Philips HP6502/00 User manual

Satinelle Ice Premium

HP6502, HP6501

1111

HP6502,HP6501

ENGLISH 6

FRANÇAIS 17

한국어 29

ภาษาไทย 40

繁體中文 49

简体中文 59

Introduction

With your new Satinelle ICE PREMIUM you can remove unwanted hairs

quickly, easily and effectively.The combination of the ceramic epilating

system with the contour-following skin cooler and the new

sonic massaging system constitutes a revolution in epilation.Thanks to the

natural numbing effect of ice and massaging, the new Satinelle ICE

PREMIUM makes epilation more comfortable and less painful than ever.

The result is a silky-smooth skin and a hair growth reduction of up to

50%, assuming you use the appliance regularly (every 4 weeks).

The rapidly rotating epilating discs catch even the shortest hairs (down to

0.5 millimetre!) and pull them out by the roots. As a result, your skin stays

smooth for up to four weeks and regrowth is soft and downy.

General description (Fig. 1)

ASensitive area cap

BMassaging element

CEpilating head

DRelease button

EAppliance

FOn/off slide

GProtective cap of shaving head (HP6502 only)

HShaving head (HP6502 only)

ILeg skin cooler with pivoting cooling head

JInsulating sleeve for skin cooler

KAdapter

LExfoliating body puff

MCleaning brush

Important

Read this user manual carefully before you use the appliance and save it

for future reference.

Check if the voltage indicated on the adapter corresponds to the

local mains voltage before you connect the appliance.

Only use the appliance in combination with the adapter supplied.

ENGLISH

Do not use the appliance if the adapter or the appliance itself is

damaged.

If the adapter is damaged, always have it replaced with one of the

original type in order to avoid a hazard.

The adapter contains a transformer. Do not cut off the adapter to

replace it with another plug, as this causes a hazardous situation.

Keep the appliance and the adapter dry.

Keep the appliance out of the reach of children.

Do not expose the appliance to temperatures lower than 5°C or

higher than 35°C.

To prevent damage and injuries, keep the running appliance away

from your scalp hair, eyebrows, eyelashes, clothes, threads, cords,

brushes etc.

Do not use the epilating head on irritated skin or skin with

varicose veins, rashes, spots, moles (with hairs) or wounds without

consulting your doctor rst. People with a reduced immune

response or people who suffer from diabetes mellitus, Raynaud’s

disease or immunodeciency should contact their doctor rst.

Always check the shaving head before you use the appliance. Do

not use the shaving head if the foil or the trimmers are damaged, as

this may cause injury.

Electromagnetic elds

This Philips appliance complies with all standards regarding

electromagnetic elds (EMF). If handled properly and according to

the instructions in this user manual, the appliance is safe to use based on

scientic evidence available today.

Preparing for use

Freezing the skin cooler

1 Put the skin cooler WITHOUT the insulating sleeve in the freezer

or freezing compartment (***) at least 4 hours before you start to

epilate. When the uid has turned completely blue, the skin cooler

is ready for use.

ENGLISH 7

Make sure the outside of the skin cooler is completely dry before you

freeze it.

Tip:You can store the skin cooler in the freezer permanently.

Using the appliance

General information about epilation

Epilation is easier just after a bath or shower. Make sure your skin

is completely dry when you start to epilate.

When you use the appliance for the rst time, we advise you to try

it out on an area with only light hair growth.This helps you get

accustomed to the epilation process.

For optimal epilating results, the hairs should not be longer than 10

millimetres (Fig. 2)

To epilate longer hairs: (Fig. 2)

shorten the hairs to a maximum length of 10mm with a trimmer. In

this case, you can start to epilate right away.

shave the hairs completely. In this case you can start to epilate after a

few days (the hairs must be at least 0.5mm long).

Your skin may become a little red and irritated the rst few times

you use the epilator.This phenomenon is absolutely normal

and quickly disappears.As you use the appliance more often, your

skin gets used to epilation, skin irritation decreases and

regrowth becomes thinner and softer. If the irritation has not

disappeared within three days, we advise you to consult a doctor.

We advise you to epilate before you go to bed at night, as

this allows any skin irritation that may develop to diminish

overnight.

Epilating with the skin cooler

Make sure your skin is clean, entirely dry and free from grease. Do not

use any cream before you start to epilate.

1 Slide the insulating sleeve onto the skin cooler. (Fig. 3)

ENGLISH8

The insulating sleeve prevents an unpleasant sensation of coldness in your

hand while you use the appliance. It also keeps the skin cooler cold as

long as possible.

Sometimes the pivoting cooling head freezes onto the skin cooler and

does not move when you take the skin cooler from the freezer.The

pivoting cooling head starts to pivot again after you have passed it over

your leg a few times.

2 Snap the appliance onto the skin cooler (Fig. 4).

3 Insert the appliance plug into the bottom of the appliance and put

the adapter in the wall socket.

4 Select the desired speed to switch on the appliance (Fig. 5).

Select speed I for areas with little hair growth and for areas where bones

are located directly beneath the skin, such as knees and ankles.

Select speed II for larger areas with stronger hair growth.

5 Stretch your skin with your free hand to make the hairs stand

upright.

6 Place the appliance perpendicularly onto the skin with the epilating

head pointing forward. Move the appliance against the direction of

hair growth at a moderate speed. (Fig. 6)

Make sure both the epilating discs and the skin cooler are in proper

contact with the skin.

Press the appliance lightly onto the skin.

If you are not completely satised with the epilation result, try

moving the epilator more slowly over your skin.

7 Use the tab on the bottom end of the appliance to remove the

appliance from the skin cooler (Fig. 7).

Epilating without skin cooler

If you do not want to use the skin cooler, for instance because you

have grown accustomed to the sensation of epilation, you can also

use the appliance without the skin cooler.

Make sure that you place the epilator perpendicularly onto your

skin and that you move it against the direction of hair growth.

ENGLISH 9

Epilating the underarms and bikini line

Your epilator comes with a sensitive area cap that reduces the number of

active epilating discs.This makes the appliance ideal for epilating the more

delicate areas of the body, such as the underarms and bikini line.

Note:You get the best results when the hairs are not too long (max.1cm).

1 Put the sensitive area cap on the epilating head (Fig. 8).

The sensitive area cap can only be tted onto the appliance in one way.

2 Switch on the appliance by selecting the desired speed. (Fig. 5)

We advise you to use speed II.

3 Stretch the skin with your free hand.

4 Place the appliance perpendicularly onto your skin, with the on/off

slide pointing in the direction in which you are going to move the

appliance (Fig. 6).

5 Move the appliance slowly over the skin, against the direction of

the hair growth (Fig. 6).

Epilate your bikini line as shown in the gure (Fig. 9).

Epilate your underarms as shown in the gure (Fig. 10).

For a cool sensation, you can dab the area you have just epilated with

a cloth soaked in cold water.

6 Remove the sensitive area cap from the epilator after use (Fig. 11).

Using the exfoliating body puff

Use the exfoliating body puff in the shower.

Regular massages with the puff may help to prevent ingrown hairs. Do

not use the puff immediately before or after epilation.

Shaving (HP6502 only)

You can use the shaving head to shave sensitive body parts, such as your

underarms and bikini line.With the shaving head, you obtain a smooth

result in a comfortable and gentle way.

1 Make sure the appliance is switched off.

ENGLISH10

This manual suits for next models

Table of contents

Languages:

Other Philips Epilator manuals

Philips

Philips SatinPerfect HP6576/50 User manual

Philips

Philips Lumea Prestige BRI956 User manual

Philips

Philips Lumea Prestige BRI946 User manual

Philips

Philips SatinPerfect HP6570 User manual

Philips

Philips HP6519/01 User manual

Philips

Philips BRE620/10 User manual

Philips

Philips HP6608 User manual

Philips

Philips BRE710/00 User manual

Philips

Philips Lumea SC2009 User manual

Philips

Philips Flirt HP6406/00 User manual

Philips

Philips ICE PREMIUM HP6503 User manual

Philips

Philips Lumea BRI858/04 User manual

Philips

Philips SC1982/00 User manual

Philips

Philips HP6483 User manual

Philips

Philips HP6574/00 User manual

Philips

Philips Lumea SC1992 User manual

Philips

Philips HP6608/01 User manual

Philips

Philips Satinelle Ice Premium HP6501 User manual

Philips

Philips Lumea BRI955 User manual

Philips

Philips HP6609/01 User manual

Philips

Philips HP6523 Operating manual

Philips

Philips BRL140 User manual

Philips

Philips Lumea BRI940 User manual

Philips

Philips HP6473/01 User manual

Popular Epilator manuals by other brands

Braun

Braun FaceSpa 851V manual

Panasonic

Panasonic ES2082P operating instructions

Braun

Braun Silk épil 5 manual

Livoo

Livoo DOS194 user manual

Panasonic

Panasonic ES2082 operating instructions

Panasonic

Panasonic ES-WU11 Service manual

Braun

Braun Silk epil EverSoft 2550 user manual

Grundig

Grundig LE 6820 manual 

Rio

Rio Evolution user guide

Braun

Braun EN 10 Series use instructions

no!no!

no!no! PR03 user manual

D Light

D Light PRO Ultra user manual

Panasonic

Panasonic ES-WD92 Service manual

Panasonic

Panasonic ES-WS20 operating instructions

Kooper

Kooper 2175882 User instructions

Braun

Braun Silk-epil 5316 manual

Panasonic

Panasonic ES-WD10 operating instructions

Panasonic

Panasonic ES2056 operating instructions