Pfaff 1183-712/02 User manual
This instruction manual applies to machines from the
following serial numbers onwards:
# 6001000
Instruction Manual
296-12-18 610/002
Betriebsanleitung engl. 09.04
1183-712/02
The reprinting, copying or translation of PFAFF Instruction Manuals, whether in whole or in
part, is only permitted with our previous authorization and with written reference to the
source.
PFAFF Industrie Maschinen AG
Postfach 3020
D-67653 Kaiserslautern
Königstr. 154
D-67655 Kaiserslautern
This Instruction Manual is valid for all models and subclasses listed in the
chapter " Specifications ".
The adjustment manual for the machines can be downloaded free of charge
from the internet address
www.pfaff-industrial.com/de/service/download/index.php3.
As an alternative to the internet download the adjustment manual can also be
ordered in book form under part no. 296-12-18 611/002.
Index
Contents ................................................................................. Chapter - Page
1Safety ........................................................................................................................... 1 - 1
1.01 Directives...................................................................................................................... 1 - 1
1.02 General notes on safety ................................................................................................ 1 - 1
1.03 Safety symbols ............................................................................................................. 1 -2
1.04 Important points for the user ........................................................................................ 1 - 2
1.05 Operating and specialist personnel ............................................................................... 1 - 3
1.05.01 Operating personnel...................................................................................................... 1- 3
1.05.02 Specialist personnel ......................................................................................................1- 3
1.06 Danger .......................................................................................................................... 1 - 4
2Proper use.................................................................................................................... 2 -1
3Specifications .............................................................................................................. 3 - 1
3.01 PFAFF1183-712/02....................................................................................................... 3 - 1
3.02 Models and subclasses................................................................................................. 3 - 1
4Disposal of machine ................................................................................................... 4 - 1
5Transport, packaging and storage ............................................................................. 5 - 1
5.01 Transportation to customer's premises ........................................................................ 5 - 1
5.02 Transport within the customer’s premises ................................................................... 5 - 1
5.03 Disposal of the packaging ............................................................................................. 5 - 1
5.04 Storage ......................................................................................................................... 5 - 1
6Explanation of the symbols........................................................................................ 6 - 1
7Controls ....................................................................................................................... 7- 1
7.01 On/off switch ................................................................................................................7- 1
7.02 Pedal ............................................................................................................................. 7 - 1
7.03 Control panel................................................................................................................. 7 - 2
7.03.01 Screen displays ............................................................................................................. 7 - 2
7.03.02 Function keys................................................................................................................ 7 - 2
8Mounting and commissioning the machine ............................................................. 8 - 1
8.01 Mounting....................................................................................................................... 8 - 1
8.01.01 Adjusting the table-top height ....................................................................................... 8 - 1
8.01.02 Garnrollenständer montieren......................................................................................... 8 - 2
8.02 Connecting the plug-in connections and earth cables ................................................... 8 - 3
8.03 Start inhibitor................................................................................................................. 8 - 4
8.03.01 Mounting the start inhibitor........................................................................................... 8 - 4
8.03.02 Checking the start inhibitor function ............................................................................. 8 - 4
8.04 Basic setting of the machine drive unit ......................................................................... 8 - 5
8.05 Commissioning ............................................................................................................. 8 - 7
8.06 Switching the machine on/off ....................................................................................... 8 - 7
8.07 Table top cutout ............................................................................................................ 8- 8
8.08 Mounting the table top.................................................................................................. 8 - 9
Index
Contents ................................................................................. Chapter - Page
9Preparation .................................................................................................................. 9 - 1
9.01 Inserting the needle ...................................................................................................... 9 - 1
9.02 Winding the bobbin thread, adjusting the thread tension .............................................. 9 - 2
9.03 Removing/Inserting the bobbin case ............................................................................. 9 - 3
9.04 Inserting the bobbin case / Adjusting the bobbin thread tension................................... 9 - 3
9.05 Threading the needle thread / Adjusting the needle thread tension .............................. 9 - 4
10 Care and maintenance .............................................................................................. 10 - 1
10.01 Cleaning the machine.................................................................................................. 10 - 1
10.02 Topping up the oil tank ................................................................................................ 10 - 2
11 Wearing parts ............................................................................................................ 11 - 1
Safety
1 - 1
1 Safety
1.01 Directives
This machine is constructed in accordance with the European regulations contained in the
conformity and manufacturer’s declarations.
In addition to this Instruction Manual, also observe all generally accepted, statutory and other
regulations and legal requirements and all valid environmental protection regulations!
The regionally valid regulations of the social insurance society for occupational accidents or
other supervisory organizations are to be strictly adhered to!
1.02 General notes on safety
●This machine may only be operated by adequately trained operators and only after having
completely read and understood the Instruction Manual!
●All Notes on Safety and Instruction Manuals of the motor manufacturer are to be read
before operating the machine!
●The danger and safety instructions on the machine itself are to be followed!
●This machine may only be used for the purpose for which it is intended and may not be
operated without its safety devices. All safety regulations relevant to its operation are to
be adhered to.
●When exchanging sewing tools (e.g. needle, roller presser, needle plate and bobbin),
when threading the machine, when leaving the machine unattended and during
maintenance work, the machine is to be separated from the power supply by switching
off the On/Off switch or by removing the plug from the mains!
●Everyday maintenance work is only to be carried out by appropriately trained personnel!
●Repairs and special maintenance work may only be carried out by qualified service staff
or appropriately trained personnel!
●Work on electrical equipment may only be carried out by appropriately trained personnel!
●Work is not permitted on parts and equipment which are connected to the power supply!
The only exceptions to this rule are found in the regulations EN 50110.
●Modifications and alterations to the machine may only be carried out under observance of
all the relevant safety regulations!
●Only spare parts which have been approved by us are to be used for repairs! We
expressly point out that any replacement parts or accessories which are not supplied by
us have not been tested and approved by us. The installation and/or use of any such
products can lead to negative changes in the structural characteristics of the machine.
We are not liable for any damage which may be caused by non-original parts.
Safety
1 - 2
1.03 Safety symbols
Danger!
Points to be observed.
Danger of injury for operating and specialist personnel!
Caution
Do not operate without finger guard and safety devices.
Before threading, changing bobbin and needle, cleaning
etc. switch off main switch.
I
1.04 Important points for the user
●This Instruction Manual is an integral part of the machine and must be available to the
operating personnel at all times.
●The Instruction Manual must be read before operating the machine for the first time.
●The operating and specialist personnel is to be instructed as to the safety equipment of
the machine and regarding safe work methods.
●It is the duty of the user to only operate the machine in perfect running order.
●It is the obligation of the user to ensure that none of the safety mechanisms are removed
or deactivated.
●It is the obligation of the user to ensure that only authorized persons operate and work on
the machine.
Further information can be obtained from your PFAFF agent.
Safety
1 - 3
1.05 Operating and specialist personnel
1.05.01 Operating personnel
Operating personnel are persons responsible for the equipping, operating and cleaning of the
machine as well as for taking care of problems arising in the sewing area.
The operating personnel is required to observe the following points and must:
●always observe the Notes on Safety in the Instruction Manual!
●never use any working methods which could adversely affect the safety of the machine!
●not wear loose-fitting clothing or jewelery such as chains or rings!
●also ensure that only authorized persons have access to the potentially dangerous area
around the machine!
●always immediately report to the person responsible any changes in the machine which
may limit its safety!
1.05.02 Specialist personnel
Specialist personnel are persons with a specialist education in the fields of electrics,
electronics and mechanics. They are responsible for the lubrication, maintenance, repair and
adjustment of the machine.
The specialist personnel is obliged to observe the following points and must:
●always observe the Notes on Safety in the Instruction Manual!
●switch off the On/Off switch before carrying out adjustments or repairs, and ensure that
it cannot be switched on again unintentionally!
●wait until the luminous diode on the control box is no longer blinking or on before
beginning adjustment or repair work.
●never work on parts which are still connected to the power supply! Exceptions are
explained in the regulations EN 50110.
●replace the protective coverings and close the electrical control box afer all repairs or
maintenance work!
Safety
1 - 4
96
-
001
Do not operate the machine without its take-up lever guard 1!
Danger of injury due to the motion of the take-up lever!
Do not operate the machine without the finger guard 2!
Danger of injury by the needle!
Do not operate the machine without machine cover 3!
Danger of injury from the drive belts!
1.06 Danger
A working area of 1 meter is to be kept free both in front of and behind the
machine while it is in operation so that it is always easily accessible.
Never reach into the sewing area while sewing! Danger of injury by the needle!
Never leave objects on the table while adjusting the machine settings! Objects
can become trapped or be slung away! Danger of injury!
Fig. 1 - 01
3
1
93-002
2
Proper use
2 - 1
2 Proper use
The PFAFF 1183-712/02 is a single-needle, lockstitch, flatbed sewing machine for industrial
tacking and basting work.
Any and all uses of this machine which have not been approved of by the
manufacturer are considered to be inappropriate! The manufacturer cannot be
held liable for any damage caused by the inappropriate use of the machine! The
appropriate use of the machine includes the observance of all operational,
adjustment, maintenance and repair measures required by the manufacturer!
Specifications
3 - 1
3 Specifications
3.01 PFAFF 1183-712/02▲
Stitch type:.................................................................................................. 301 (lockstitch)
Needle system:.......................................................................................................134 - 35
Needle size in 1/100 mm:........................................................................................80 - 100
Presser foot clearance: ............................................................................................ 16 mm
Clearance width: .................................................................................................... 260 mm
Clearance height: ................................................................................................... 125 mm
Bedplate dimensions:................................................................................... 476 x 177 mm
Sewing head dimensions:
Length:..............................................................................................................ca. 550 mm
Width: ...............................................................................................................ca. 180 mm
Height (above table): .........................................................................................ca. 300 mm
Max. speed: ...................................................................................................... 1200 spm ◆
Needle bar stroke:.................................................................................................... 36 mm
Connection data:
Operating voltage:..........................................................................230 V ± 10 %, 50/60 Hz
Max. power consumption: ....................................................................................... 400 VA
Fuse protection: ............................................................................................ 1 x 16 A, inert
Noise data:
Noise emission level at workplace with a sewing speed of 1000 spm: ...LpA ≤68,5 dB(A) ■
(Noise measurement in accordance with DIN 45 635-48-A-1, ISO 11204, ISO 3744, ISO
4871)
Net weight of sewing head: .................................................................................. ca. 30 kg
Gross weight of sewing head: .............................................................................. ca. 38 kg
■ KpA = 2,5 dB
▲ Subject to alterations
◆Depending on the material and sewing operation
3.02 Models and subclasses
Additional equipment:
Subclass -900/24 ............................................................................ Thread trimming device
Other manuals for 1183-712/02
1
Table of contents
Other Pfaff Sewing Machine manuals
Pfaff
Pfaff 5483 Series Guide
Pfaff
Pfaff Creative Vision User manual
Pfaff
Pfaff creative 1469 User manual
Pfaff
Pfaff CREATIVE 2170 PREPARATIONS User manual
Pfaff
Pfaff 8362-004 User manual
Pfaff
Pfaff 3519-5/01 User manual
Pfaff
Pfaff 467 User manual
Pfaff
Pfaff 3371-1 series Guide
Pfaff
Pfaff 2081 User manual
Pfaff
Pfaff creative sensation pro II User manual
Pfaff
Pfaff 1295 Guide
Pfaff
Pfaff select 1520 User manual
Pfaff
Pfaff CREATIVE 4.0 - User manual
Pfaff
Pfaff 441-O User manual
Pfaff
Pfaff 1295 User manual
Pfaff
Pfaff 3117 User manual
Pfaff
Pfaff 2481-3/01-980/30 User manual
Pfaff
Pfaff 3834-3/11 User manual
Pfaff
Pfaff dorina 72 User manual
Pfaff
Pfaff Expression 3.0 User manual
