Pentair Keystone Figure 952 NPS 2 Installation instructions

KEYSTONE FIGURE 952 KNIFE GATE VALVES

NPS 2 - 24 DiSaSSembly iNStructioNS

Removal, disassembly and inspection instructions.

RISING SPINDLE VALVES

•Ensureallpartsarecleanandfreeofforeign

material, particularly the chest area between

the gland and valve bore.

•Foroptimumleak-freeservice,gatefaces

andedgesmustbesmooth,andfreeof

gallingorburring.Repairorreplaceif

excessively worn or damaged.

•Seatingfacesinvalveboremustbesmooth

andundamagedotherwiseleakageislikely

tooccur.Replaceifnecessary.

•Checkglandsealingfacesontopof

valve body. They should be smooth and

undamaged.Repairifnecessary.

•Checkthreadsonspindlesandbolts-

repair/replaceifnecessary.

•Replacelocknutsifthreadsarestripped

orweakened.Theseareusedasprotection

against vibration.

•Checkandreplacegateguides(13)ifnecessary.

NOTE:

NPS2-8F952valveillustrated

NOTE:

NPS10-24F952valveillustrated

www.pentair.com/valves PPLBE-0004-US 14/07

REMOVAL AND DISASSEMBLY

1. Ensure pipeline is not pressurized and that

any hazardous medium is drained away.

2.Largevalvesneedachainblockorcraneto

assist.Iflarge,heavycylindersarefitted,they

canberemovedfirstiffeltnecessary:

 •Disconnectactuatorairlinesandpower

supplies etc.

 •Supportactuator,disconnectactuatorrod

fromvalvegate,undobridgeboltsorhold

downbolts,removeactuatorfromvalve.

3.Supportvalvebodyandremoveallflange

bolts.

4.Removevalveandgasketsfromthepipeline.

For NPS 2-8 valves

 •Loosenglandboxnuts(10)toendofpillar

(9)threads.Removeclevisfastener(15).

Removebothbridgenuts(13).

 •Removehandwheel(oractuatorassembly.

Unscrewbothpillars(9)andremove.

For NPS 10-24 valves

 •Removeglandboxnuts(10)andwashers

(11,12).Removeclevisfasteners(19,20).

 •Removeuprightbolts(14)andwashers(15)

atvalvebody(1).Removepillarnut(23)and

washer(22).

5.Withdrawglandbox(3)andgate(2)assembly.

6.Removegateguides(13)fromvalvebody(1).

KEYSTONE FIGURE 952 KNIFE GATE VALVES

NPS 2 - 24 DiSaSSembly iNStructioNS

NON - RISING SPINDLE VALVES

•Ensureallpartsarecleanandfreeofforeignmaterial,particularlythechestareabetweenthe

gland and valve bore.

•Foroptimumleak-freeservice,gatefacesandedgesmustbesmooth,andfreeofgallingor

burring.Repairorreplaceifexcessivelywornordamaged.

•Seatingfacesinvalveboremustbesmoothandundamagedotherwiseleakageislikelytooccur.

Replaceifnecessary.

•Checkglandsealingfacesontopofvalvebody.Theyshouldbesmoothandundamaged.Repair

ifnecessary.

•Checkthreadsonspindlesandbolts-repair/replaceifnecessary.

•ReplaceNylocnutsifthreadsarestrippedorweakened.Theseareusedasprotectionagainst

vibration.

•Checkandreplacegateguides(11)ifnecessary.

REMOVAL AND DISASSEMBLY

1. Ensure pipeline is not pressurized and that any hazardous medium is drained away.

2. Largevalvesneedachainblockorcranetoassist.Iflarge,heavycylindersarefitted,theycan

beremovedfirstiffeltnecessary:

•Disconnectactuatorairlinesandpowersuppliesetc.

 •Supportactuator,disconnectrodfromvalvegate,undobridgeboltsorholddownbolts,

removeactuatorfromvalve.

3. Supportvalvebodyandremoveallflangebolts.

4. Removevalveandgasketsfromthepipeline.

 •Removeglandboxnuts(8)andwashers(21,10).Removeclevisfasteners(13)andwashers

(22).

 •Removeuprightmountingbolts(12)andwashers(14)atvalvebody(1).Removepillarnut(19)

andwasher(9).

5. Withdrawglandbox(3)andgate(2)assembly.

6. Removegateguides(11)fromvalvebody(1).

NOTE:

NPS10-24F952non-risingspindlevalveillustrated.

PENTAIR VALVES & CONTROLS

www.pentair.com/valves

AllPentairtrademarksandlogosareownedbyPentairLtd.Allotherbrandorproductnamesaretrademarksorregisteredmarksoftheirrespectiveowners.

Becausewearecontinuouslyimprovingourproductsandservices,Pentairreservestherighttochangeproductdesignsandspecificationswithoutnotice.

This manual suits for next models

Table of contents

Other Pentair Control Unit manuals

Pentair

Pentair HYPRO PROSTOP-E User manual

Pentair

Pentair Hydromatic Novus 4000 Manual

Pentair

Pentair FLECK 2750 Downflow User manual

Pentair

Pentair BAA A390-D.03 Select User manual

Pentair

Pentair Fleck 4600 MECH User manual

Pentair

Pentair PENTEK INTELLIDRIVE PID2000-1123 User manual

Pentair

Pentair FLECK 5800 User manual

Pentair

Pentair F251 Installation and operating instructions

Pentair

Pentair FLECK 2850 SXT User guide

Pentair

Pentair JUNG PUMPEN BASICLOGO AD 00 E User manual

Pentair

Pentair FLECK 4600-SXT User guide

Pentair

Pentair AUTOTROL368 User guide

Pentair

Pentair HI-FLOW 261049 User manual

Pentair

Pentair E-Box SOLEO Connect Operating instructions

Pentair

Pentair FLECK PROFLOSXT DOWNFLOW User manual

Pentair

Pentair AUTOTROL 368 User manual

Pentair

Pentair DSD50 Series User manual

Pentair

Pentair FLECK3150 DOWNFLOW User manual

Pentair

Pentair HI FLOW SIX-WAY 1-1/2 INCH TOP MOUNT VALVE User manual

Pentair

Pentair FLECK 7000XTR User manual

Pentair

Pentair JUNG PUMPEN BASICLOGO EXM Series User manual

Pentair

Pentair E-Box MAESTRO Lite Operating instructions

Pentair

Pentair FLECK NXT User manual

Pentair

Pentair F783E User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual