Philips Respironics 1126218 User manual

Lithium ion battery with

integrated uninterruptible

power supply (UPS)

PAP battery kit

1126218 R03

LZ 5/12/2016

1126218

Respironics Inc.

1001 Murry Ridge Lane

Murrysville, PA 15668 USA

Respironics Deutschland

Gewerbestrasse 17

82211 Herrsching, Germany

Manufactured for:

Li Ion Battery Pack

EN 001 INSTRUCTIONS FOR USE

FR 014 MODE D’EMPLOI

IT 028 ISTRUZIONI PER L’USO

DE 042 GEBRAUCHSANWEISUNG

ES 056 INSTRUCCIONES DE USO

PT 070 INSTRUÇÕES DE UTILIZAÇÃO

PT-BR 084 INSTRUÇÕES DE USO

NL 098 GEBRUIKSAANWIJZING

SV 112 BRUKSANVISNING

FI 125 KÄYTTÖOHJEET

NO 139 BRUKSANVISNING

PL 152 INSTRUKCJA STOSOWANIA

CS 166 NÁVOD K POUŽITÍ

HE 179

TR 192 KULLANIM TALİMATLARI

AR 205





1 Intended Use

The Lithium Ion (Li Ion) Battery Pack is an accessory intended to supply power to speciﬁed

Philips Respironics sleep therapy and noninvasive ventilation devices. The Li Ion Battery

Pack is intended to be used in home, hospitals, and institutions.

The Li Ion battery Pack is compatible with the following Philips Respironics sleep therapy

devices and noninvasive ventilation devices:

• DreamStation CPAP and BiPAP sleep therapy devices

• System One CPAP and BiPAP sleep therapy devices

• Dorma sleep therapy devices

• BiPAP AVAPS and BiPAP S/T noninvasive ventilation devices

The Li Ion Battery Pack is referred to as“the battery pack”throughout the remainder of

these instructions.

2 Package Contents

A Battery pack

B Cable

C Adapters

D Instructions for Use

E Carry case

Li Ion Battery Pack

Instructions For Use - e

3 Warnings and Cautions

Warnings

A warning statement highlights a scenario where personal injury may occur.

•This Instructions for Use document does not cover operation of your DreamStation,

Dorma, System One, BiPAP AutoSV, BiPAP AVAPS, or BiPAP S/T therapy device. When using

the battery pack with a therapy device, refer to the individual Instructions for Use provided

with each therapy device.

•Periodically inspect the power cord for damage or signs of wear. Discontinue use and

replace if damaged.

•Before use, inspect the battery pack for any damage such as a cracked or broken

enclosure. Inspect the cables to ensure that no bare wires are showing. If you notice any

unexplained changes in the performance of the battery pack, discontinue use and contact

Philips Respironics.

•To avoid strangulation hazards, ensure that all cords connected to the battery pack are

properly routed.

•This product contains small parts which can cause choking hazards.

•Do not submerge the battery pack in water or any other liquid.

•Do not use any accessories, detachable parts, or materials not recommended by

Philips Respironics. Do not connect the battery pack to any equipment not listed in this

Instructions for Use document. Incompatible parts or accessories can result in degraded

performance.

•Use only power cords and power supplies supplied by Philips Respironics for this battery

pack. Use of power cords not supplied by Philips Respironics may cause overheating or

damage to the battery pack and may result in increased emissions or decreased immunity

of the equipment or system.

•Use only approved cables and accessories with your battery pack. Misuse may aﬀect

electromagnetic compatibility (EMC) performance and should be avoided. The device

should not be used while stacked or in close approximation to other non-approved

devices.

•Do not attempt to modify the battery pack in any way.

Cautions

A caution statement highlights a scenario where damage to the battery pack or other

equipment may occur.

•Do not place the battery pack in or on any container that can collect or hold water.

•Ensure that the therapy device is properly secured if it is being used in a portable

environment.

•Do not expose the battery pack to extreme temperatures (see the Specications section

for temperature speciﬁcations). If the battery pack becomes very hot or very cold, allow it

to come to room temperature before using.

•There are no user-serviceable parts inside of the battery pack; therefore, do not attempt

to disassemble or repair it.

•Do not use any cleaning products other than the products listed in this document. Use

of other products may damage or shorten the life of your battery pack.

•Medical electrical equipment needs special precautions regarding EMC and needs to

be installed according to the EMC Information section. Contact your home care provider

regarding EMC installation information.

•Mobile RF communications equipment can aﬀect medical electrical equipment.

•Do not touch the pins or connectors.

4 Symbols

The following symbols may appear on the battery pack and accessories:

Note: If the battery pack will be used for airline travel, please consult the airline restrictions

(e.g., number of spare batteries permitted). Please familiarize yourself with airline rules.

Symbol Description Symbol Description

Li Ion battery Caution, consult

accompanying

documents.

Separate collection for

electrical and

electronic equipment

per EC Directive

2012/19/EU.

For Airline Use.

Complies with RTCA/

DO-160G section 21,

category M.

Consult accompanying

instructions for use. IP22 Drip Proof Equipment

5 Before Use

How to Contact Philips Respironics

Should you experience trouble with this equipment or require assistance setting up,

using, or maintaining the battery pack, please contact your home care provider. If you

need to contact Philips Respironics directly, call the Philips Respironics Customer Service

department at 1-724-387-4000 or +49 8152 93060. You can also use the following

addresses:

Respironics, Inc.

1001 Murry Ridge Lane

Murrysville, PA 15668, USA

Respironics Deutschland

Gewerbestrasse 17

82211 Herrsching, Germany

Preparing the Battery Pack for First Use and Recharging

1. Remove the battery pack, adapters, and cables from the packaging.

Note:Retain your packaging in case you ever need to return your battery pack to Philips

Respironics.

Note:A power supply is not included in the package with your battery pack. Use the

power supply provided with your therapy device.

2. Plug the power supply provided with your therapy device into an AC outlet. a

3. Plug the other end of the power supply into the battery pack. The battery pack will

begin to charge automatically. b

a b

4. The battery pack LED display will momentarily light up to show the charge level. The

ﬁrst time it is turned on, the battery pack will not be fully charged. c

Note: Before using the battery pack for the ﬁrst time, you must plug it in until it is fully

charged. This may take up to 3 hours.

5. Once the battery pack is fully charged, it is ready to use with your therapy device.

Indicators and Buttons

Push Button

The push button is located on the LED display of the battery pack. Push the button in

completely to check the charge level. d

LED Display

The battery pack uses ﬁve green LED lights to indicate the battery pack charge level. The

LEDs will be in one of three modes: steady , blinking , or oﬀ .

Discharging Charging

LED Battery Pack

Charge

LED Battery Pack

Charge

81%–100% 0%–20%

61%–80% 21%–40%

41%–60% 41%–60%

21%–40% 61%–80%

11%–20% 81%–99%

1%–10% 100%

0% See Troubleshooting

section below.

Troubleshooting

1. If you are attempting to charge your battery pack after it is completely depleted, it may

take a few moments for the LEDs to light up. If your battery pack is plugged in and no

lights are displayed, wait 3 to 5 minutes and press the button again.

2. If the LEDs still do not light up after attempting Step 1, your battery pack may have

been damaged or may need to be replaced. Contact Philips Respironics.

6 Operation

Using the Battery Pack with a Therapy Device

After charging, your battery pack is ready to use. It can either be disconnected from

the power supply and used as an external battery pack (standalone mode), or remain

plugged into the power supply and outlet for a continuous, fully charged battery pack

(uninterruptible power supply (UPS) mode).

Note: The ﬁrst time you charge your battery pack, it must be charged in accordance with

the Before Use section. After the ﬁrst charge is completed, the battery pack will charge

while connected in UPS mode.

Uninterruptible Power Supply Mode

To use the battery pack in UPS mode, keep it plugged into the power source and

connected to an outlet. This will allow you to use the battery pack continuously without

losing any charge.

Note: In order for your therapy device to detect what power is available, it is important to

connect the components in the proper order.

1. Plug the power supply into an AC outlet. e

2. Plug the other end of the power supply into the battery pack f and wait for the LEDs

to stop blinking.

3. Connect the therapy device cable to the battery pack. The therapy device cable should

correspond to the therapy device you are using.

• Some therapy devices require adapters to connect to the device cable. To use the

adapter, connect it to the end of device cable and then plug the adapter end directly

into your therapy device. g

• For the majority of therapy devices, the white therapy device cable can be connected

directly into the therapy device without the use of adapters. h

g h

4. Insert the strap attached to the cable through the slot in the battery pack. Pull it

through and under the battery pack. i

5. Wrap the strap around the therapy device cable, and secure it by pressing the hook side

of the strap against the loop side. j

6. Connect the other end of the therapy device cable into the device.

7. The battery pack will automatically begin providing power to the therapy device. k

Standalone Mode

After the battery pack is charged, disconnect it from the power supply. It can now be used

with your therapy device as an external battery pack.

1. Ensure that the battery pack is charged. To conﬁrm, completely push in the push button

located on the LED display of the battery pack. All of the LEDs should be steadily lit.

2. Complete Steps 2 through 6 of the Uninterruptible Power Supply Mode section. l

Note: Humidiﬁcation is disabled for DreamStation models. When the therapy device cable

is connected to your DreamStation device, a message will appear on the device display

indicating that humidiﬁcation is not supported.

Disconnecting the Battery Pack

1. Disconnect the white therapy device cable from the battery pack.

2. Disconnect the power supply from the battery pack.

3. The battery pack may be stored in the carry case for use or storage.

Note: To maximize shelf life, charge the battery pack to 100% before storing it and ensure

that all cables are disconnected.

7 Cleaning and Maintenance

Cleaning Instructions

Every two weeks of use, inspect your battery pack to see if it needs to be cleaned. You can

use any of the following cleaning agents to clean your battery pack.

• Mild detergent

• Water

• 70% Isopropyl Alcohol (Rubbing Alcohol)

• DisCide Ultra Towelettes

• 10% household bleach solution (10% household bleach, 90% water)

1. To avoid electrical shock, ensure that the battery pack is disconnected from all outlets

and power sources. Remove any cables attached to the battery pack.

2. Using one of the approved cleaning products from the list above, dampen a clean, soft

cloth and gently wipe the outside casing of the battery pack.

3. Allow the battery pack to dry completely before reconnecting it to a power source,

device, or cable.

Note: After cleaning, inspect the enclosure carefully for damage such as cracks or broken

pieces.

Table of contents

Other Philips Camera Accessories manuals

Philips

Philips MultiLife 9VB1A17 User manual

Philips

Philips SJB4162 User manual

Philips

Philips PowerLite LR6PS48C User manual

Philips

Philips LR20PS12A User manual

Philips

Philips PowerLife LR6PS12C User manual

Philips

Philips SJB5192 User manual

Philips

Philips LR03PS12C/10 User manual

Philips

Philips LR03EB8A User manual

Philips

Philips NiMH SJB2142 User manual

Philips

Philips R20-P2 User manual

Philips

Philips LR14PB2C/10 User manual

Philips

Philips Power Life LR20PB4C User manual

Philips

Philips Multilife 9VB1A17 User manual

Philips

Philips Power Life 9VPB1C User manual

Philips

Philips PowerLife 6LR61-P8 User manual

Philips

Philips LongLife 3R12LS1A User manual

Philips

Philips 6F22 User manual

Philips

Philips LR14PB4C User manual

Philips

Philips SJB2191/37 User manual

Philips

Philips 2CR5 User manual

Philips

Philips LTC 9405 Series User manual

Philips

Philips ExtremeLife LR03EP2A User manual

Philips

Philips SJB2142 User manual

Philips

Philips CR2032 User manual

Popular Camera Accessories manuals by other brands

Viltrox

Viltrox EF-NEX Mount instructions

Calumet

Calumet 7100 Series CK7114 operating instructions

Ropox

Ropox 4Single Series User manual and installation instructions

Cambo

Cambo Wide DS Digital Series Main operating instructions

Samsung

Samsung SHG-120 Specification sheet

Ryobi

Ryobi BPL-1820 Owner's operating manual

Aegis

Aegis ABL-36020P user manual

Pentax

Pentax Data Back Fc operating manual

Fantasea

Fantasea EyeGrabber F Series instruction manual

Honeywell

Honeywell HDZ20HD user manual

EGO

EGO BA1400T Operator's manual

Sima

Sima SRW-62 user guide

Shape

Shape A7SSMKIT Assembly manual

Slide Kamera

Slide Kamera HST-2 user manual

Power works

Power works 2902613 Original instructions

SES

SES SE-2047-2 user manual

Olympus

Olympus PT-EP05L instruction manual

Starlite

Starlite OctoDome nxt instructions