Philco PTL7100PEX User manual

PTL7100PEX

User Manual

Washing

Machine

CONTENTS

Safety information 2

Safety instructions 3

Product description 5

Control panel 5

Programme Chart 6

Consumption values 8

Options 9

Settings 10

Before first use 10

Daily use 10

Hints and tips 13

Care and cleaning 14

Troubleshooting 16

Technical Data 18

Installation 19

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the result of

incorrect installation or usage. Always keep the instructions

in a safe and accessible location for future reference.

Children and vulnerable people safety

•This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved.

•Do not let children play with the appliance.

•Children aged 3 years and under must be kept away from

this appliance when it is in operation at all times.

•Keep all packaging away from children and dispose of it

appropriately.

•Keep detergents away from children.

•Keep children and pets away from the appliance when the

door is open.

•Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

General Safety

•Do not change the specification of this appliance.

•Do not exceed the maximum load of 7 kg (refer to the

"Programme chart" chapter).

•The operating water pressure at the water entry point from

the outlet connection must be between 0.5 bar (0.05 MPa)

and 8 bar (0.8 MPa).

•The ventilation opening in the base (if applicable) must not

be covered by a carpet, mat, or any floor covering.

•The appliance must be connected to the water mains using

the new supplied hose sets, or other new hose sets

supplied by the Authorised Service Centre.

•Old hose sets must not be reused.

•If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service

Centre or similarly qualified persons to avoid an electrical

hazard.

•Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the socket.

•Do not use high pressure water sprays and/or steam to

clean the appliance.

•Clean the appliance with a moist cloth. Use only neutral

detergents. Do not use abrasive products, abrasive

cleaning pads, solvents or metal objects.

SAFETY INSTRUCTIONS

Installation

• Remove all the packaging and the

transit bolts.

• Keep the transit bolts in a safe place. If

the appliance is to be moved in future

they must be reattached to lock the

drum to prevent internal damage.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Do not install or use the appliance

where the temperature can be less

than 0°C or where it is exposed to the

weather.

• The floor area where the appliance is to

be installed must be flat, stable, heat

resistant and clean.

• Make sure that there is air circulation

between the appliance and the floor.

• Adjust the feet to have the necessary

space between the appliance and the

flooring.

• Do not install the appliance where the

appliance lid cannot be fully opened.

• Do not put a container to collect

possible water leakage under the

appliance. Contact the Authorised

Service Centre to ensure which

accessories can be used.

Electrical connection

• The appliance must be earthed.

• Always use a correctly installed

shockproof socket.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the mains cable need to be

replaced, this must be carried out by

our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not touch the mains cable or the

mains plug with wet hands.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the E.E.C.

Directives.

Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes, pipes

not used for a long time, where repair

work has been carried out or new

devices fitted (water meters, etc.), let

the water flow until it is clean and clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

Use

WARNING! Risk of injury,

electrical shock, fire, burns or

damage to the appliance.

• This appliance is for household use

only.

• Follow the safety instructions on the

detergent packaging.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

• Make sure that all metal objects are

removed from the laundry.

• Do not wash fabrics which are heavily

soiled with oil, grease or other greasy

substances. It can damage rubber

parts of the washing machine. Prewash

such fabrics by hand before loading

them into the washing machine.

Service

• To repair the appliance contact an

Authorised Service Centre.

• Use original spare parts only.

Disposal

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the

mains electrical and water supplies.

• Cut off the mains electrical cable close

to the appliance and dispose of it.

• Remove the door catch to prevent

children or pets from becoming trapped

in the drum.

• Dispose of the appliance in accordance

with local requirements for the disposal

of Waste Electrical and Electronic

Equipment (WEEE).

PRODUCT DESCRIPTION

Appliance overview

1Control panel

2Lid

3Lid handle

4Feet for levelling the appliance

5Rating plate

CONTROL PANEL

Control panel description

1000

900

700

90°

60°

40°

30°

OFF

RINSE

DRAIN

EASY IRON

JEANS

REFRESH

20 MIN

MINI 30

SPIN

COTTON

+PREWASH

SYNTHETICS

DELICATE

WOOL

MIX 20°

COTTON ECO

EXTRA RINSERINSE HOLD QUICK START / PAUSETEMP. SPIN

TIME DELAY START

DOOR LOCK

10 9 8 7 6 5

2 43

1Programme knob

2Display

3DELAY START button

4DOOR LOCK lid indicator

5START/PAUSE button

6EXTRA RINSE button

7QUICK button

8RINSE HOLD button

9SPIN reduction button 10 TEMPERATURE button

Display

A B

•A

The delay start .

When you press the delay start button,

the display shows the delay start time.

•B

This area shows:

- Programme duration

• - Programme is completed

• - Delay start hours

• - Alarm codes (refer to the

chapter 'Troubleshooting')

• - Message of error. Incorrect

option selection: the display shows this

message for some seconds if:

– You set a option that is not suitable

for the programme.

– You change the programme while it

operates.

PROGRAMME CHART

Programme

Temperature range

Maxi‐

mum

load

Maxi‐

mum

spin

speed

Programme description

(Type of load and soil level)

COTTON

90°C - Cold

7 kg

1000 rpm

White cotton and coloured cotton. Normal soil

and light soil.

COTTON+ PREWASH

90°C - Cold

7 kg

1000 rpm

White cotton and coloured cotton. Heavy soil

and normal soil.

COTTON ECO

60°C - 40°C

7 kg

1000 rpm

White cotton and fast-coloured cotton. Normal

soil. The energy consumption decreases and the

time of the washing programme is extended.

SYNTHETICS

60°C - Cold

3 kg

1000 rpm

Synthetic items or mixed fabric items. Normal

soil.

DELICATE

40°C - Cold

2,5 kg

700 rpm

Delicate fabrics such as acrylics, viscose, poly‐

ester items. Normal soil.

WOOL

40°C - Cold

1,5 kg

1000 rpm

Machine washable wool, hand washable wool

and delicate fabrics with «hand washing» care

symbol.

Programme

Temperature range

Maxi‐

mum

load

Maxi‐

mum

spin

speed

Programme description

(Type of load and soil level)

MIX 20°

20°C

2,5 kg

1000 rpm

Special programme for cotton, synthetic and mixed

fabrics lightly soiled. Select this programme to re‐

duce the energy consumption. Make sure that the

detergent is suitable for low temperatures in order

to have good washing results

RINSE 2,5 kg

1000

rpm

To rinse and spin the laundry. All fabrics, except

woollens and very delicate fabrics. Reduce the

spin speed accordingly to the type of laundry.

DRAIN 7 kg To drain the water in the drum. All fabrics.

SPIN 7 kg

1000 rpm

To spin the laundry and to drain the water in the

drum. All fabrics, except woollens and delicate

fabrics.

EASY IRON

60°C - Cold

1 kg

900 rpm

Synthetic items requiring a gentle wash. Normal

and light soil.

REFRESH 20 MIN

30°C

1 kg

900 rpm

Synthetic and delicate items. Light soil items or

items to refresh.

JEANS

60°C - Cold

3 kg

1000 rpm

Items in denim and jersey. Also for dark coloured

items.

MINI 30

30°C

1 kg

700 rpm

A short cycle for synthetic and delicate items

with light soil level or for items to freshen up.

1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010,

these programmes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton pro‐

gramme». They are the most efficient programmes in terms of combined energy and water consumption for

washing normally soiled cotton laundry.

The water temperature of the washing phase may differ from the temperature declared for the se‐

lected programme.

2) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't rotate or

doesn't rotate properly, but this is normal for this programme.

3) The appliance performs the short heating phase if the water temperature is below 20°C. The appliance can

show the temperature setting as “cold”.

4) The default spin speed is 700 rpm.

5) To reduce creasing, this cycle regulates the water temperature and performs a soft wash and spin phase. The

appliance adds some rinses.

Programme options compatibility

Programme

SPIN

RINSE HOLD

QUICK

EXTRA RINSE

DELAY START

COTTON ■ ■ ■ ■ ■

COTTON+ PREWASH ■ ■ ■ ■ ■

COTTON ECO ■ ■ ■ ■

SYNTHETICS ■ ■ ■ ■ ■

DELICATE ■ ■ ■ ■

WOOL ■ ■ ■

MIX 20° ■ ■ ■ ■

RINSE ■ ■ ■ ■

DRAIN ■

SPIN ■ ■

EASY IRON ■ ■ ■ ■

REFRESH 20 MIN ■ ■

JEANS ■ ■ ■

MINI 30 ■

1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep

the full load but the washing results can be unsatisfactory. Recommended load: cotton: 3,5 kg, synthetics and

delicates: 1,5 kg.

CONSUMPTION VALUES

Stated values are obtained in laboratory conditions with relevant stand‐

ards. Different causes can change the data: the quantity and type of laun‐

dry and ambient temperature. Water pressure, the supply voltage and the

temperature of inlet water may also affect the washing programme dura‐

tion.

Technical specifications may be changed without prior notice to improve

the quality of product.

Programmes Load

(kg)

Energy

consump‐

tion (kWh)

Water

consump‐

tion (litre)

Approxi‐

mate pro‐

gramme

duration

(minutes)

Remain‐

ing mois‐

ture (%)

COTTON

60°C 7 1,16 58 197 60

COTTON

40°C 7 0,61 56 192 60

SYNTHETICS

40°C 3 0,45 46 105 37

DELICATE

40°C 2,5 0,55 46 90 37

WOOL

30°C 1,5 0,35 50 65 32

Standard cotton programmes

Standard 60°C cot‐

ton 7 0,95 47 255 60

Standard 60°C cot‐

ton 3,5 0,65 39 188 60

Standard 40°C cot‐

ton 3,5 0,59 39 187 60

1) At the end of spin phase.

2) Not available for some models.

Off Mode (W) Left On Mode (W)

0.48 0.48

The information given in the chart above is compliant with the EU Commission regulation

1015/2010 implementing directive 2009/125/EC

OPTIONS

TEMPERATURE

With this option you can change the

default temperature.

Indicator = cold water

The indicator of the set temperature

comes on.

SPIN

With this option you can set the spin

speed. For the maximum spin speeds see

"Programmes".

The indicator of the set speed comes on.

To drain the water refer to ‘At

the end of the programme’.

RINSE HOLD

Select this option to reduce creasing:

• The washing programme ends with

water in the drum. The drum turns

regularly to reduce creasing.

• The door stays locked. You must drain

the water to unlock the door.

To drain the water refer to

"Draining water out after the

end of the cycle".

QUICK

With this option you can decrease the

programme duration.

Use this option for items with light soil or

items to refresh.

The related indicator comes on.

EXTRA RINSE

With this option you can add some rinses

to a washing programme.

Use this option for persons allergic to

detergents and in areas where the water

is soft.

The related indicator comes on.

DELAY START

With this option you can delay the start of

a programme from 30 minutes to 20

hours.

The related indicator comes on and the

display shows the delay time.

SETTINGS

Acoustic signals

The acoustic signals operate when:

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic

signals, touch the buttons

RINSE HOLD and QUICK at the same

time for 4 seconds.

If you deactivate the acoustic

signals, they continue operate

when the appliance has a

malfunction.

BEFORE FIRST USE

1. Put a small quantity of detergent in the

compartment for washing phase.

2. Set and start a programme for cotton

at the highest temperature without

laundry.

This removes all possible dirt from the

drum and the tub.

DAILY USE

WARNING! Refer to Safety

chapters.

Loading the laundry

1. Open the appliance lid.

Table of contents

Other Philco Washer manuals

Philco

Philco PLDI 147 B King User manual

Philco

Philco PLD 127 D QTL User manual

Philco

Philco PLCB05GFFWTG User manual

Philco

Philco PLDA 1273 Chiva User manual

Philco

Philco PLDI 148 AJW steam User manual

Philco

Philco PTL6105 Manual

Philco

Philco PTL7145D Manual

Philco

Philco PWM 858 User manual

Philco

Philco PWS71400V User manual

Philco

Philco PLD 106 E User manual

Philco

Philco PTL7100P User manual

Philco

Philco PLD 14840 User manual

Philco

Philco PLDI 148 A steam User manual

Philco

Philco PL 1062 CHIVA User manual

Philco

Philco PFL510CLFW3CF User manual

Philco

Philco PTL7120PEX User manual

Philco

Philco PLF 1061 User manual

Philco

Philco PLS 1061 User manual

Philco

Philco PLD 1272 User manual

Philco

Philco PLDSI 148 A KING User manual

Philco

Philco PLD 1473 User manual

Philco

Philco PLD 1473 F User manual

Philco

Philco PW7508DX User manual

Philco

Philco PLDS 1261 F User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide