Pelonis FS40-8M User manual

MODEL: FS40-8M

ITEM:809480

OWNER’S MANUAL

16"STAND FAN

READ AND SAVE THESE INSTRUCTIONS

Read Rules for Safe Operation and Instructions Carefully.

CAUTION

1. To reduce the risk of fire or electrical shock, do not use this fan with any solid-

state speed control device.

2. If the power cord is damaged, it is strongly recommended to request a specialist

to handle.

3. This appliance has a polarized plug (one blade is wider than the other). To reduce

the risk of electric shock, this plug is intended to fit in a polarized outlet only one

way. If plug does not fit fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician. Do not attempt to defeat this safety feature.

4. Do not leave the fan running unattended.

WARNING

PART FIGURE

1. Never insert fingers, pencils, or any other object through the grille when fan is

running.Unplug the fan when moving it from one location to another.

2. Disconnect fan before cleaning.

3. Be sure fan is on a stable surface when operating to avoid overturning.

4. To reduce the risk of electric shock, DO NOT use fan by a window.

5. The rules about cord and plug as below:

(1) This product employs overload protection (fuse). A blown fuse indicates an

overload or short-circuit situation. If the fuse blows, unplug the product from

the outlet. Replace the fuse as per the User Servicing Instructions (follow

product marking for proper fuse rating) and check the products. If the

replacement fuse blows, a short-circuit may be present and the product

should be discarded or returned to an authorized service facility for

examination and/ or repair.

(2) Do not operate any fan with a damaged

cord or plug. Discard fan or return to

an authorized service facility for

examination and/or repair.

(3) Do not run cord under carpeting. Do not

cover cord with throw rugs, runners, or

similar coverings. Do not route cord

under furniture or appliances. Arrange

cord away from traffic area and where

it will not be tripped over.

RULES FOR SAFE OPERATION

External pole

Fastening bolt

6. Ensure the fan is switched off from the supply

mains before removing the grille.

OPERATING INSTRUCTIONS

1. Speed control

Speed is controlled by knob switch.

0--Off 1--Low 2--Medium 3--High

ROUND BASE & COLUMN UNIT ASSEMBLY

1. Take the base and pole assembly out of the box, Loosen the fastening bolt from

the bottom of the pole assembly (see Fig. 1) .

2. Put the pole assembly into the base, and lock them together by tightening

the fastening bolt (see Fig. 2) .

3. Loosen the height-adjustment ring and adjust the internal pole to desired

height. Note: If you can’t find the internal pole, it may have slid into the

external pole and can be pulled out (see Fig. 3) .

4. Loosen the thumb screw on the bottom of the head unit. Then place the

head unit on the pole and tighten the thumb screw in alignment with the

groove on the internal pole (see Fig. 4) .

Clip

GUARD & FAN BLADE ASSEMBLY

1. Take the Spinner out from the bag, then remove the plastic nut by turning it

counterclockwise.

2. Place the rear guard to the head unit make sure the handle is upward.

3. Screw on the plastic nut (clockwise) securing the fan guard on the head unit.

(Step 1,2,3 see Fig.5)

4. Install the fan blade onto the motor shaft. Make sure the fan blade slot fits into

the retaining pin of the motor shaft.

5. Attach the spinner to the motor shaft by turning it counterclockwise to secure the

fan blade. (Step 4,5,see Fig.6)

6. Mount the front guard and join both guards together using the Clips.

(Step 6 see Fig.7)

Loosen

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Annulargroove

Mounting hole

Thumb screw

Fig.5 Fig.6 Fig.7

CAUTION: Height adjustment ring must be fully fastened before the assembly

of the motor section to the internal pole.

The fan requires little maintenance. Do not try to fix it by yourself. Refer it to

qualified service personnel if service is needed.

1. Do not leave the unit plugged in while cleaning or assembling.

2. To ensure adequate air circulation to the motor. Keep vents at the rear of the

motor housing from dust, fluff and etc. A vacuum cleaner can not be used to

clean these vents before unplugging. Do not disassemble the fan to remove fluff.

3. Please wipe the exterior parts with a soft cloth soaked in a mild detergent.

Do not use any abrasive detergent or solvents to avoid scratching the surface.

Do not use of the following as a cleaner: gasoline, thinner, bending.

4. Do not allow water or any other liquid into the motor housing or interior parts.

MAINTENANCE INSTRUCTIONS

CLEANING

1. Be sure to unplug the power cord from the outlet before cleaning.

2. Plastic parts should be cleaned with mild soap and damp cloth or sponge.

Thoroughly remove soap film with clean water.

3. Be sure not to get water or other liquid enter the inside of the motor.

2. Clutch knob

Press down on clutch knob to oscillate the fan. To stop

oscillation, pull up on the clutch knob once the fan is in the

desired position.

3. Tilt adjusting

To adjust the air flow upward or downward, slightly push

the guards.

4. Height adjusting

From the external pole loosen the height adjustment ring and

adjust the internal pole to the desired height. (See Fig.3)

1. Grasp plug and remove from the receptacle or other

outlet device. Do not unplug by pulling on cord.

2. Open fuse cover. Slide open fuse access cover on top of

attachment plug towards blades.

3. Remove fuse carefully.Push the fuse from the other side

or turn fuseholder over to remove fuse.

4. Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.

6. Risk of fire. Do not replace attachment plug. It contains safety device (fuse) that

should not be removed. Discard product if the attachment plug is damaged.

Notice:

1. When you replace fuse, please don’t operate suddenly or overexert, or else the

product will be damage or cause accident.

2. When you feel it hard to be operated, please make sure you have got the right way.

USER SERVICING INSTRUCTIONS

For questions or comments,please write to:

Midea America Corporation

Customer Care Center

11800 NW100th Rd. Suite 4

Medley, FL 33178

[email protected]

1-866-646-4332

product

ONE (1) YEAR LIMITED WARRANTY

Please read all instructions before attempting to use this product.

In the event of malfunctions or failure of your Fan, simply deliver or send the Fan,

postage prepaid along with PROOF OF PURCHASE, within the warranty period of one (1)

year, to Midea America Corporation. Midea America Corporation reserves the right to

inspect the claimed defective part or parts to determine if the defect or malfunction

complaint is covered by this warranty. Midea America Corporation shall, within sixty(60)days

after receipt of the product, at its option, repair and/or replace the defective part or parts free

of charge. This warranty shall only cover defect arising from normal usage. Midea America

Corporation assumes no responsibility whatsoever if the Fan should fail during the warranty

period by reason of:

Misuse, negligence, physical damage or accidents.

Lack of maintenance (see instructions for proper maintenance).

Repair by any unauthorized party during the warranty period.

Damage caused by connection to an improper input voltage (see specification

label on your Fan).

Midea America Corporation makes no further warranties or representations, express or

implied except those contained herein. No representative or dealer is authorized to assume

any other liability regarding the Fan. The duration of the implied warranty granted under

State law, including warranties of merchantability and fitness for particular purpose are

limited in duration should the duration of the express warranty grant it hereunder. Midea

America Corporation shall in no event be liable for direct, indirect, special or consequential

damages.

Some states do not allow limitations on how long an implied warranty lasts, and/or the above

limitations or exclusion may not apply to you. This warranty gives you specific legal rights

and you may have other rights which vary from state to state.

Midea America Corporation warrants as limited herein to the original purchaser of retail

thateach new Fan, shall be free of defects in material and workmanship for aperiod of

one (1) year from the date of original purchase. This one (1) year warranty is limited to

the Motor and Electric Element.

VENTILADOR PEDESTAL 16" (40,6cm)

MODELO: FS40-8M

ARTÍCULO:809480

MANUAL DEL USUARIO

LEAYGUARDE ESTAS INSTRUCCIONES

1. Para reducir el riesgo de fuego o descarga eléctrica, no use este ventilador con

ningún equipo de control de estado solidó.

2. Si el cable de poder esta dañado se recomienda pedir la ayuda de un especialista.

3. Este aparato tiene un enchufe polarizado (una clavija o borne es mas ancha

que la otra). Para reducir el riesgo de descarga eléctrica, este enchufe esta

diseñado para caber en una toma corriente polarizado con única forma. Si el

enchufe no entrara completamente, invierta el enchufe, Si aun así no cabe,

contacte a un electricista calificado. No intente obviar este procedimiento de

seguridad.

4. No deje el ventilador funcionando sin atención de alguien.

PRECAUCION

ADVERTENCIA

Lea cuidadosamente y guarde estas instrucciones.

1. Nunca inserte sus dedos, lápices o cualquier otro objeto en el compartimiento

cuando el ventilador torre esta funcionando. Desconéctelo cuando vaya a

moverlo de un lugar a otro.

2. Desconecte el ventilador al limpiar.

3. Asegúrese que el ventilador esta en una superficie estable cuando funciona.

4. Para reducir el riesgo de descarga eléctrica o lesiones a personas, No utilice

en las ventanas.

5. Las reglas sobre los cordones y enchufes son las siguientes:

(1) Este producto utiliza la protección de sobrecarga (fusibles). Un fusible

quemado indica una situación de sobrecarga o corto circuito. Si se quema el

fusible, desconecte el producto de la toma. Reemplace el fusible de acuerdo

con las instrucciones de mantenimiento del propietario (seguimiento del

producto marcado para los fusibles adecuados) y examine los productos. Si se

quema el fusible de recambio, un corto circuito puede estar presente y el

producto se debe desechar o devolver a un centro de servicio autorizado para

su revisión y/o reparación.

(2) NO opere ningún ventilador con un cordón o enchufe dañado. Deseche o

devuelva el ventilador a un centro de servicio autorizado para su revisión y/o

reparación.

(3) NO arrastre el cordón por debajo de la alfombra. No cubra el cordón con

alfombras, tapetes o cubiertas similares. No encamine el cordón debajo de los

muebles o electrodomésticos. Arregle el cordón lejos de zonas de tráfico y

donde no se tropiece con ellos.

REGLAS DE OPERACION SEGURA

6. Asegurarse de que el ventilador está desconectado de la red de suministro

antes de quitar la rejilla

NOMBRE DE PARTES

ENSAMBLADO DE LA BASE REDONDA Y LA COLUMNA

Guarda Frontal Tuerca Plástica

Eje Del Motor

Botón De Oscilación

Interruptor

Caja Del Motor

Caja

Tornillo

Aspa De Ventilador

Apretar

Aflojar

Regilla Trasera

Aguja

Base Redonda

Tornillo

Anillo De

Adjuste

De Altura

Poste Interno

Mástil externo

Aflojar

Fig. 1 Fig. 2 Fig. 3 Fig. 4

Anillo

Ranuar

Tornillo

Perno de anclaje

1. Aflojar el perno de anclaje del tubo de extensión (Figura 1).

2. Insertar el tubo de extensión en el cahsis y ajustar el perno (Figura 2).

3. Aflojar el anillo de ajuste de altura desde el tubo de extensión y colocar el tubo

interno a la altura deseada (Nota: Si no encuentra el tubo interno, puede haberse

caído dentro del tubo de extensión) (Figura 3)

4. Para fijar la cabeza del ventilador al tubo interior, afloje el tornillo en la parte

inferior de la cabeza, colóquela en el lugar y ajuste el tornillo alinéandolo con la

ranura en el tubo interior. (Figura 4)

PRECAUCIÓN:El anillo de ajuste debe estar bien ajustado antes de instalar el

motor al tubo interior.

INSTRUCCIONES DE USO

1. Control de velocidad

La velocidad es controlada oprimiendo las teclas.

0 – Apagado, 1 – Baja, 2 – Media, 3 – Alta

2. Perilla de embrague

Presione esta perilla para que el ventilador oscile.

Para seleccionar una dirección, tire de la perilla cuando el

ventilador esté en la dirección que desea.

3. Ajuste de la inclinación

Para ajustar el flujo del aire hacia arriba o hacia abajo, empuje suavemente las

guardas en la dirección deseada.

4. Ajuste de la altura

Sujete el mástil de extensión, afloje el anillo de ajuste de la altura y ajuste el mástil

interno a la altura que desea. (Ver Fig. 3)

ENSAMBLADO DE LAS REJILLAS Y LAS ASPAS

1. Saca la hélice de la bolsa y retira la aguja girándola a las manecias del reloj, y

saca la hélice de la bolsa y retira la tuerca plástica girándola a las manecias del

reloj.

2. Coloque la guarda (derecha) trasera al cabezal y asegúrese de que el asa esté

hacia arriba.

3. Atornille la tuerca plástica (en el sentido del reloj) para fijar la guarda al cabezal.

(Pasos 1, 2, 3 ver Fig. 5).

4. Instale las aspas al eje del motor. Asegúrese de que las ranuras de las aspas

calcen en el pin del eje del motor.

5. Fije las aspas girando el buje en el eje del motor en sentido contrario al de las

agujas del reloj. （Pasos 4,5, ver Fig.6)

6. Asegure ambas rejillas firmemente apretándolas y cerrándolas con el clip.

(Pasos 7 ver Fig. 7)

INSTRUCCIONES DE MANTENIMIENTO

El ventilador no necesita mucho mantenimiento. No intente repararlo usted mismo.

Contacte a un centro de reparación calificado si es necesario.

1. No lo enchufe antes de limpiarlo o ensamblarlo.

clip

Aspa

Turerca

Plástica

Aflojar

Aguja

Ranura

Apretar

Aguta

Perno De

Retención

Apretar

Fig.5 Fig.6 Fig.7

Table of contents

Languages:

Other Pelonis Fan manuals

Pelonis

Pelonis FZ10-10JRH User manual

Pelonis

Pelonis FS45-18UR User manual

Pelonis

Pelonis FW23-8HS User manual

Pelonis

Pelonis FS45-9L User manual

Pelonis

Pelonis FT18-9K User manual

Pelonis

Pelonis FB50-17H User manual

Pelonis

Pelonis FT30-8MBWV User manual

Pelonis

Pelonis PFT30T3ABB User manual

Pelonis

Pelonis FTW18-D2 User manual

Pelonis

Pelonis FZ10-17JR User manual

Pelonis

Pelonis FS40-16CR User manual

Pelonis

Pelonis FZ10-19JR User manual

Pelonis

Pelonis NTH15-17BRA User manual

Pelonis

Pelonis PFS40A4BBB User manual

Pelonis

Pelonis PFT42A5BGB User manual

Pelonis

Pelonis FT40-8HC User manual

Pelonis

Pelonis FZ10-19JR User manual

Pelonis

Pelonis PFT30T2ABB-V User manual

Pelonis

Pelonis FZ10-9LR User manual

Pelonis

Pelonis FT30-14AU User manual

Pelonis

Pelonis FW23-A1 User manual

Pelonis

Pelonis PFT28A2BWW User manual

Pelonis

Pelonis FS40-G5 User manual

Pelonis

Pelonis FS45-3ER User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual