Pelonis FW23-8HS User manual

OWNER’S MANUAL

9" WINDOW FAN

MODEL:FW23-8HS

ITEM: 667618

READ AND SAVE THESE INSTRUCTIONS

Read Rules for Safe Operation and Instructions Carefully.

1. To reduce the risk of fire or electric shock, do not use this fan with any solid state

speed control device.

2. This appliance has a polarized plug(one blade is wider than the other). To reduce

the risk of electric shock, this plug is intended to fit fully in the outlet only one way.

If plug does not fit fully in the outlet, reverse plug. If it is still does not fit, contact a

qualified electrician. Do not attempt to defect this safety feature.

3. Do not leave fan running unattended.

4. Fan is rated for use as a window fan. Recommend removing from window

(unplugged) when raining.

5. Close supervision is necessary when any appliance is used by or near children.

6. Never insert fingers, pencils, or other foreign objects through the grill.

7. Disconnect fan when removing grills for cleaning. Reinstall before plugging into

power supply.

8. To protect against electrical shock, never immerse fan, cord of plug in water.

Avoid using volatile cleaners.

9. Avoid contact with moving parts.

10. Do not operate in presence of volatile or explosive fumes.

11. Do not place fan or any parts near an open flame, cooking or other heating

device.

12. Do not pull cord to disconnect, grip plug instead.

13. Do not hang or mount fan on a wall or ceiling.

14. Disconnect fan when moving from one location to another.

15. Be sure fan is on a stable surface when operating to avoid turning over.

16. Do not use outdoors.

17. Never operate fan with damaged electrical cord, plug, or when the fan

malfunctions. Avoid use of extension cords.

18. To avoid fire hazard, never place the cord under rugs or any part of an open

flame, cooking, or heating appliance.

19. This product is intended for household use only and not for commercial or

industrial applications.

20. Automatically Operated Device - To Reduce The Risk Of Injury Disconnect

From Power Supply Before Servicing.

CAUTION

WARNING

When using electrical appliances, basic precautions should always be followed to

reduce the risk of fire, electric shock and injury to persons, including the following:

1. The rules about cord and plug as below:

(1) This product employs overload protection (fuse). A blown fuse indicates an

overload or short-circuit situation. If the fuse blows, unplug the product from

the outlet. Replace the fuse as per the user servicing instructions (follow

product marking for proper fuse rating) and check the products. If the

replacement fuse blows, a short-circuit may be present and the product should

be discarded or returned to an authorized service facility for examination and/

or repair.

(2) Do not operate any fan with a damaged cord or plug. Discard fan or return to

an authorized service facility for examination and/or repair.

(3) Do not run cord under carpeting. Do not cover cord with throw rugs, runners,

or similar coverings. Do not route cord under furniture or appliances. Arrange

cord away from traffic area and where it will not be tripped over.

2. Never insert fingers, pencils, or any other object through the grille when fan is

running.

3. Disconnect fan when moving from one location to another, before putting on or

taking off parts.

4. Disconnect fan when removing grilles for cleaning.

5. Do not operate in the presence of explosive and/or flammable fumes.

6. Do not place fan or any parts near an open flame, cooking or other heating

appliance.

7. Always use on a dry, level surface, do not use outdoors.

8. Do not let the cord hang over the edge of a table, counter, or come in contact

with hot surfaces.

9. To disconnect grip plug and pull from wall outlet. Never yank on cord.

RULES FOR SAFE OPERATION

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare

parts with package contents list and diagram above. If any part is missing or

damaged, do not attempt to assemble the product.

Contact customer service for replacement parts.

Estimated Assembly Time: 5minutes

Tools Required for Assembly:Phillips Screwdriver (NOT INCLUDED)

Fig. 3

Fig. 1

23.9 in.

11.8 in.

Fig. 2

Pulls out up to 7.3 in.

PACKAGE CONTENTS

Part Description Quantity

Fan body

Speed button

Expandable panels

Feet

Screw

Right and Left intake/exhaust control lever

Part Description Quantity

HARDWARE CONTENTS

Quantity

Picture

(Shown to size)

ST2.9x9.5

Screw

Part

Description

• Push the feet (B) into the fan body (A) and snap together.

(Fig. 1). Fasten the two screws (D)from the bottom of the

feet.

• This window fan has been designed to fit double-hung,

slider and casement windows with minimum opennings

of 24.4 in. wide and 13 in. high. (Fig. 2)

• This fan is designed and recommended for use with your

window screen in place.

1. With the window fully open, set the fan in the window

with front (A) of fan facing the INSIDE.

2. Hold fan with one hand while adjusting panels (B) with

the other. Before closing window, pull open locks (C)

located at top and bottom on right/left side on fan, and

adjust expandable panel, if necessary.

3. Close the window on top of the fan with the bottom

edge of the window behind the lip of fan housing.

FOR DOUBLE-HUNG TYPE WINDOWS (Fig.3)

INSTALLATION INSTRUCTIONS

Fig. 4

1. Plug the cord into any standard 120-volt A/C outlet.

2. To turn the fan on, press the SPEED button (A) on the panel. Fan will start at low

speed.

3. Adjust speed to low, medium or high by pressing SPEED button. A light will turn

on for each speed selected (C). Stop the fan by pressing the SPEED button

successively.

4. To start and stop the temperature settings, press the TEMP button (B) to cycle

through the temperature setting. Minimum setting is 60º F; maximum setting is

80º F. The fan will operate only if the temperature you have set is less than room

temperature. A light will turn on indicating the selected temperature (C).

5. Set the individual fan motors on either IN (intake) or OUT (exhaust) using the

control lever (D).

OPERATING INSTRUCTIONS

4. If the fan still does not fit properly in the window, re-

adjust the expandable panel on right/left side of fan to

fill in remaining space between panel and window

frame until a secure fit is achieved.

1. Position the fan in the window with the power switch

(A) facing the center of the opening.

2. To adjust height, remove fan from window, extend the

expandable panel (B) until it matches the height of the window.

3. With the window fully open, position the fan in the window with power switch

facing the center of the opening.

4. Fan must fit securely against the inside edge of the window opening.

5. Slide the sliding window to meet the edge of the fan.

The side edge of the window must fit securely behind the lip of fan housing.

6. Adjust the expandable panel to fill in remaining space between fan and window

frame. Expandable panel locks into position by closing the locks once you establish

a fit.

FOR VERTICAL SLIDER-TYPE WINDOWS (Fig.4)

a) Grasp plug and remove from the receptacle or other

outlet device. Do not unplug by pulling on cord.

b) Open fuse cover. Slide open fuse access cover on

top of attachment plug towards blades.

c) Remove fuse carefully. Insert the tip of your tool into

fuse slot (close with the terminal), then prize the fuse

gradually and slowly, but not overexert. If you feel tight, you can try it at several

times and prize the fuse little by little. When one side of the fuse has been prized,

then you can get the fuse out entirely.

d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that

should not be removed. Discard product if the attachment plug is damaged.

Notice:

1. When you replace the fuse, please don’t operate suddenly or overexert, or else

the product will be damage or cause accident.

2. When you feel it hard to be operated, please make sure you have got the right way.

USER SERVICING INSTRUCTIONS

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed.

1. Before cleaning and assembling, do not plug the pins into the socket.

2. To ensure adequate air circulation to the motor. Keep vents at the rear of the

motor housing from dust, fluff and etc. A vacuum cleaner can not be used to

clean these vents before unplug. Do not disassemble the fan remove fluff.

3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.

Do not use any abrasive detergent or solvents to avoid scratching the sufrace.

Do not use of the following as a cleaner: gasoline, thinner, bending.

4. Do not allow water or any other liquid into the motor housing or interior parts.

MAINTENANCE INSTRUCTION

1. Be sure to unplug the power cord from the outlet before cleaning.

2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.

Thoroughly remove soap film with clean water.

3. Be sure not to get water or other liquid enter the inside of the motor.

4. Dry all parts completely before reassembling and reconnecting to power

source.

CLEANING

TROUBLE SHOOTING

noitcAevitcerroCesuaCelbissoPmelborP

The fan will not

operate.

The fan isn’t plugged in and/or the

electrical outlet isn’t working properly.

Make sure the fan is plugged in and/or

the electrical outlet is working properly.

The fan will not

operate.

Obstructions are keeping the fan from

working.

Check for obstructions. If you find an

obstruction, turn the fan off.

Unplug the fan and carefully remove the

obstruction. Plug the fan in and turn it

on again by referring to the operating

instructions.

For questions or comments,please write to:

Midea America Corporation

Customer Care Center

11411 NW 107th Street,

Suite 12 Miami, FL 33178

Email us at: [email protected]

1-866-646-4332

fan

ONE (1) YEAR LIMITED WARRANTY

Please read all instructions before attempting to use this product.

In the event of malfunctions or failure of your Fan, simply deliver or send the Fan,

postage prepaid along with PROOF OF PURCHASE, within the warranty period of one (1)

year, to Midea America Corporation. Midea America Corporation reserves the right to

inspect the claimed defective part or parts to determine if the defect or malfunction

complaint is covered by this warranty. Midea America Corporation shall, within sixty(60)days

after receipt of the product, at its option, repair and/or replace the defective part or parts free

of charge. This warranty shall only cover defect arising from normal usage. Midea America

Corporation assumes no responsibility whatsoever if the Fan should fail during the warranty

period by reason of:

Misuse, negligence, physical damage or accidents.

Lack of maintenance (see instructions for proper maintenance).

Repair by any unauthorized party during the warranty period.

Damage caused by connection to an improper input voltage (see specification

label on your Fan).

Midea America Corporation makes no further warranties or representations, express or

implied except those contained herein. No representative or dealer is authorized to assume

any other liability regarding the Fan. The duration of the implied warranty granted under

State law, including warranties of merchantability and fitness for particular purpose are

limited in duration should the duration of the express warranty grant it hereunder. Midea

America Corporation shall in no event be liable for direct, indirect, special or consequential

damages.

Some states do not allow limitations on how long an implied warranty lasts, and/or the above

limitations or exclusion may not apply to you. This warranty gives you specific legal rights

and you may have other rights which vary from state to state.

Midea America Corporation warrants as limited herein to the original purchaser of retail

thateach new Fan, shall be free of defects in material and workmanship for aperiod of

one (1) year from the date of original purchase. This one (1) year warranty is limited to

the Motor and Electric Element.

MANUAL DEL PROPIETARIO

VENTILADOR PARA VENTANA DE

22,86 CM (9 PULG.)

MODELO:FW23-8HS

ARTÍCULO: 667618

LEA Y GUARDE ESTAS INSTRUCCIONES

Table of contents

Languages:

Other Pelonis Fan manuals

Pelonis

Pelonis FZ10-19M User manual

Pelonis

Pelonis FZ10-9LR User manual

Pelonis

Pelonis FB50-17H User manual

Pelonis

Pelonis PSF40T2ABB User manual

Pelonis

Pelonis FS40-8M User manual

Pelonis

Pelonis FS45-9L User manual

Pelonis

Pelonis PBF15T4AWW User manual

Pelonis

Pelonis FS45-18UR User manual

Pelonis

Pelonis PFT28A2BWW User manual

Pelonis

Pelonis FZ10-9HB User manual

Pelonis

Pelonis FB50-16H User manual

Pelonis

Pelonis FT18-9K User manual

Pelonis

Pelonis PFT30T3ABB User manual

Pelonis

Pelonis FZ10-10JRH User manual

Pelonis

Pelonis FZ10-19JR User manual

Pelonis

Pelonis FW23-A4R User manual

Pelonis

Pelonis FZ10-19MB User manual

Pelonis

Pelonis FZ10-17JR User manual

Pelonis

Pelonis PSF20B3ABB User manual

Pelonis

Pelonis FZ10-19JR User manual

Pelonis

Pelonis FS40-16CR User manual

Pelonis

Pelonis PFT40A4AGB User manual

Pelonis

Pelonis FT30-16J User manual

Pelonis

Pelonis FS5-40A User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual