y: 0.338
(at 6500°K)
•Viewing Angle
(C/R >5)
Upper >50°(typ.)
Lower >60°(typ.)
Left >75 °(typ.)
Right >75 °(typ.)
•Response time <=30ms (typ.)
•Maximum 1024 x 768 at 75Hz
•Recommended 1024 x 768 at 60Hz
14 user definable modes
14 factory preset modes:
H. freq (KHz) Resolution V. freq (Hz)
31.469 640*350 70.086
31.469 720*400 70.087
31.469 640*480 59.940
35.000 640*480 67.000
37.861 640*480 72.809
37.500 640*480 75.000
35.156 800*600 56.250
37.879 800*600 60.317
48.077 800*600 72.188
46.875 800*600 75.000
49.700 832*624 75.000
48.363 1024*768 60.004
56.476 1024*768 70.069
60.023 1024*768 75.029
FCC ID: A3KM108
Automatic Power Saving
If you have VESA's DPMS compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when not in use. And if
an input from a keyboard, mouse or other input device is detected, the monitor will
automatically "wake up". The following table shows the power consumption and
signaling of this automatic power saving features:
RETURN TO TOP OF THE PAGE
Physical Specifications
* These information are subject to change without notice.
RETURN TO TOP OF THE PAGE
Power Management Definition
VESA
Mode Video H-
sync V-
sync Power
Used LED
color
ON Active Yes Yes < 30W Green
Stand-by Blanked No Yes < 2W Amber
Suspend Blanked Yes No < 2W Amber
OFF Blanked No No < 2W Amber
This monitor is ENERGY STAR®compliant. As an ENERGY STAR®
Partner, PHILIPS has determined that this product meets the ENERGY
STAR®guidelines for energy efficiency.
•Dimension (WxHxD) * 343 x 354 x 179 mm (incl. Pedestal)
•Weight * 4.6 Kg
•Swivel +/ - 175°
•Portrait display 90°rotation counter clockwise
•Tilt (Forward /
Backward) - 5°/ 25°
•Power supply 100 —240 VAC, 50/60 Hz
•Power consumption 23 W (typ.)
•Temperature (operating) 5°C to 40°C
•Relative humidity 20% to 80%
•System MTBF 50K hrs (CCFL 40Khrs)
•Cabinet color 150P3A: Light Gray
150P3C: Black
FCC ID: A3KM108
Pin Assignment
1. The digital only connector contains 24 signal contacts organized in three rows of
eight contacts. Signal pin assignments are listed in the table:
2. The 15-pin D-sub connector (male) of the signal cable:
Pin
No.
Signal
Assignment
Pin
No.
Signal
Assignment
Pin
No. Signal
Assignment
1T.M.D.S.
Data2-9T.M.D.S.
Data1- 17 T.M.D.S.
Data0-
2T.M.D.S.
Data2+ 10 T.M.D.S.
Data1+ 18 T.M.D.S.
Data0+
3T.M.D.S.
Data2/4 Shield 11 T.M.D.S.
Data1/3 Shield 19 T.M.D.S.
Data0/5 Shield
4No connect 12 No connect 20 No connect
5No connect 13 No connect 21 No connect
6DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7DDC Data 15 Ground (for
+5V) 23 T.M.D.S.
Clock+
8No connect 16 Hot Plug Detect 24 T.M.D.S.
Clock-
Pin
No.
Assignment
Pin
No.
Assignment
1Red video input
9DDC +5V
2Green video input 10 Logic ground
3Blue video input 11 Identical output -
connected to pin 10
4Identical output -
connected to pin 10 12 Serial data line
(SDA)
5Cable detect 13 H. Sync / H+V
6Red video ground 14 V. Sync
7Green video ground 15 Data clock line
(SCL)
FCC ID: A3KM108
RETURN TO TOP OF THE PAGE
Product Views
Follow the links to see various views of the monitor and its components.
Front View Product Description
RETURN TO TOP OF THE PAGE
Physical Function
8Blue video ground
1) Tilt
2) Swivel
3) Height
adjustment
FCC ID: A3KM108
4) Portrait display
Turn monitor from landscape view to portrait view
4.1) Tilt the monitor body at an angle
4.2) Rotate the monitor body 90 degrees counter
clockwise.
FCC ID: A3KM108
Installing your LCD Monitor
Your LCD Monitor : Front View Product Description •Connecting to
Your PC •Remove and Re-install the Base •Getting Started •
Optimizing Performance •Accessories (optional)
Front View Product Description
UP and DOWN buttons are used when adjusting the
OSD of your monitor
LEFT and RIGHT buttons, like the UP and DOWN
buttons, are also used in adjusting the OSD of your
monitor.
BRIGHTNESS hotkey. When the UP and DOWN
arrow buttons are pressed, the adjustment controls for
the BRIGHTNESS will show up.
OK button which when pressed will take you to the
OSD controls
POWER button switches your monitor on
Automatically adjust the horizontal position, vertical
position, phase and clock setting.
FCC ID: A3KM108
RETURN TO TOP OF THE PAGE
Side View
RETURN TO TOP OF THE PAGE
Rear View
1. Audio power on/off and volulme adjustment
2. Audio power LED
3. Mute on/off
1. Headphone Jack
2. Microphone Jack
FCC ID: A3KM108
RETURN TO TOP OF THE PAGE
Optimizing Performance
lFor best performance, ensure that your display settings are set at
1024x768@60Hz (for14"/15") or 1280x1024, 60Hz (for17"/18").
1. Audio in
2. Mic out
3. DC 12V in
1. AC power in
2. DC 12V out for Philips Multimedia Base
only
3. D-SUB Connector
4. DVI-D Connector
Note: You can check the current display settings by pressing
the "OK" button once. Go into the Product Information. The
current display mode is shown on the item called
RESOLUTION.
Other manuals for 150P3A
2
This manual suits for next models
1
Table of contents
Other Philips Monitor manuals
Philips
Philips Brilliance 109P User manual
Philips
Philips 150B4CG User manual
Philips
Philips 243S7 User manual
Philips
Philips 170S9FB/05 User manual
Philips
Philips 190SW8FS User manual
Philips
Philips 107S56 User manual
Philips
Philips 150S8FBJ/78 User manual
Philips
Philips 231P4UPES/00 User manual
Philips
Philips 190X7 User manual
Philips
Philips SmartControl Lite 233V5QSBP/75 User manual
Philips
Philips 240BW8 Series User manual
Philips
Philips 190X6FB User manual
Philips
Philips Signage Solutions 55BDL3202H User manual
Philips
Philips 230W5VS User manual
Philips
Philips BDL4221V/27 User manual
Philips
Philips 170C6FS/00 User manual
Philips
Philips 43BFL2214/97 User manual
Philips
Philips 30PW8402 User manual
Philips
Philips Brilliance 241B8QJEB/94 User manual
Philips
Philips L Line 41BDL7531L User manual
