Philips VL72 User manual

OUT TO SUPPLY WIRES

SEE NOTE 3

STREET SIDE LABEL

SEE NOTE 5

POLE FASTENERS

SEE NOTES 2 & 6

INSTALLATION:

TURN POWER OFF.

2) Loosen pole fasteners on pod, if required.

3) Make fixture wiring connections to supply wires (by others)

- White to White

- Black to Black

- Green to Green

NOTE:

Both green ground wires from fixture should be

"bugged" together with incoming supply wire.

4) Slip luminaire post fitter onto pole and ensure wires

are not being pinched.

5) Orient by turning luminaire "street side" via label

supplied on globe fitter (pod).

6) Torque pole fasteners as follows to 7 ft. lbs.

CAUTION!

Over torquing of screws may lead to

damage or fatique of fastener.

7) Power to luminaire may now be turned on.

32002016, revision A

INSTALLATION INSTRUCTIONS:

VL71 & VL72

(Fixture)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER BEFORE PERFORMING ANY MAINTENANCE!

Ensure that the AC service is OFF before any installation or maintenance.

Do not switch service to ON until the entire installation is complete.

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-5/32" Allen Wrench/Driver

-Torque Wrench capable of 7 ft. lbs. torque

This fixture is intended for installation in accordance with the National Electrical Code and local code

specifications. Failure to adhere to these codes and instructions may result in serious injury and/or damage to

the fixture components and void the warranty. These instructions do not purport to cover all details or vairations

in equipment, nor to provide for every possible contingency related to installation, operation, maintenance, or

mounting situation. Should specific problems occur that are not addressed by these instructions, contact your

Sales Representative or distributor for assistance. Retain these instructions for future reference.

POD

(EXISTING)

LOOSEN FASTENERS

TO REMOVE GLOBE

(EXISTING)

CAMDEN ADAPTER

(NEW)

1/4-20 SCREWS

(NEW)

ECOSWAP ASSY

(NEW)

INSTALLATION:

TURN POWER OFF.

2) Loosen, but do not remove (4) globe fasteners on pod.

3) Lift globe from fixture.

4) Remove existing ballast assembly.

- Push spring clip to release ballast module, twist ballast

module counter-clockwise, and lift to remove.

- Disconnect blue power quick disconnect.

5) Remove ballast assembly ring by removing existing screws.

6) Remove terminal block and bracket (if applicable)

7) Assemble Ecoswap to camden adapter by twisting

clockwise until spring clip snaps into place.

8) Make proper wiring connections.

NOTE:

In many cases, you may need to remove existing

blue power disconnect to "bug" wires.

9) Install entire unit onto fixture with (2) 1/4-20 screws while

ensuring wires are not being pinched.

NOTE:

For Type 3 distribution modules, rotate to orient

"Street Side (SS)" identification located on

Ecoswap, toward street.

10) Carefully lower globe onto fixture.

11) Tighten (4) globe fasteners to secure globe.

REFERENCE:

Please see enclosed Power Selection drawing

to adjust wattage output of Ecoswap module.

32002016, revision A

INSTALLATION INSTRUCTIONS:

V71 & V72

(Retrofit)

SAFETY WARNING:

ALWAYS TURN FIXTURE OFF/DISCONNECT POWER AND ALLOW

TO COOL BEFORE PERFORMING ANY MAINTENANCE

Philips Lighting Company

200 Franklin Square Drive

Somerset, NJ 08873

Phone (US): 855-486-2216

Phone (CAN): 800-668-9008

TOOLS REQUIRED:

-1/2" Socket/Driver

-5/32" Allen Wrench/Driver

-Philips Head Screw Driver

This manual suits for next models

Table of contents

Other Philips Light Fixture manuals

Philips

Philips Lytespan 7599 User manual

Philips

Philips 69118-31-PH User manual

Philips

Philips GreenPerform RC160V User guide

Philips

Philips IS_CCM User manual

Philips

Philips 33610-11-16 User manual

Philips

Philips Calculite C4X9LEDLW User manual

Philips

Philips Hue Play User manual

Philips

Philips iColor Accent Powercore User manual

Philips

Philips Lytecaster 1004ICV User manual

Philips

Philips 6914196PH Manual

Philips

Philips Selecon ARENA Series User manual

Philips

Philips 37951-17-16 User manual

Philips

Philips hue User manual

Philips

Philips Fortimo LEDFlex S User manual

Philips

Philips GreenSpace Accent Elbow RS342B User manual

Philips

Philips ProSpec 37B70E User manual

Philips

Philips GreenPower LED toplighting Series User manual

Philips

Philips Lightolier MJ5 User manual

Philips

Philips EG1-9 User manual

Philips

Philips Skyway SKS2GPK2FT User manual

Philips

Philips Calculite C4T4GA-MHT4RF User manual

Philips

Philips 6914153PH Manual

Philips

Philips Lightolier QCE2X4PFOS User manual

Philips

Philips IS-LPW User manual

Popular Light Fixture manuals by other brands

Emos

Emos CLASSIC ZY1431T manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch

Triarch 31083 Assembly instructions

IKEA

IKEA TIVED Assembly instructions

Lightolier

Lightolier LP200 specification

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline

Stageline ODW-2410RGBW instruction manual

Light Sky

Light Sky Tornado Series user manual

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Calculite CS8226 specification

ArtFox

ArtFox Beam 15R extreme manual