Pelonis HF-0063 User manual

OWNER’S MANUAL

Digital Fan Heater

MODEL: HF-0063

ITEM: 1068266

PLEASE READ AND SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be

followed to reduce the risk of fire, electric shock, and injury to persons,

including the following:

1. Read all instructions before using this heater.

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot

surfaces. If provided, use handles when moving this heater. Keep combustible

materials, such as furniture, pillows, bedding, papers, clothes, and curtains at

least 3 feet (0.9m) from the front of the heater and keep them away from the

sides and rear.

3. Extreme caution is necessary when any heater is used by or near children or

invalids and whenever the heater is left operating and unattended.

4. Always unplug heater when not in use.

5. Do not operate any heater with a damaged cord or plug or after the heater

malfunctions, has been dropped or damaged in any manner. Discard heater or

return heater to authorized service facility for examination, electrical or

mechanical adjustment, or repair.

6. Do not use outdoors.

7. This heater is not intended for use in bathrooms, laundry areas and similar

indoor locations. Never locate heater where it may fall into bathtub or other

water container.

8. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or

similar coverings. Do not route cord under furniture or appliances. Arrange cord

away from traffic area and where it will not be tripped over.

9. To disconnect heater, first turn controls to off, then remove plug from outlet.

10.Do not insert or allow foreign objects to enter any ventilation or exhaust

opening as this may cause an electric shock or fire, or damage the heater.

11.To prevent a possible fire, do not block air intakes or exhaust in any manner.

Do not use on soft surfaces, like a bed, where openings may become blocked.

12.A heater has hot and arcing or sparking parts inside. Do not use it in the areas

where gasoline, paint, or flammable liquids are used or stored.

13.Use this heater only as described in this manual. Any other use not

recommended by the manufacturer may cause fire, electric shock, or injury to

persons.

14. Always plug heaters directly into a wall outlet/receptacle. Never use

with an extension cord or relocatable power tap (outlet/power strip).

15.This heater draws 12.5 amps during operation. To prevent overloading a circuit,

do not plug the heater into a circuit that already has other appliances working.

16.It is normal for the plug to feel warm to the touch; however, a loose fit between

the AC outlet (receptacle) and plug may cause overheating and distortion of the

plug. Contact a qualified electrician to replace loose or worn outlet.

17.The output of this heater may vary and its temperature may become intense

enough to burn exposed skin. Use of this heater is not recommended for

persons with reduced sensitivity to heat or an inability to react to avoid burns.

18.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot and

fully inser.

“SAVE THESE INSTRUCTIONS”

ASSEMBLY

This heater is pre-assembled in factory.

ELECTRICAL RATINGS

This product is rated 12.5 amps (1500W) at 120V, 60 Hz.

FEATURES

POWER

Setting Button

TIMER

Setting Button OSCILLATING

Setting Button

OPERATING INSTRUCTIONS

IMPORTANT

Your heater is equipped with a polarized alternating current line plug (a plug having one

blade wider than the other). This plug will fit into the power outlet only one way. This is a

safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.

If the plug should still fail to fit, contact your electrician to replace your outlet. DO NOT

defeat the safety purpose of the polarized plug.

Place the heater on a firm level surface free from obstructions, and at least 3 ft. away from

any wall and any other objects such as furniture, curtains, plants or combustible material.

• Plug the heater into a grounded 120V outlet. The buzzer sounds, after pressing the

power button,the Digital Screen indicates current temperature.

• Press the Power button repeatedly to the desired setting. The cycle is as follows:

• High: Heater operates at a higher wattage, around 1500 Watts.

• Low: Heater operates at a lower wattage, around 900 Watts.

• Fan: The fan circulates room air only. The heating elements are “OFF”

Turning the Unit Off

Press the POWER button to cycle through the functions until none of them are lit (High, Low,

Fan).

After the unit is turned off, the fan will continue to run for 15 seconds to cool down, the

digital screen will display the process from 15 backward to 1. After the display turns off,

unplug the heater from the electrical outlet.

Set the desired temperature

• In order to set the thermostat the unit has to be on High or Low.

• When the unit is on, press the ▲or ▼button, the buzzer sounds and the setting

temperature flash on the digital screen.

• At this time you can press the ▲or ▼key to the temperature desired. (40F-95F).

• Wait for around 5 seconds until the digital screen displays the current temperature

again.

If the current temperature is higher than the set temperature (95F is original set

temperature), the unit will stop heating.

Setting timer

• Press UP or DOWN button repeatedly to set the auto-on time within 12 hours.

Setting the heater to turn off automatically

• In order to set the unit to turn off, the unit must be on (High or Low).

• Press the Timer button, the timer setting pilot will illuminate.

• You can see “0” flashes on the digital screen.

Press UP or DOWN button repeatedly to set the auto-off time within 12 hours.

Setting the heater to turn on automatically

• In order to set the unit to turn on, the unit must be off.

• Press the Timer button, the timer setting pilot will illuminate, and you can see “0”

flashes on the digital screen.

•

The timer indicator will appear on the digital screen after the timer is set. You can check the

remaining time of timer by pressing the TIMER button.

UNPLUG UNIT WAIT COOLING DOWN

CLEANING AND STORAGE

We recommend that the heater be cleaned at least once a month and before off-season

storage.

Turn the heater OFF and unplug it. Allow it to cool.

Use a dry cloth to clean the external surfaces of the heater.

DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.

Clean your heater using the above-mentioned steps, then pack the heater in its original

container and store it in a cool dry place.

This heater does not disassemble.

The motor is factory lubricated for life, and will require no further lubrication.

SPECIFICATIONS

Model NO. HF-0063

Voltage 120V

Frequency 60Hz

Output Power (W) 1500W

Electric Current (A) 12.5A

SERVICE & SUPPORT

DATE OF PURCHASE:

_____________________________________________________________

PLACE OF PURCHASE:

____________________________________________________________

(STAPLE SALES RECEIPT HERE)

NOTE: PROOF OF PURCHASE IS REQUIRED FOR

ALL WARRANTY CLAIMS

In the event of a warranty claim or if service is required for this heater, please contact us at the

following:

Tel: 866 646 4332

Email us at: [email protected]

For questions or comments, please write to:

Midea America Corporation

Customer Care Center

11411 NW 107th Street, Suite 12

Miami, FL 33178

For your records, staple your sales receipt to this manual and record the following:

Digital Fan Heater

MANUAL DEL USUARIO

Calentador De Ventilador Digital

MODELO: HF-0063

ARTÍCULO: 1068266

POR FAVOR LEA Y GUARDE ESTAS INSTRUCCIONES

INSTRUCCIONES IMPORTANTES

POR FAVOR LEA Y GUARDE ESTAS INSTRUCCIONES IMPORTANTES DE

SEGURIDAD

Cuando se utilizan electrodomésticos, se deben seguir siempre ciertas

precauciones básicas para reducir el riesgo de incendio, descarga eléctrica y

lesiones personales, incluyendo las siguientes:

1. Lea todas las instrucciones antes de utilizar este calentador.

2. Este calentador se calienta cuando se utiliza. Para evitar quemaduras, no deje

que la piel entre en contacto con las superficies calientes. Si el calentador tiene

agarraderas, utilice los mismos para moverlo. Mantenga los materiales

combustibles, como muebles, almohadas, ropa de cama, papeles, ropa y cortinas

al menos a 3 pies (0.9 m.) del frente del calentador y manténgalos alejados de los

costados y la parte posterior.

3. Es necesario tener extrema precaución cuando se utilice cualquier calentador

cerca de niños o personas inválidas y siempre que el calentador se deje en

funcionamiento sin supervisión.

4. Desconecta siempre el calefactor cuando no se encuentre en uso.

5. No utilices el calefactor con un cable o enchufe dañado, o después de que el

calefactor falle, o haya sufrido caídas o daños de cualquier tipo. Desecha o

devuelve el calefactor al centro de mantenimiento autorizado para revisarlo, realizar

cualquier ajuste eléctrico o mecánico, o repararlo.

6. No lo utilice en exteriores.

7. Este calentador no fue diseñado para su utilización en baños, áreas de lavado y

lugares similares de interiores. Nunca coloque el calentador en un lugar desde

donde pueda caerse en una bañera u otro recipiente con agua.

8. No pases el cable debajo de alfombras. No cubras el cable con tapetes, alfombras

de pasillo o cubiertas similares. No coloques los cables debajo de muebles o

electrodomésticos. Coloca el cable lejos de las zonas de alto tráfico, donde alguien

pueda enredarse con él y caer.

9. Para desconectar el calentador, primero coloque los controles en la posición de

apagado y luego retire el enchufe del tomacorriente.

10.No inserte o permita que objetos externos entren en ninguna ventilación o salida

de ventilación ya que esto puede causar una descarga eléctrica o incendio, o

daños al calentador.

11.Para prevenir un posible incendio, no bloquee las entradas y salidas de aire de

ninguna manera. No lo utilice en superficies suaves, como una cama, donde las

aperturas se pueden bloquear.

12.Un calentador contiene partes calientes y con chispas o un arco eléctrico. No lo

utilice en áreas donde se usa o se guarda gasolina, pintura o líquidos inflamables.

13.Utilice este calentador sólo de la manera que se describe en este manual.

Cualquier otro uso no recomendado por el fabricante puede causar fuego,

descarga eléctrica o lesiones a personas.

14. Siempre conecta los calefactores directamente a un tomacorriente/receptáculo

de pared. Nunca uses con una extensión eléctrica o tomacorriente móvil

(tomacorriente/contacto múltiple).

15.Este calentador consume 12.5 amperes durante su funcionamiento. Para prevenir

sobrecargar un circuito, no enchufe el calentador en un circuito que ya tenga otros

electrodomésticos en funcionamiento.

16.Es normal que el enchufe esté tibio al tacto; sin embargo, un encaje flojo entre el

tomacorriente AC (receptáculo) y el enchufe pueden causar sobrecalentamiento y

distorsión del enchufe. Póngase en contacto con un electricista calificado para

reemplazar el tomacorriente flojo o gastado.

17.

18.Nota: Para evitar la electrocución, se debe ajustar el tapón de ancho a la ranura y a

todo el interior.

El calor producido por este calentador puede variar y su temperatura se puede

volver lo suficientemente intensa como para quemar la piel expuesta. No se

recomienda la utilización de este calentador a personas con sensibilidad reducida

al calor o con inhabilidad para reaccionar o evitar quemaduras.

“GUARDE ESTAS INSTRUCCIONES”

MONTAJE

Este calentador se ha armado previamente en fabrica.

ÍNDICES ELÉCTRICOS

Este producto funciona bajo de 12.5 amps (1500W) en 120V, 60 Hz.

CARACTERÍSTICAS

ENERGÍA

Botón de Ajuste

TEMPORIZADOR

Botón de Ajuste OSCILATE

Botón de Ajuste

19.

Other manuals for HF-0063

Table of contents

Other Pelonis Heater manuals

Pelonis

Pelonis HC-451 User manual

Pelonis

Pelonis PSH700R User manual

Pelonis

Pelonis NTK15A User manual

Pelonis

Pelonis NY1507-14A User manual

Pelonis

Pelonis NT20-12D User manual

Pelonis

Pelonis HV-1004 User manual

Pelonis

Pelonis PSH08F1ABBC User manual

Pelonis

Pelonis HF-0063 User manual

Pelonis

Pelonis HT-0605 User manual

Pelonis

Pelonis HC-1010 User manual

Pelonis

Pelonis 1500W-II User manual

Pelonis

Pelonis HO-158E User manual

Pelonis

Pelonis NTY15-16LA User manual

Pelonis

Pelonis HB-215T User manual

Pelonis

Pelonis PSH700G User manual

Pelonis

Pelonis HC-0125D User manual

Pelonis

Pelonis NY1506-18SRA User manual

Pelonis

Pelonis PSH700 User manual

Pelonis

Pelonis PHT30D7BBC User manual

Pelonis

Pelonis HO-0203D User manual

Pelonis

Pelonis HC-0155M User manual

Pelonis

Pelonis PSHF2022EOC User manual

Pelonis

Pelonis HO-0280 User manual

Pelonis

Pelonis HC-0119A User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide