PETDIARY F810 Plus User manual
F810 Plus
Outdoor GPS Wireless Electric Dog Fence
Please read this manual carefully before use
Contents
2
3
4
5
5
8
8
9
15
15
16
16
17
18
28
29
30
What You Get
Description of Buttons
1.At a glance
2.Charging
3.Installation
4.Function introduction
1.Wearing methods
2.Wearing precautions
Wearing Methods and Precautions
Frequently Asked Questions
About After-Sales
Compliance
FCC Warning
Safety Instructions
..............................................................
........................................................
........................................................................
.......................................................
..............................................................................
................................................................................
.............................................................................
............................................................
...................................................................
............................................................
3.How to Assemble the Collar Belt
..........................................
Reference sizes of different dogs
.................................
.........................................
..............................................................
...........................................................................
........................................................................
................................
Product Introduction
2
Safety Instructions
This product cannot be tested directly on
humans, otherwise it will violate local
laws.
4
This product is suitable for large and
medium dogs.
1
Do not use the product indoors or in
places with interference (Such as under
trees, indoors, or under eaves where
there is no GPS signal or weak signal.)
3
Product signals cannot locate the center
point in bars 2 and below. It also doesn't
trigger any penalties. Even if the dog is
outside the perimeter of the fence.
2
5
6
7
8
Turn off or remove the product before
playing with the dog.
Please do not wear the product on your
dog for a long time.
Do not place the product near a stove or
at high temperatures.
Do not open the shell of the product
which will cause the lithium battery to
disconnect or start a fire.
3
Product Introduction
1.The center point and the safe radius distance are set through
GPS satellite positioning, your pet can move freely within the
set safe range.
2.The product is designed to activate a warning tone, vibration,
and static stimulation when your pet goes beyond the set
distance range. Once your pet returns to the safe distance
range, the product will stop any warning signals.
3.Basically, you need to train your pet on how to stop the
warning triggered by the product.
GPS
Out of the radius range In the radius range
Positioning center point
4
What You Get
COMPONENTS
1
10
1
1
2 pairs
1
Boundary flag
F810 Plus outdoor GPS
wireless electric dog fence
Static stimulation test light
Magnetic charging cable
User manual
Contact points
F810 Plus
Outdoor GPS Wireless Electric Dog Fence
Please read this manual carefully before use
Collar strap
③ Safety radius distance adjustment button
① Multi- function button
Magnetic charging port
Contact points
② Center point setting button
5
Description of Buttons
1.At a glance
6
Multi- function
button
Used to turn on/off and mode
adjustment.
Center point
setting button
Used to set the center point and adjust
the safe radius distance
Up/down
button
Used to adjust the distance of safe
radius
①
②
③
GPS signal icon GPS signal strength
Positioning icon
Battery power
icon
Vibration mode
This icon is displayed when the
center point is successfully
positioned. If the positioning fails,
the icon will blink, and the product
will beep for 5 seconds.
Used to display the battery
power status.
If this icon is on, it indicates
that the product is currently in
vibration mode setting.
A successful location is indicated
by the displaying of the location
icon and "000".
①
②
③
④
⑤
7
Static stimulation
mode
If this icon is on, it indicates that the
product is currently in static
stimulation mode setting.
L level strength
icon
Current distance
from the center
point
Device status
description
Low signal
strength
No signal
It is the level icon displayed during
operation.
When the distance icon is displayed,
the number represents the currently
set safe distance radius, which is
not displayed when it is not set.
It indicates that the GPS searching
is in progress when the icon is
flashing. It indicates an
undetermined center point or a
sleep state when the icon does not
flash.
When the product shows a GPS
signal strength of 2 bars or lower.
If the product still does not find the
GPS signal within 6 minutes, it goes
into the deep sleep state, and the
GPS will be suspended to reduce
the power consumption.
⑥
⑦
⑧
⑨
⑩
⑪
8
❶ Install the
contact points
❸Tighten the static
stimulation column
with the test light
❷ As wrench
Tips: Please fully charge the product before use
Contact the magnetic charging cable port with the charging port,
and the product can be charged once they are adsorbed to each
other.
Red light means on charging Green Light means product
fully charged
Protection mode
The product enters the 1min
protection mode after every 6 times
of correction, the screen displays
P and beeps, and this mode lasts
for one minute to enter the next
cycle
⑫
2.Charging
3.Installation
9
❸ Center point positioning
❶ Turn on/off
❷ GPS signal searching
Press and hold the M button about 3s to
turn on/off the product.
The product takes 3-5 minutes to search
for GPS signals after the product is turned
on. The GPS icon and == icon are flashing
is an indication that the signal is being
searched. When the signal is found, and it
is 3 bars or higher, you can move to the next
step. Recommended best use with 5 bars
GPS signal.
It is necessary to set the center point
before using the device for the first time.
To do this, when the screen is lit up (orange
background), press and hold the positioning
button until the screen displays the
positioning icon and '000', which is an
indication of a successful positioning of the
center point.
(The center point can only be positioned
when the signal strength ≥ 3 bars. If there is
no positioning symbol “ ’’ and “000”, it
means that the center point positioning is
failed）
4.Function introduction
Table of contents
Other PETDIARY Pet Care Product manuals
